Posts made by abra4242

@george1421 Thanks George ; in the BIOS menu it says UEFI Bios Version, which would lead me to believe it’s UEFI and not legacy, so I put the ipxe.efi in option 67. So - I should be able to PXE boot / capture the image now?

@george1421

Thanks for REplying George

1. Version 1.4.4
2. Target Computer is a Lenovo Thinkpad T520
3. NOt sure what you mean by this as i’m trying to capture a WIndows 7 image from a Windows 7 machine " At what point does the target computer reboot? FOS [customized linux that runs on the target computer] should say something is wrong and will reboot in 1 minute if it detects an error. A clear picture of this error taken with a mobile will help diagnose the issue "
4. On option 66 I have the IP address of the FOG Server and option 67 is pxelinux.0
5. When PXE Boot is attempted, it finds everything but times out at TFTP then exits the intel boot agent.

Also,

When I say the machine reboots i’m talking about the machine that i’m trying to pull the image from. Sorry if I wasn’t descriptive enough. Trying to use this as our PXE Boot / imaging software. Any help is greatly appreciated.

Hey all,

So I have FOG Completely setup. I’m doing the Hosts at the moment, when I try to capture an image from the host this is what i’m getting ; and the machine continually reboots. Any ideas?