Remove a Registry Key

george1421

How can I use the .reg file to delete the key ?!

regedit.exe /s "mykey.reg"

Then in your mykey.reg file you need this syntax with all of the other normal prefix settings

[-HKEY_LOCAL_MACHINE\SOFTWARE\TightVNC]

Also know that the short name hklm may not be what reg is looking for, you may need the full name there. I have not tried it only offering a suggestion. The FOG Client/snapins run as SYSTEM so it should have full access to the registry even with UAC enabled.

george1421

@Tom-Elliott said in Remove a Registry Key:

Are you sure that is the location of the key, or is it in HKLM\SOFTWARE\WOW6432Node\TightVNC

Oh yeah, depending on what version of VNC is installed (32 or 64 bit) the key path will be different. Good catch on that Tom.

maouu

@george1421 Thanks, I’ll already test with the full name but it’s same issues.
I’m on W10 64bits system
I’ll test with: regedit.exe /s “mykey.reg”

@Tom-Elliott Thanks you too but my registry key is in HKLM\SOFTWARE\TightVNC
On HKLM\SOFTWARE\WOW6432Node\ i’ve nothing

Thanks you

Tom Elliott

@maouu Can you run the reg delete from the command line as is?

maouu

@Tom-Elliott Yes it’s work perfectly ^^

george1421

@maouu said in Remove a Registry Key:

On HKLM\SOFTWARE\WOW6432Node\ i’ve nothing

FWIW then you have the 64 bit version of tightvnc installed otherwise this key would be populated.

maouu

@Tom-Elliott It work from the commande line but when i made a snappin it’s not work.
I have a code 0 but my registry key is not update…

My snappin :
regedit.exe /s “http://192.168.1.6/fog/package/FOG/Key_TightVNC.reg”

My key.reg :

[HKEY_LOCAL_MACHINE\SOFTWARE\TightVNC]

[HKEY_LOCAL_MACHINE\SOFTWARE\TightVNC\Server]
“ExtraPorts”=“”
“QueryTimeout”=dword:0000001e
“QueryAcceptOnTimeout”=dword:00000001
“LocalInputPriorityTimeout”=dword:00000003
“LocalInputPriority”=dword:00000000
“BlockRemoteInput”=dword:00000000
“BlockLocalInput”=dword:00000000
“IpAccessControl”=“192.168.2.0-192.168.2.255:2,192.168.3.0-192.168.3.255:2,192.168.4.0-192.168.4.255:2,192.168.7.0-192.168.7.255:2,192.168.8.0-192.168.8.255:2”
“RfbPort”=dword:0000170c
“HttpPort”=dword:000016a8
“DisconnectAction”=dword:00000000
“AcceptRfbConnections”=dword:00000001
“UseVncAuthentication”=dword:00000001
“UseControlAuthentication”=dword:00000001
“RepeatControlAuthentication”=dword:00000001
“LoopbackOnly”=dword:00000000
“AcceptHttpConnections”=dword:00000001
“LogLevel”=dword:00000000
“EnableFileTransfers”=dword:00000001
“RemoveWallpaper”=dword:00000001
“UseMirrorDriver”=dword:00000001
“EnableUrlParams”=dword:00000001
“Password”=hex:58,34,c1,bd,a2,5d,20,a0
“ControlPassword”=hex:62,77,1e,20,2d,c1,2a,b6
“AlwaysShared”=dword:00000000
“NeverShared”=dword:00000000
“DisconnectClients”=dword:00000001
“PollingInterval”=dword:000003e8
“AllowLoopback”=dword:00000000
“VideoRecognitionInterval”=dword:00000bb8
“GrabTransparentWindows”=dword:00000001
“SaveLogToAllUsersPath”=dword:00000000
“RunControlInterface”=dword:00000001
“IdleTimeout”=dword:00000000
“VideoClasses”=“”
“VideoRects”=“”

george1421

@maouu I know tightvnc, so I’m going to ask what is your goal here. Do you want to preset these values using regedit? If so there is a different way to go about this that we use.

maouu

@george1421 At the beginning I just wanted to make a script to uninstall VNC completely and cleanly so I could reinstall it with the right settings on my computer park.
I realized that just by editing the registry [HKEY_LOCAL_MACHINE \ SOFTWARE \ TightVNC \ Server] it worked.

I want to add the following elements:

“IpAccessControl” = “192.168.2.0-192.168.2.255: 2,192.168.3.0-192.168.3.255: 2,192.168.4.0-192.168.4.255: 2,192.168.7.0-192.168.7.255: 2,192.168.8.0-192.168.8.255: 2”

“QueryTimeout” = dword: 0000001e

“QueryAcceptOnTimeout” = dword: 00000001

When I run my script:
regedit.exe / s “http://192.168.1.6/fog/package/FOG/Key_TightVNC.reg” I get a code 0 in Host Snapin History but the registry is not changed

george1421

@maouu Here is how we deploy with PDQ Deploy (sorry I don’t use snapins but the install function is similar:

  @Echo Off

  start /wait dfmirage-setup-2.0.301.exe /verysilent /norestart

  REM Hack to determine arch of this system
  IF EXIST C:\Windows\SysWOW64\diskpart.exe GOTO :x64

:x86
  msiexec /i tightvnc-2.7.10-setup-32bit.msi /qn /norestart ADDLOCAL="Server" SERVER_REGISTER_AS_SERVICE=1 SERVER_ADD_FIREWALL_EXCEPTION=1 SERVER_ALLOW_SAS=1 SET_USEVNCAUTHENTICATION=1 VALUE_OF_USEVNCAUTHENTICATION=1 SET_PASSWORD=1 VALUE_OF_PASSWORD=<SetMe!!> SET_USECONTROLAUTHENTICATION=1 VALUE_OF_USECONTROLAUTHENTICATION=1 SET_CONTROLPASSWORD=1 VALUE_OF_CONTROLPASSWORD=<SetMe2!!> SET_IPACCESSCONTROL=1 VALUE_OF_IPACCESSCONTROL="192.168.0.0-192.168.255.255:2,0.0.0.0-192.167.255.255:1,192.169.0.0-255.255.255.255:1" SET_REMOVEWALLPAPER=1 VALUE_OF_REMOVEWALLPAPER=1


:x64
  msiexec /i tightvnc-2.7.10-setup-64bit.msi /qn /norestart ADDLOCAL="Server" SERVER_REGISTER_AS_SERVICE=1 SERVER_ADD_FIREWALL_EXCEPTION=1 SERVER_ALLOW_SAS=1 SET_USEVNCAUTHENTICATION=1 VALUE_OF_USEVNCAUTHENTICATION=1 SET_PASSWORD=1 VALUE_OF_PASSWORD=<SetMe!!> SET_USECONTROLAUTHENTICATION=1 VALUE_OF_USECONTROLAUTHENTICATION=1 SET_CONTROLPASSWORD=1 VALUE_OF_CONTROLPASSWORD=<SetMe2!!> SET_IPACCESSCONTROL=1 VALUE_OF_IPACCESSCONTROL="192.168.0.0-192.168.255.255:2,0.0.0.0-192.167.255.255:1,192.169.0.0-255.255.255.255:1" SET_REMOVEWALLPAPER=1 VALUE_OF_REMOVEWALLPAPER=1


:Exit
  REM Install done, errors generated by msi will be reported to installer
  net stop "TightVNC Server"
  net start "TightVNC Server"
  rmdir /s /q "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\TightVNC\"

I’m pretty sure if you reinstall with the new parameters they will overwrite what is in the registry. I know this ISN’T what you are looking for, but it works for us.

Remove a Registry Key

211

12.0k

17.3k

155.2k