Posts made by Brenth453

@george1421 after doing step 1.

@george1421 Using an HP Prodesk 400 G4

@george1421

@george1421 Wireshark traffic shows pxe file pulling just fine. TFTP being reached through network. Confused as to why the DHCP isn’t pulling.

@george1421 I feel the need to add that I can do it to a virtual machine just fine. No trouble getting the lease.

@george1421 All switches have FastPort Active. Spanning tree status is running in rapid-pvst.

@george1421

Error is

udhcpc:no lease, failing
Either DHCP failed or we were unable to access http://myipaddress (unchanged since server creation and fog install) hp for connection testing.
No DHCP response on interface eth0, skipping it.
Failed to get an IP via DHCP! Tried on interfaces(s): eth0
Please check your network setup and try again!
Press enter to continue

Hello, I have setup FOG and configured it to work with our DHCP server. I am able to always PXE boot straight into fog, but then when trying to contact DHCP for a lease it just fails to get an IP after the third loop.

I was able to successfully get it to work and upload an image by switching the network during the DHCP lease process on my laptop, but ONLY on my laptop. Luxury of having different ethernet cables in the office go to different vlans.

We have the options configured correctly, have available IP’s in DHCP, I disabled the linux firewall, our network has no firewall within the WAN blocking anything. Any idea why I am not geting a DHCP lease and how to fix it?

Thank you,

Brent