Hi all,
I would like to thank you all for your help. I installed the latest trunk and i am able to inventory and install the image on it. Hopefully i will not be getting to many bugs from now on.
Best posts made by sfayle
-
RE: Problem HP Probook 650 G2 (intel l219)
-
RE: Problem with Fog version 6667
Hi guys, i just noticed that my reply from friday is not there. I did the installation of the last version of Fog. I still had the same problem. I then tried to install another image and this time it worked. (It did not work previously after the update!) So i used my backup copy of my images and everything is ok now. Thank you for your help again!
-
RE: Fog setup on Hyper-V
Good morning everyone! I appoligise for not replying any sooner. I did some testing and this i was able to solve my problem. I realized that i was able to PXE boot from a physical machine. Just not with a virtual machine with Windows 7 X64 in Hyper-V. I found a post that explain to use a legacy network card. I did the change and i was able to register my VM in FOG. Thank you all for your help. Incase, here is the link i found…
https://www.petri.com/boot-hyper-v-virtual-machine-using-pxeGood day Yall!
Latest posts made by sfayle
-
RE: Storage node almost full
Hi all,
I wanna thank everyone for their support. I was able to free up my storage node in the dashboard by login in my Ubuntu Server via Putty and erasing the images that were supposed to be erased in /images.Have a great day!
-
RE: Storage node almost full
I think i just found what i did wrong. If i delete from image management. The dashboard does not update. If i go in image management, choose an image then delete, i have an option to delete storage. Butfor now is there a way make my dashboard accurate? Thank you.
-
RE: Storage node almost full
Ok thank you. if the image is erase from the gui. Is there another way to delete it? Thank you
-
RE: Storage node almost full
Thank you. How do i delete the image definition in webif?
-
Storage node almost full
Hi,
I’m sure this is an easy answer. My storage node is almost full. I erase the images that are no longer required. But on the dashboard, it show still as full. Irebooted the server in case. Thank you in advanced. -
RE: Fog setup on Hyper-V
Good morning everyone! I appoligise for not replying any sooner. I did some testing and this i was able to solve my problem. I realized that i was able to PXE boot from a physical machine. Just not with a virtual machine with Windows 7 X64 in Hyper-V. I found a post that explain to use a legacy network card. I did the change and i was able to register my VM in FOG. Thank you all for your help. Incase, here is the link i found…
https://www.petri.com/boot-hyper-v-virtual-machine-using-pxeGood day Yall!
-
RE: Fog setup on Hyper-V
@george1421 Ok thank you for you reply. I change option 67 to snponly.efi?
At this time, i am trying to buid a template on a VM (Windows 7 X64) in Hyper-V. My DHCP server is in fact Server 2012. -
RE: Fog setup on Hyper-V
Option 67 in DHCP = undionly.kpxe
Option 66 in DHCP = IP adress of FOG server
The intended target OS is Windows 7. If i disable secure boot, the PXE is not detected. -
Fog setup on Hyper-V
Good morning everyone. I have to setup Fog in an Hyper-V environment. I installed Ubuntu Server 14.04-4 LTS and Fog 7009. The web interface is working fine. I am able to boot PXE but i am getting these message…
- Station IP adress is x.x.x.x
- Server IP is x.x.x.x
- NBP filename is undionly.kpxe
- NBP filesize is 92249 Bytes
- Succesfully downloaded NBP file.
- Boot Failed. EFI network. Failed Secure boot Verification
- Boot failed. EFI SCSI Device.
- No Operating System was loaded…
In the past, I installed Fog server on a Physical machine, On VirtualBox and ESXi without any problem. Any help on my problem? Is is compatible? I saw many post about performance issue with Hyper-V. So i assume it is compatible? Thanks!
-
RE: Problem with Fog version 6667
Hi guys, i just noticed that my reply from friday is not there. I did the installation of the last version of Fog. I still had the same problem. I then tried to install another image and this time it worked. (It did not work previously after the update!) So i used my backup copy of my images and everything is ok now. Thank you for your help again!