@Sebastian-Roth Im using ubuntu
Latest posts made by spooninbrian
-
HTTPS FOG GUI webpage
Is there a way to make the fog management web gui https?
-
RE: Can capture windows 10 host. But when I deploy it won't boot. Just get blue Screen. Dell UEFI boot
Thanks guys! You all have been so helpful. I figured out that you don’t have to select the FOG Boot screen to select the Hard drive boot. It goes right into pxe.
It’s cut our deploy time from an 1 hour and 15 - 30 minutes to like 10 minutes.
If it becomes a further issue I’ll keep the post deploy scripts in mind.
Thanks again!
-
RE: Can capture windows 10 host. But when I deploy it won't boot. Just get blue Screen. Dell UEFI boot
So I figured out what the deal is.
When I use REFIND_EFI, I have to pxe boot into the FOG Client menu, then select boot from Hard Disk, which then creates the windows boot manager back into the UEFI allowing windows to boot again.
-
RE: Can capture windows 10 host. But when I deploy it won't boot. Just get blue Screen. Dell UEFI boot
Okay,
I just captured and deployed using the REFIND_EFI exit method and the windows boot manager is not there now.
I can boot to the OS from the FOG menu, but if I attempt to just boot from the Hard Disk it does not boot.
I was using EXIT prior to this.
-
RE: Can capture windows 10 host. But when I deploy it won't boot. Just get blue Screen. Dell UEFI boot
I think this may be my issue.
It’s UEFI Boot, not BIOS but the terminology is loosely used.
So if it’s a UEFI boot loader using GPT then I should use REFID_EFI for the capture and deployment?
-
RE: Can capture windows 10 host. But when I deploy it won't boot. Just get blue Screen. Dell UEFI boot
It’s literally just a blue screen then it cuts back out.
I’m going to reimage using the Dell OS recovery as that reset the BIOS for another machine.
I’m really new to all of this. Reimaging another machine that had the same issue with Dell Recovery OS fixed the boot order in the Bios. I’m going to try to the same on this machine I deployed to and see if that fixes it. I will then attempt another deploy.
I’m not sure what to do for the BIOS exit.
Here is what I have currently.
-
RE: Can capture windows 10 host. But when I deploy it won't boot. Just get blue Screen. Dell UEFI boot
The machines are the same model with the exact same specs.
Both machines are in UEFI mode.
I did a multiple partition non-partition non-resizable, as well as a single disk resizable and both with the same result.
When I look in the bios the end machine that I captured the image from has windows boot manager in the bios while the one I deployed too does not.