@Wayne-Workman said:
Do you have this area in 1.2.0 ?
FOG Configuration -> iPXE Boot Menu -> Exit to Hard Drive TypeIf so, play around with that setting. Not every type is supported by every machine. The default is normally Sanboot style.
Actually, that was a good recommendation, when I changed it in the FOG admin/config http interface. Helped for some for sure! Thx
@Wayne-Workman Just to confirm - where do I change the bootfile – is that in the HTTP Fog administrator interface or somewhere in a config file on ubuntu? Thx 
I have Unbuntu 10.0.4 , Fog 1.2.0 and Dell Optiplex 390 machines.
When the DHCP engages the TFTP load, I get some machines that load the menu fine but some machines are getting this error :
http://prntscr.com/7s6nu1
The log for DHCP shows this:
http://prntscr.com/7s6fzb
Finally, the dhcp.conf file looks like:
http://prntscr.com/7s6p7c
Any clue on this or assistance? Much appreciated in advance…
Okay… I think that may have fixed it for some - not all. I’ll respond when I’m sure if its gone or not.
Thank you
So I have Unbuntu 10.0.4 , Fog 1.2.0 and Dell Optiplex 390 machines. They all hang on boot after the FOG menu tries to proceed to boot the HDD. Blinking cursor. I’ve seen it in the forums mentioned before, but what is the final answer on this?
I tried changing the tftp chainloader per these instructions :
https://wiki.fogproject.org/wiki//index.php/Boot_looping_and_Chainloading
but it didn’t solve it.
Is there a working solution I’m missing in the forums here?
Thanks in advance…