@Uncle-Frank

Hi

It success upload image now.\0/. THANKS

Any private IP address can be set. In virtualbox environment, I just want to test that the Fog server is able to contact with client DIRECTLY without any dhcp server in the middle between fog server and client…This is what I did

step 1
just install fog server with you reference link or wiki.when it comes to part saying “If you already have DHCP configured, Press NO to disable FOG DHCP”…click YES. the reason is you want your fog server act as dhcp server and will give IPs to client.

step 2
Make sure both client and fog server interface adapter on virtualbox are set into Internal Network. On client system boot order on virtualbox, set to harddisk first.

Step 3
Set static IP for server and set obtain DHCP on client.(fog server will give IP to client)

Step 4
On Fog server run command ufw disable, service tftpd-hpa restart and service isc-dhcp-server restart. While on client just monitor until client received IP from FOG server. Once received IP, test both can ping each other.

Step 5
Once both can ping each other, install FogPrep on client then click shutdown. On Fog server run upload image (follow reference link)

Step 6
Go to client system boot order, change to Network. and then start client virtual. Fog GUI will appear.

Done.

@ch3i

\0/ THANKSS…fixed!!

@Uncle-Frank
the client Virtualbox machine is 4.3.26 and virtualbox where fog server are install is 5.0.4…
Im not allow to install wireshark on our dhcp server…

Hi

Just to give better picture here…Im running fog server on virtualbox which the virtualbox itself is inside the windows server 2012. the virtualbox was set bridged adapter.

Then I have separate existing DHCP server which pointing to fog server I had enable option 066 and 067.

For testing clients I use one virtualbox which received dhcp from existing dhcp server and one physical machine which is HPcompaq Elite 8300.

So both clients gave same output error…

According to uncle frank, he didnt see any dhcp on my log.pcap…I did check dhcp server many times and follow these link(https://wiki.fogproject.org/wiki/index.php/Modifying_existing_DHCP_server_to_work_with_FOG) still no luck.

@ch3i

DHCP seems to be ok

@ch3i

with or without task the fog iPXE appear but then after this show up on client it then reboot again

@Wayne-Workman

fog 1.2.0
Linuxmint(rafaela)
HPcompaq Elite 8300

I also test boot my virtualbox to network also got error…

Hi

I got this error and attached is my log.pcaplog.pcap

Hi

since microsoft constantly release windows patches, I would like to know if the fog server has the capabilities to do windows update on uploded image stored on fog server?if not is there any solution for that?

@ch3i

\0/ THANKSS…fixed!!

When I tried to deploy Image…I got this error.

How to fix this?

@Uncle-Frank

Hi

It success upload image now.\0/. THANKS

Any private IP address can be set. In virtualbox environment, I just want to test that the Fog server is able to contact with client DIRECTLY without any dhcp server in the middle between fog server and client…This is what I did

step 1
just install fog server with you reference link or wiki.when it comes to part saying “If you already have DHCP configured, Press NO to disable FOG DHCP”…click YES. the reason is you want your fog server act as dhcp server and will give IPs to client.

step 2
Make sure both client and fog server interface adapter on virtualbox are set into Internal Network. On client system boot order on virtualbox, set to harddisk first.

Step 3
Set static IP for server and set obtain DHCP on client.(fog server will give IP to client)

Step 4
On Fog server run command ufw disable, service tftpd-hpa restart and service isc-dhcp-server restart. While on client just monitor until client received IP from FOG server. Once received IP, test both can ping each other.

Step 5
Once both can ping each other, install FogPrep on client then click shutdown. On Fog server run upload image (follow reference link)

Step 6
Go to client system boot order, change to Network. and then start client virtual. Fog GUI will appear.

Done.