Posts made by amadrigal

@george1421 thanks for the help. I think the problem is something related to this igmp proxy. I am now trying to clone by multicast two virtual machines that receive an 192.168.1.x ip from the dhcp in a pfsense box. The fog server is a container in proxmox. The error says something about ip 192.168.0.50 , and that is the pfsense interface, so I installed igmp proxy in pfsense , I have the 2.3 version., but it is still failing. This is the configuration just for the lan, if it works, i’ll put the rest of the vlans later ¿there is something wrong with it?

@sebastian-roth The clients are in vmbr2

@sebastian-roth thanks for the help. I have been looking at the thread you told me and put a multicast route in my proxmox , but it doesnt work.
The network is this way: I have several physical interfaces, but only two of them are implied.
The first one is physically plugged to a fiber route, and is the one used to get to the internal apache servers. Now in proxmox is eth2, bridged by vmbr1, ip 192.168.0.150, gateway 192.168.0.1 which is the fiber router.
The second one, is the one that gets to the internal network with about 40 different vlans. it is eth1 uses bridge vmbr2.
The fog server has an ip for each vlan.
This picture is from de proxmox server, is the multicast route right?

@wayne-workman 1.5

I have a problem with multicast. I have proved it in two virtual machines in the same physical pc as the fog server. I have proved with udp-sender and udp-receiver in two physical pc’s in a switch of the LAN and it worked, but when I put the task to work, both pcs stop waiting for the packets to come.
in multicast logs says: "problem getting data from client: operation not supported .
Any ideas?