PXEboot with Netgear router

[Sebastian Roth]

@gabbas Something seems to be wrong here with tcpdump on your FOG server. After starting it you should see at least one or two lines of information. Something like this:

fog@fog:~$ sudo tcpdump -w output.pcap port 67 or port 68 or port 69 or port 4011
[sudo] password for fog:
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes

The command sits there and waits. Leave it like this and fire up your client till you see the error message on the client. Then stop tcpdump (Ctrl+c) and upload the output.pcap file to the forums.

[gabbas]

@Sebastian-Roth …I think something is missing in my configuration…Good thing is we are getting a server soon so that will take care of DHCP…I will update the outcome here asap…many thanks…You guys are great…I have Fog setup (which I manage in out department at a university) and it works there like a charm without an issue…I dont know why its not working here…But I will figure it out…(with your assistance…)