trying to sysprep windows 10 to upload to fog. PLEASE HELP
-
Server
- FOG Version: 1.3.1
- OS: windows10
after I run sysprep and capture the image the computer goes through the process the I get the computer restarted unexpectedly error and I have found that if I hit shift + F10 I can change the child completion from 1 to 3 but on the image it captured it is still set to 1 and will give me the same error after I deploy the image. Am I going to have to do this every time I deploy this image? I am working on a Dell Optiplex 5040 and injected the drivers for that model only but have tried it several different ways from editing the answer file to injecting the dell family cab drivers… I am lost please help.
Client
- Service Version:
- OS:
Description
-
@ryan-mckenzie if you are using the new client, please follow the instructions here: https://wiki.fogproject.org/wiki/index.php?title=FOG_Client#FOG_Client_with_Sysprep
-
@Joe-Schmitt I will try this! I am still new to fog and appreciate your help THANK YOU!
-
@Joe-Schmitt
does it matter where I place the commands in the file? -
@ryan.mckenzie The lines for
setupcompleteshould be placed at the end (since once the restart command is issued, the script can’t do anything else). -
@Joe-Schmitt Thank you again! I am going to try it as soon as I can get my base image configured.
-
@Joe-Schmitt ok I believe I have everything correct… Now I am getting a restart loop after the image is captured… Any thoughts on this?
-
@Joe-Schmitt can upload my unattend file if you would like me too
-
@ryan-mckenzie how many times does it restart? Because it should normally restart 3 or so times (so the client can undo the generalization done by sysprep)
-
@Joe-Schmitt infinite
-
@Joe-Schmitt i apologize for being such a pain but I have never had this much trouble with fog before
-
@ryan.mckenzie at this point it’s an issue with how the image is being made (either your unattend file or setupcomplete) before capturing. Could you post both?
-
@Joe-Schmitt Will do! give me a few minutes please
-
-
For anyone following this thread, I am working with @ryan.mckenzie via chat.
-
-
@Joe-Schmitt here is after running sysprpep (no capture)
-
-
@ryan.mckenzie once i changed the HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\ChildCompletion from 1 to 3 it loaded… Have you had anyone else with this problem? it seems to have saved the image and is loading at the moment.
I need to redeploy to make sure it loads correctly that way or if it gives me the same error. -
@ryan.mckenzie Failed. gave me the same error message and the HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\ChildCompletion is set back to 1…
