BZImage...No such file or directory when trying to start an image

[Shannon Render]

The setting looks fine on the server.

[george1421]

@Shannon-Render Is it also fine in the storage node configuration?

[Shannon Render]

You guys are amazing…thanks for the help with fixing this. I am currently imaging the laptop right now with your help. It was missing at the storage node level. I created a storage node and I must have had a typo.

[Tom Elliott]

@Shannon-Render So you have trunk installed?

[Tom Elliott]

Never mind, I’m a dumbass:

@Shannon-Render said in BZImage...No such file or directory when trying to start an image:

I am currently running FOG git version 7613 but was currently running 1.2.0 stable.

[ryan.mckenzie]

@george1421 Hopefully you will see this I am still new to fog, where do I find the Storage node configuration? I am running the latest version of fog and am getting this error. I can download from the web browser to confirm the kernel is there but keep getting the error below.!

[0_1487944212491_error.jpg](Uploading 100%)

[Tom Elliott]

@ryan.mckenzie I can’t tell if your image uploaded appropriately.

[ryan.mckenzie]

@Tom-Elliott

[ryan.mckenzie]

@Tom-Elliott This is the error I get

[Tom Elliott]

@ryan.mckenzie So the problem is your host (Host->Edit->Host Kernel), (or possibly FOG Configuration Page->FOG Settings->TFTP Server->FOG_TFTP_PXE_KERNEL is set incorrectly)?

Please change the “bzImage412” to be “bzImage”

[ryan.mckenzie]

@Tom-Elliott yes it works for other models with the default bzImage. I was trying to load this kernel 4.1.2 for an optiplex 780. only having trouble on this model of computers

[ryan.mckenzie]

@Tom-Elliott

[Tom Elliott]

@ryan.mckenzie Then check the host in the host page.

[ryan.mckenzie]

@Tom-Elliott

[Tom Elliott]

@ryan.mckenzie Remove the /var/www/fog/service/ipxe/bzImage412 from that host in the host kernel field

[ryan.mckenzie]

@Tom-Elliott ok removed

[Tom Elliott]

@ryan.mckenzie now try booting the machine and let the magic begin!

[ryan.mckenzie]

@Tom-Elliott ok this is where I get stuck using the default kernel… It loads bzImage… ok
init.xz… ok

then it is stuck here. does not go any further, this is why I was trying a different kernel. Any ideas?

[Tom Elliott]

@ryan.mckenzie Did the 412 kernel work in the past?

[ryan.mckenzie]

@Tom-Elliott never had tried it before… Could my image be bad? Some other system admins i know recommended I try it