Posts made by alehpons

Ok, but I said because the “menu icons” aren’t in spanish.

Thank you for your response

Hi there, can I help us to translate FOG to spanish language?

I want help us with this project

Edit: I was using EXT4 partition

Works FOG with 3 primary partitions and 1 extended partition with 4 logical partitions?

Helo, I’m trying to upload a Ubuntu 13.10 instalation to FOG Server and it shows me:

[I]The bluescreen shows, in 2 or 3 seconds, the bluescreen close and shows:[/I]
[I] Image uploaded[/I]
[I] Show the bluescreen counter again…[/I]
[I] /dev/sda2 are damaged or invalid filesystem[/I]
[I] Image uploaded[/I]
[I] Show a bluescreen again (counter %)[/I]
[I] Image upload sucessfully[/I]

[I] Now I check the size of created/uploaded image and…[/I]
[I] d1.mbr - 512 B[/I]
[I] d1p1.img - 904 B <-------- Edited[/I]

Why doesn’t works?

Thanks

Thank you, Tom. The issue is solved.

Yes, I’m trying this. Within a short time I will comment on the results

It was a bootloader problem, is solved.

But the loop in “Boot from the Local disk” is persistent.

1 PXE boot>
2 Boot From Local Disk>
and the program stops.

Do not start the local hard drive.

[quote=“Tom Elliott, post: 24240, member: 7271”]If you can go back to the original pxelinux.0 file that came with 0.32, you’ll be back in the same state. However, this is good!. Because if you look up chainloading and follow those instructions, your issue should be easily dealt with.

Thank you,[/quote]

Yes, I did that but the problem with EMBR is persistent

Hi, I’m using FOG 0.32 and i have one problem.

When I select the “Boot local hard disk” entry, the prompt shows me “Booting from local disk” and It doesn’t nothing more.

I tried to change the /tftpboot/pxelinux.0 from pxelinux.0 older versions and It shows me PXE image was found and nothing more.

I’m triying to copy and restore an image with EMBR (BootIt partition manager) but in the PC restored there is a failure con the EMBR:

BootIt EMBR 4.0

EMBR missing, system halted

Thank you for any help