Problem with deployment in a physical machine / connection timeout

[Tom Elliott]

This sounds an aweful lot like the nic of the fogserver is setup in Nat mode vs. bridged mode. I say this because of the “it works in virtual systems, but not on physical machines.”

[Andre]

@Tom-Elliott My Fogserver is setup in bridged mode

[Andre]

Nobody has a solution for my problem ?

[george1421]

@Andre There has to be something we are not seeing here.

Lets just recap where we are here.

1. You have a new fog server that is running FOG 1.3.5 that is a physical server (not really relevant that its physical)
2. Your fog server’s IP address is 192.168.230.10
3. Your target computer IS talking to the FOG server because it can check in, plus FOS does load and is running.
4. NFS is sharing the proper directories.
5. NFS is timing out in that it can’t connect.

Possible issues.

1. The firewall is running on the FOG server blocking nfs mounting.
2. selinux is not set to permissive on the FOG server.
3. There is some kind of screening router between the target computer and FOG server
4. Not all of the nfs services are running on the FOG server
5. Since there is a second fog server in the environment maybe it is playing a part in the target computer’s booting process that is unknown to us.

Since the target computer can’t seem to mount the nfs share on the physical fog server and you have a second virtual fog server, I would try to mount the nfs shares on the phy fog server from the vm fog server to confirm that nfs is working on the phy fog server.

from the vm fog server

mount -t nfs 192.168.230.10:/images /mnt
ls -la /mnt
umount /mnt

The above command should mount the images share on the phy fog server, list the contents of the directory and then unmount the images directory. When you run this command I would expect to see something like this:

drwxrwxrwx  5 fog  root 4096 Apr  4 06:37 .
drwxr-xr-x 25 root root 4096 Apr 15 21:35 ..
drwxrwxrwx  3 fog  root 4096 Apr  4 06:37 dev
-rwxrwxrwx  1 fog  root    0 Sep 24  2016 .mntcheck
drwxrwxrwx  2 fog  root 4096 Sep 24  2016 postdownloadscripts

Not directly related to your issue, i would update your FOG server to the latest RC build of 1.4.0 to test to see if 1.3.5 is the issue. Only do this on your phy fog server.
https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk

[Andre]

@george1421 I just have one server FOG and it is virtual. I don’t have a Physical server FOG.

[Andre]

@george1421 I tried to mount what do you said, in a Virtual machine, on which I have already capture his image. But when I execute the command “mount -t nfs 192.168.230.10:/images /mnt”, in FOS engine. It say “connection refused”.

[Andre]

@george1421 I tried with these commands in FOS Engine, with my virtual machine :
mkdir /images
mkdir /images/dev
mount -o nolock,proto=tcp,rsize=32768,intr,noatime 192.168.230.10:/images /images
mount -o nolock,proto=tcp,rsize=32768,intr,noatime 192.168.230.10:/images/dev/ /images/dev

And it works, I can mount

[Andre]

@george1421 And when I tried to do the same thing in my physical machine, it doesn’t work

[george1421]

@Andre This is not logical.

back on the fog server can you execute this command:

cat /etc/exports

You should get something that looks like this

/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

The key to look for is the space, star ( * ) right after the share name. This restricts nfs access to specific hosts. The start means everyone.

[Andre]

@georgI have the same lines as you

[george1421]

@Andre Well then…

On the fog server can you run this command

rpcinfo -p
You will get an output like this

   program vers proto   port  service
    100000    4   tcp    111  portmapper
    100000    3   tcp    111  portmapper
    100000    2   tcp    111  portmapper
    100000    4   udp    111  portmapper
    100000    3   udp    111  portmapper
    100000    2   udp    111  portmapper
    100003    2   tcp   2049  nfs
    100003    3   tcp   2049  nfs
    100003    4   tcp   2049  nfs
    100227    2   tcp   2049
    100227    3   tcp   2049
    100003    2   udp   2049  nfs
    100003    3   udp   2049  nfs
    100003    4   udp   2049  nfs
    100227    2   udp   2049
    100227    3   udp   2049
    100021    1   udp  44805  nlockmgr
    100021    3   udp  44805  nlockmgr
    100021    4   udp  44805  nlockmgr
    100021    1   tcp  39255  nlockmgr
    100021    3   tcp  39255  nlockmgr
    100021    4   tcp  39255  nlockmgr
    100005    1   udp  37435  mountd
    100005    1   tcp  45499  mountd
    100005    2   udp  40066  mountd
    100005    2   tcp  33852  mountd
    100005    3   udp  59675  mountd
    100005    3   tcp  33362  mountd

The keys are to ensure that you have at least one portmapper and nfs and nfslockmgr entry.

And then please run this command
sudo ipables -L
The output should look like this:

Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination     

The last check is to ensure selinux has been set to permissive. The key is current mode == permissive.
sestatus
output:

SELinux status:                 enabled
SELinuxfs mount:                /selinux
Current mode:                   permissive
Mode from config file:          permissive
Policy version:                 21
Policy from config file:        targeted

[Andre]

@george1421 Ok, for the first command I have this :

For the second command (sudo ipables -L), it says command not found

And for the third command (sestatus). I have to install “policycoreutils” and I have do this. And the result of the command “sestatus” :

[Tom Elliott]

@Andre This still sounds, very much, like a “NAT” vs. “Bridged” network problem.

I say this BECAUSE the connection is allowed from virtual space, but not a real machine.

Particularly your FOG Server is IP Address 192.168.230.10.

What’s the IP address your physical machines are pickin gup.

[Andre]

@Tom-Elliott The IP address of my physical machine is 192.168.230.23. I can ping my server FOG and my server FOG can ping my physical machine.

[Tom Elliott]

@Andre From the Physical machine can you please run:

passwd

Set a simple password
Hit me in chat
I want to remote in and help if at all possible via AnyDesk.

[Andre]

@Tom-Elliott where I run this command ?
And my network is a local network. I don’t have access to internet.

[Tom Elliott]

The passwd command would be on the machine you’re trying to image from.

If your machine that IS connected to the internet is able to communicate to your fogserver and your computer trying to be imaged, then the local network doesn’t need internet.

[Andre]

@Tom-Elliott I can’t run this command in my physical machine in cmd. My physical machine turns on Windows 10

[Tom Elliott]

@Andre You’re trying to image it? You would boot it like you’re doing an imaging task.

Make the task a debug by checking the “Schedule as Debug” before confirming the tasking.

[Andre]

@Tom-Elliott ok, but if you want to remote, I must have access to internet in my physical machine.