Posts made by abde

@george1421 Thanks I will try this on Monday and get back to you.

Hello,

Can we integrate a script to FOG or a solution exists to remove all the messages and questions at Windows startup like WDS.

Given that to create an image it is necessary to make a sysprep not to have the same SID. I find myself at the deployment with all the messages and acceptance of Windows concerning the connection, the data transmitted to windows.

Thank you for your help

@george1421 je comprend , je ferai un autre post pour les prochaines question.
Nous avons réussi a faire l’image et retirer les message d’erreur (c’était un problème de sysprep) et la non présence de l’agent fog sur le poste.

Merci beaucoup de votre aide et je penserai à crée des topic pour les différents problème rencontrer afin d’aider la communauté.

@george1421 In addition, the C-type adapter is not recognized for the pxe. Only in usb.

@george1421 Hello George.
Hello George,

we had different problem (see attachment)

the first image was fixed by putting the fastboot (2nd image) in minimal for the capture and for the deployment.

3rd image during the deployment we have an error message but the deployment still works.

4th image at the time of starting the pc after deployment, one has systematically this error message.

Can you help us.

thank you

1er https://ibb.co/64HzCjs
2e https://ibb.co/5cwDhnW
3e https://ibb.co/sHvxt0z
4e https://ibb.co/rQPSQDp

@george1421
hello,

I have a problem when i boot with my laptop in pxe.

I send you a picture with the error message

Do you have an idea of the problem

https://ibb.co/64HzCjs

@george1421 I changed the mac address of the registration to that of the PC. For the moment the capture is done. But we do all the tests and we come back to you

Thanks a lot

@george1421 Now that you mention it, we tried with two pc’s and the mac address on fog was the same. It probably gets the mac address from the usb adapter. Do you have a solution for this?

We use dell latitude 5320.

Thanks

@george1421 We have managed to update the kernel. We tried to save it, no error. It goes up on fog. However, after the registration, on the pc it always puts “Host is Not Registered”.

Is there any other update to do?

Thank you for your help

@george1421 Hello

I update manually the kernel on fog interface but i only see the oldest version of kernel (4.19.145) but the latest version is 5.10.71.

I send you some pictures after the installation of the kernel.

https://ibb.co/V2BWyGc
https://ibb.co/yFqg5x7
https://ibb.co/BBrc2Fk

@george1421 said in problème d'enregistrement d'un pc latitude sur fog:

As I asked you before, is your FOG server isolated from the internet by a web proxy server?

The server Fog is not isolated from the internet by a web proxy server

@george1421 hello,

I did everything you told me, but I still have the kernel page that does not allow you to update it.

Have you ever encountered this problem.

https://ibb.co/Tvm8FxY

@george1421 said in problème d'enregistrement d'un pc latitude sur fog:

OK

Thanks you very much, I will try tomorrow and I will come back to you

@abde https://ibb.co/XXQtSbG
https://ibb.co/Tvm8FxY

@abde In the picture below you will find the fog version as well as the kernel version which is 4.19.145.

We have no way to update Kernel Versions. When you go to the tab, a message is displayed.

Do you have a solution to update it?
 

@george1421 FOS Linux see the hard drive.
Vous trouverez dans la photo ci-dessous la version de fog ainsi que la version du kernel qui est la 4.19.145.

Nous avons aucun moyen pour mettre Kernel Versions à jour. Quand on va dans l’onglet, un message s’affiche.

Auriez-vous une solution pour le mettre à jour ?
 

@george1421 Thank you for answering,

The problem is when i boot with AHCI in the Sata Operation, the laptop don’t want to register in fog. This is the problem we have.

We have a latest version of fog (1.5.9)

FRANCAIS

Bonjour,

j’ai plusieurs problèmes avec mon serveur de déploiement Fog. j’ai un pc portable dell latitude 5320.

1- Quand je met mon pc portable en mode RAID On dans “sata Operation” et que je veux démarrer en pxe , il me met “disk not found”

2- Quand je met mon pc portable en mode AHCI , le pc portable démarre en pxe sans aucun problème mais n’enregistre pas le pc sur le serveur FOG. Aucun message d’erreur n’apparait.

Auriez-vous déjà rencontré ce problème. Si oui, quelle est la solution pour résoudre ce problème.

Merci d’avance

ENGLISH

Hello,

I have several issues with my Fog deployment server. I have a 5320 latitude PC.

1- When I put my laptop in RAID On mode in “sata Operation” and I want to start in pxe, it puts “disk not found”

2- When I put my laptop in AHCI mode, the PC starts up in pxe without any problem but does not save the laptop on the FOG server. No error message appears.

Have you ever encountered this problem? If so, what is the solution to solve this problem.

Thank you in advance