@george1421 6768.pcap Attached capture filter for ports 67 and 68. 192.168.200.1 is the VLAN gateway.
Latest posts made by cjiwonder
-
RE: UEFI is not booting with Windows DHCP
-
RE: UEFI is not booting with Windows DHCP
@george1421 There is no error message, “>>Start PXE over IPv4” message and after a minute booting to HDD. Fog Server and PXE boot client are in the same VLAN but DHCP server is in a different VLAN. Tried with snponly.efi, intel.efi and pexe.efi but no luck. There is no issue with the DHCP IP release if I boot the PC in Windows, and there is no issue in booting with undionly.exe on the same PC. I am new to Wireshark, please guide me to run the capture filter. Thanks.
-
RE: UEFI is not booting with Windows DHCP
@george1421 PXE is not booting, could you pls help me to resolve this issue?
-
RE: UEFI is not booting with Windows DHCP
@george1421 Already secure boot is disabled.
-
RE: UEFI is not booting with Windows DHCP
@JamiesonCA092 My NIC is intel, tried both ipxe.efi and intel.efi but no luck.
-
UEFI is not booting with Windows DHCP
I recently installed Fog server with Windows 2022 DHCP. I can boot with BIOS after changing the boot file to undionly.kpxe but I am unable to boot from UEFI with secure boot disabled after changing the boot file to snponly.efi.
I tried this settings also. [https://docs.fogproject.org/en/latest/kb/how-tos/bios-and-uefi-co-existence/#using-proxydhcp-dnsmasq](link url)
Can anyone please help me to resolve this issue.