Topics created by Basavarajnc

@Sebastian-Roth

Dear Sir,

Thank you for your kind reply.

Basavaraj, From India.

@Sebastian-Roth

Dear Sir(Sebastian-Roth),

I understood (Not Everything) what you explained about My Questions…

You explained that not to define DNS Address in My Network Scenario…
But I already defined it with this Address10.10.1.2

Now Whether it is possible to remove it OR let it be as it is…?

Kind Hardheartedly Thank you For In Time Help…

Kind Regards,

Basavaraj, From India.

@Sebastian-Roth

Dear Sir (Sebastian-Roth),

Sir, One Word … You are Real Great Sir…

I am totally frustrated with Error…Till Now.

Now It has got solved. Now running successfully…

Devotedly and Willingly Thankful to You Sir. Real Great…

Sincerely Yours,

Basavaraj From India,

@Basavarajnc said in is it required Internet During the Installation of FOG and It's Configurations...:

Now My Question is : is it required Internet During the Installation of FOG and at the time of Configurations…?

Yes this is a requirement. The latest kernels, inits, and precompiled binary files are downloaded as part of the installation. Also if your linux distribution is missing required dependencies the FOG installer will install them too. So yes internet access is required ONLY for installing and updating FOG.

If you have a dedicated imaging network that is isolated from internet access, you can install a second network adapter in your fog server that has internet access if required by your network design.

@Sebastian-Roth

Dear Sir(Sebastian-Roth),

Heartily Thank you for your kind Reply. Little bit Time is required to try … I am sorry that… it is becoming Delay. Actually I am Student, Linux Learner and Side by Side Technical work to be done. So Please Give me Some Time.

Thanking you Sir,

Basavaraj From India,

@Basavarajnc said in how to configure 2 Network Interfaces..One for Internet and Second for FOG Server..?:

This eth1 is for FOG SERVER (Static)
auto eth1
iface eth1 inet static
address 192.168.147.XXX
netmask 255.255.255.0
network 192.168.147.0
broadcast 192.168.147.255

The above thing is enough configuration of eth1 to make Fog Server Successful?

is it OK Sir OR need to do any extra Configurations over here ?

Heartily Thank you for kind Reply

Basavaraj From India.

@Basavarajnc said in It takes longer Time (More Than 5 Minutes) Erasing current MBR/GPT tables.:

Now My Question is … Manually Written the file ->“bzImage4183” in the Host Kernel Field… is it Correct Sir?
Thereafter, I updated by using Update Button in the Make Changes? Field… is it Correct Sir?

Yes this is correct. This field allows you to assign a specific kernel to a specific host. That is the design of FOG. No this is not correct. You have hard defined for that host it will only use bzImage4183. The main and updatable kernel is called bzImage. When the next version of FOG is released (1.5.5) it will only update bzImage. The host where you statically defined bzImage4183 will continue to us that kernel forever.

Also Sebastian’s fix also requires you to update the init.xz files to completely eliminate the delay during disk format creation. So both the kernel (bzImage) and the virtual hard drive (init.xz) need to be updated to correct this problem.