@george1421 cat /etc/os-release

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)
VERSION_ID=10

Next Server IP address was wrong on DHCP server. TFTP is working now! Thank you @george1421

@george1421 Looked into this and it is exactly what I am looking for. Thank you very much George.

@sebastian-roth Yes, I was able to capture and deploy to a smaller disk but it was Windows 10 20H2, the newest version, that I used.

I am currently building a 2004 master machine though as we are having issues with our exchange server on the new 20H2 build. I will be capturing and deploying that image today. I’ll let you know the results.

@sebastian-roth Yes, I was able to capture and deploy to a smaller disk but it was Windows 10 20H2, the newest version, that I used.

I am currently building a 2004 master machine though as we are having issues with our exchange server on the new 20H2 build. I will be capturing and deploying that image today. I’ll let you know the results.

@sebastian-roth Great, that seemed to have worked perfectly. I was able to capture and deploy my image now and confirmed that it used the new init-201114.xz. Thank you very much.

@sebastian-roth Sebastian, I’m having this same issue and would like to try with the init.xz. How would I go about doing so?

Good afternoon all, is it possible to change the FTP service used by FOG (vsftpd.service) to an SFTP service? Thank you in advance.

@george1421 cat /etc/os-release

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)
VERSION_ID=10

@george1421 uname -a

“Linux raspberrypi 4.19.97-v7- #1294” … “armv7l GNU/Linux”

@Sebastian-Roth I’m using Raspbian on a Raspberry PI 3B+ … FOG 1.5.8

@george1421 I’m using Raspbian on a Raspberry PI 3B+ … Let me know if you need any more info/error logs

I was able to replace “libcurl3” with 'libcurl4" in the config.sh file and that seems to be working.

Good afternoon, I am trying to install the newest fog version but it is failing at the same spot each time. It goes through the installation prompts then starts installing packages, when it gets through the packages to the step “Installing now everything is updated” it is failing. The only package I see that failed install is libcurl3. I tried to install this package manually but it says “Package libcurl3 is not available but is referred to by another package” and prompts me to install libcurl4 which I already have…

I have never had this issue installing fog in the past on this same device. I have tried multiple devices on multiple networks but am getting the same error each time. Can anyone lend a minute? Thanks.