@ITSolutions I’ll do a fresh install and see what I can do from there, and I will definitely the trunk of FOG as well. Is there a specific Ubuntu or any Linux OS you would recommend using? Preferably the most reliable, as I am planning to carry this setup into a work environment.

@ITSolutions I know a complete wipe is always the best option, but I did not do a complete wipe, just an upgrade to 14.04 and 1.2 from older versions.

@Wayne-Workman said in Client boots through FOG menu and into windows:

Why would you freshly install 0.32 ? Sorry but I can’t help you with that version. Please move to 1.2.0 or FOG Trunk preferably since this is a new installation. And use Ubuntu 14 or 15 please, or some other newer distribution.

We have ample guides to assist you with this in our Wiki.

After resetting the dhcp server the client does receive the correct DHCP IP , but TFTP times out. “PXE-E32: TFTP open timeout:”

@Wayne-Workman said in Client boots through FOG menu and into windows:

Why would you freshly install 0.32 ? Sorry but I can’t help you with that version. Please move to 1.2.0 or FOG Trunk preferably since this is a new installation. And use Ubuntu 14 or 15 please, or some other newer distribution.

We have ample guides to assist you with this in our Wiki.

I was following a youtube guide that used 12.04 and 0.32, was following it as closely as possible to avoid any problems.
I upgraded ubuntu to 14.04 and FOG to 1.2.0.
When I boot to the client it does not detect the server at the PXE screen and times out. I installed FOG while connected to the internet, after finishing the install, I plugged the Server box with FOG into a stand alone network switch where I have one client also plugged into it. I did set the static IP through FOG install, and through the UI of ubuntu as manual like the guides on the wiki say. I’m not for sure what I am missing.
Is there any settings I need to change or add now that I am running FOG 1.2.0?

Working on setting up a standalone network FOG server, running ubuntu 12.04 with FOG 0.32 freshly installed.
Server side, everything seems fine. Client side on PXE boot, it reaches and establishes connection, shows the FOG menu for about a second and goes directly to windows after it flashes the FOG menu. What can I do to stop the client from skipping the the FOG menu?