Posts made by BBBBlaine

[quote=“Tom Elliott, post: 35659, member: 7271”]Kernels are now updated and available in svn or from my website.

[url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/bzImage[/url] (64bit)
[url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/bzImage32[/url] (32bit)[/quote]

You’re amazing! I downloaded the new kernels and replaced the old ones and my PE 2900 is now uploading an image to my Fog server!

Thank you so much for your help. This is a huge step in being able to replace our existing Acronis system with Fog.

[quote=“Michael Konz, post: 31327, member: 24796”]So now it looks like I have the same size pxe boot file as you, so I tried PXE booting the server again and…
[CODE]Could not configure console: Input/output error (http://ipxe.org/1d8c2139)
Could not boot: Input/output error (http://ipxe.org/1d8c2139)
Could not boot: Input/output error (http://ipxe.org/1d8c2139)[/CODE]

After some testing I think, that this should be a vesa framebuffer problem. This can be resolved by deleting line 540 (background picture) from /var/www/fog/lib/fog/BootMenu.class.php[/quote]

Sorry about the delay since my last post here…

I commented out line 540 of /var/www/fog/lib/fog/BootMenu.class.php like you suggested and it worked! I got to the Fog menu! However… When I try to do Quick Registration or Full Registration, I get an error:
[IMG]http://i.imgur.com/HSWXzOd.jpg[/IMG]
It continues until I see this:
[IMG]http://i.imgur.com/YDcuyv5.jpg[/IMG]

After that, it keeps scrolling down until I see nothing but a blank screen, and nothing appears in the Fog host inventory.

I tested PXE booting on a Dell Latitude D630 laptop (yes, very old, but it was the closest machine to me besides my workstation) and it worked with the undionly.kpxe boot image from [url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/[/url] !

The PowerEdge 2900 server still doesn’t boot with it… I will test with a different 2900 tomorrow to see if it’s just something wrong with this particular box or what. If it’s not working on any 2900, then I don’t think Fog could serve as a replacement for Acronis in our environment, as 90% of the servers we deploy to buildings are 2900’s.

[quote=“Tom Elliott, post: 30885, member: 7271”]The only files you should be trying are:
ipxe.pxe
ipxe.kpxe
ipxe.kkpxe
undionly.pxe
undionly.kpxe
undionly.kkpxe

I’d first start by trying the (same named) files in:
[url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/[/url]

Just replace the file name with undionly.kpxe (so you don’t have to change dhcp stuff).
Example:
[code]wget -O /tftpboot/undionly.kpxe https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/undionly.pxe
wget -O /tftpboot/undionly.kpxe https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/undionly.kpxe
wget -O /tftpboot/undionly.kpxe https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/undionly.kkpxe
wget -O /tftpboot/undionly.kpxe https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/ipxe.pxe
wget -O /tftpboot/undionly.kpxe https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/ipxe.kpxe
wget -O /tftpboot/undionly.kpxe https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/undionly.kkpxe[/code][/quote]

Okay I’m trying each of those one by one…
With undionly.pxe I get:
Reboot after “Initialising devices”

With undionly.kpxe I get:
[CODE]Could not start download: Operation not supported (http://ipxe.org/3c092003)[/CODE]
With undionly.kkpxe I get:
[CODE]Could not configure console: Input/output error (http://ipxe.org/1d8c2139)
Could not boot: Input/output error (http://ipxe.org/1d8c2139)
Could not boot: Input/output error (http://ipxe.org/1d8c2139)[/CODE]
With ipxe.pxe I get:
[CODE]transmit timed out…
transmit timed out…
transmit timed out…[/CODE]
With ipxe.kpxe I get:
[CODE]Configuring (net0 00:1e:c9:d7:ee:de)…
[/CODE] then the server reboots with no error message

EDIT maybe I will try this on a different machine to see if maybe there’s just some problem with this server… It is a Dell PowerEdge 2900 - refurbished (I mean the server I’m using to try PXE boot at least. The Fog server is a Virtual Machine on ESXi 5.5)

[quote=“ianabc, post: 30881, member: 24548”]
Actually BBBBLaine, now that I think about it, your default.ipxe IS going to be different from mine, it’ll have your fog server’s IP address in it. Can you verify that the contents of your ipxe file that is chain loaded look sane? (point a browser at [url]http://MY[/url] IP HERE/fog/service/ipxe/boot.php##params). Here’s mine
[CODE]
[COLOR=#000000]#!ipxe
cpuid --ext 29 && set arch x86_64 || set arch i386
colour --rgb 0xff6600 2
cpair --foreground 7 --background 2 2
console --picture http://MY IP HERE/fog/service/ipxe/bg.png --left 100 --right 80
prompt --key 0x1b --timeout 3000 Booting… (Press Escape to access the menu) && goto menuAccess || sanboot --no-describe --drive 0x80
:menuAccess
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param menuaccess 1
param debug 0
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:bootme
chain http://MY IP HERE/fog/service/ipxe/boot.php##params[/COLOR]
[/CODE][/quote]

Here is what I see when I browse to [url]http://10.1.0.21/fog/service/ipxe/boot.php##params[/url]
[CODE]#!ipxe
cpuid --ext 29 && set arch x86_64 || set arch i386
colour --rgb 0xff6600 2
cpair --foreground 7 --background 2 2
console --picture http://10.1.0.21/fog/service/ipxe/bg.png --left 100 --right 80
:MENU
menu
colour --rgb 0xff0000 0
cpair --foreground 0 3
item --gap Host is NOT registered!
item --gap – -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.sysinfo Client System Information (Compatibility)
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
exit || goto MENU
:fog.memtest
kernel memdisk iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=10.1.0.3 keymap= web=10.1.0.21/fog/ consoleblank=0 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=10.1.0.3 keymap= web=10.1.0.21/fog/ consoleblank=0 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.sysinfo
kernel bzImage32 root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=10.1.0.3 keymap= web=10.1.0.21/fog/ consoleblank=0 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
autoboot
[/CODE]

In this [URL=‘http://fogproject.org/forum/threads/dell-optiplex-320.10872/’]other thread[/URL] where the same issue seems to be happening, somebody suggested trying different boot files.

Tried undionly.kpxe.INTEL:
[CODE]http://10.1.0.21/fog/service/ipxe/boot.php… ok
http://10.1.0.21/fog/service/ipxe/bg.png...transmit timed out
transmit timed out
38%transmit timed out
transmit timed out
transmit timed out
51%[/CODE]

Tried undionly.pxe:
This boot file only reboots the server immediately after it loads. I don’t see anything useful come up on the screen.

Tried vesamenu.c32:
PXE doesn’t do anything after getting an IP from DHCP… just sits there.

Tried ipxe.kkpxe:
Just like with undionly.pxe… server reboots

Tried ipxe.kpxe:
Server reboots

Tried ipxe.pxe:
Server reboots

Tried ipxe.krn:
[CODE]This image cannot be loaded from a floppy disk.[/CODE] <-- What?? o.O

Tried pxelinux.0.old (it’s worth a shot, I guess):
[CODE]Trying to load: pxelinux.cfg/
Trying to load: pxelinux.cfg/44454c4c-5100-1057-804d-b2c04f4e4731
Trying to load: pxelinux.cfg/01-00-1e-c9-d7-ee-de
Trying to load: pxelinux.cfg/0A010106
Trying to load: pxelinux.cfg/0A01010
Trying to load: pxelinux.cfg/0A0101
Trying to load: pxelinux.cfg/0A010
Trying to load: pxelinux.cfg/0A01
Trying to load: pxelinux.cfg/0A0
Trying to load: pxelinux.cfg/0A
Trying to load: pxelinux.cfg/0
Trying to load: pxelinux.cfg/default
Unable to locate configuration file

Boot failed: press a key to retry, or wait for reset…
[/CODE]

At this point, I’m stuck.

Does anybody have a WORKING installation of Fog 1.1.1? If so, what distro of linux is it running on? Maybe I’m just running into a bug?

TylerC: I have this same issue when trying to PXE boot a PowerEdge 2900 server with a fresh Fog 1.1.1 install on Ubuntu 12.04
Here is the thread: [URL=‘http://fogproject.org/forum/threads/tftp-not-working-fog-1-1-1-on-ubuntu-12-04-server.10867/’]fogproject.org/forum/threads/tftp-not-working-fog-1-1-1-on-ubuntu-12-04-server.10867/[/URL]

Unfortunately, I haven’t found a solution yet either.

[CODE]root@PCI-FOG:~/fog_1.1.1/packages/tftp# cp undionly.kpxe /tftpboot/undionly.kpxe
root@PCI-FOG:~/fog_1.1.1/packages/tftp# chmod 644 /tftpboot/undionly.kpxe
root@PCI-FOG:~/fog_1.1.1/packages/tftp# ls -al /tftpboot/
total 2600
drwxr-xr-x 2 fog root 4096 Jun 19 14:39 .
drwxr-xr-x 25 root root 4096 Jun 18 08:11 …
-rw-r–r-- 1 fog root 840 Jun 17 13:35 boot.txt
-rw-r–r-- 1 root root 291 Jun 17 13:35 default.ipxe
-rw-r–r-- 1 fog root 389702 Jun 17 13:35 ipxe.kkpxe
-rw-r–r-- 1 fog root 389750 Jun 17 13:35 ipxe.kpxe
-rw-r–r-- 1 fog root 391231 Jun 17 13:35 ipxe.krn
-rw-r–r-- 1 fog root 389766 Jun 17 13:35 ipxe.pxe
-rw-r–r-- 1 fog root 25340 Jun 17 13:35 memdisk
-rw-r–r-- 1 fog root 16794 Jun 17 13:35 pxelinux.0.old
-rw-r–r-- 1 fog root 165088 Jun 17 13:35 snponly.efi
-rw-r–r-- 1 fog root 102777 Jun 17 13:35 undionly.kkpxe
-rw-r–r-- 1 root root 102825 Jun 19 14:39 undionly.kpxe
-rw-r–r-- 1 fog root 382650 Jun 17 13:35 undionly.kpxe.INTEL
-rw-r–r-- 1 fog root 102841 Jun 17 13:35 undionly.pxe
-rw-r–r-- 1 fog root 147728 Jun 17 13:35 vesamenu.c32
[/CODE]

So now it looks like I have the same size pxe boot file as you, so I tried PXE booting the server again and…
[CODE]Could not configure console: Input/output error (http://ipxe.org/1d8c2139)
Could not boot: Input/output error (http://ipxe.org/1d8c2139)
Could not boot: Input/output error (http://ipxe.org/1d8c2139)[/CODE]

The link in the error message says that the error originated from vesafb.c (line 114)
[CODE]/**
103 * Convert VBE status code to iPXE status code
104 *
105 * @v status VBE status code
106 * @ret rc Return status code
107 */
108 static int vesafb_rc ( unsigned int status ) {
109 unsigned int code;
110
111 if ( ( status & 0xff ) != 0x4f )
112 return -ENOTSUP;
113 code = ( ( status >> 8 ) & 0xff );
114 return ( code ? -EIO_VBE ( code ) : 0 );[/CODE]

I have no idea how to resolve this. Any ideas?

Okay I noticed something strange… TFTP’ing into the server from the local shell downloads the file, but it is 0 kb in size:
[CODE]root@PCI-FOG:~# tftp 10.1.0.21 -c get undionly.kpxe
root@PCI-FOG:~# ls -al undionly.kpxe
-rw-r–r-- 1 root root 0 Jun 19 11:51 undionly.kpxe
[/CODE]

I checked the original file and it also appears to be 0 kb:
[CODE]root@PCI-FOG:/tftpboot# ls -al
total 2496
drwxr-xr-x 2 fog root 4096 Jun 17 13:35 .
drwxr-xr-x 25 root root 4096 Jun 18 08:11 …
-rw-r–r-- 1 fog root 840 Jun 17 13:35 boot.txt
-rw-r–r-- 1 root root 291 Jun 17 13:35 default.ipxe
-rw-r–r-- 1 fog root 389702 Jun 17 13:35 ipxe.kkpxe
-rw-r–r-- 1 fog root 389750 Jun 17 13:35 ipxe.kpxe
-rw-r–r-- 1 fog root 391231 Jun 17 13:35 ipxe.krn
-rw-r–r-- 1 fog root 389766 Jun 17 13:35 ipxe.pxe
-rw-r–r-- 1 fog root 25340 Jun 17 13:35 memdisk
-rw-r–r-- 1 fog root 16794 Jun 17 13:35 pxelinux.0.old
-rw-r–r-- 1 fog root 165088 Jun 17 13:35 snponly.efi
-rw-r–r-- 1 fog root 102777 Jun 17 13:35 undionly.kkpxe
-rw-r–r-- 1 fog root 0 Jun 18 11:51 undionly.kpxe
-rw-r–r-- 1 fog root 382650 Jun 17 13:35 undionly.kpxe.INTEL
-rw-r–r-- 1 fog root 102841 Jun 17 13:35 undionly.pxe
-rw-r–r-- 1 fog root 147728 Jun 17 13:35 vesamenu.c32
[/CODE]

So I deleted undionly.kpxe and renamed undionly.kkpxe to undionly.kpxe now.

I tried PXE booting another server and it comes up with an error when trying to boot:
[CODE]
iPXE 1.0.0+ (7fe0) – Open Source Network Boot Firmware – http://ipxe.org
Features: NFS FTP HTTP HTTPS iSCSI DNS TFTP VLAN AoE bzImage ELF MBOOT PXE PXEXT Menu
Configuring (net0 00:1e:c9:d7:ee:de)… ok
Could not start download: Operation not supported (http://ipxe.org/3c092003)
PXE-M0F: Exiting Broadcom PXE ROM.[/CODE]

Now what? I’m wondering if I’m using the correct boot file, or if it got messed up somehow during installation o_O

ianabc: Yes, downloading the file works from the fog server itself with the command “tftp 10.1.0.21 -c get undionly.kpxe”

I can SSH to this server from my workstation, and the hosts.allow/hosts.deny files don’t have anything in them but comments.

Sorry, meant to type tftpd-hpa. I added “sleep 30” to the beginning of /etc/default/tftpd-hpa

I saw that restarting TFTP was a common fix for this type of issue, however, it didn’t fix it in my case.

I even added a 30 second delay on tftp-hpa service startup, but this did not resolve it.

I installed a fresh instance of Ubuntu server 12.04 on a VM, then downloaded and installed Fog 1.1.1.

We already have a dhcp server on the network, so I chose not to use Fog as the dhcp server. I added the dhcp options 66 and 67 as follows on our Windows dhcp server:
66 10.1.0.21
67 undionly.kpxe

When attempting to PXE boot a server, it gets an IP address… however, it doesn’t seem to do anything after that. It doesn’t even show that it’s timing out or anything.

When I try connecting with a Windows TFTP client using the command “tftp 10.1.0.21 get undionly.kpxe” it times out.

I checked to make sure ufw is disabled on the Fog server, and there is no iptables.

[CODE]root@PCI-FOG:~# netstat -a | grep ftp
tcp 0 0 *:ftp : LISTEN
udp 0 0 *:tftp :
[/CODE]
So is TFTP not running correctly?

What could the problem be?