Mounting file system: Failed. Uploading my first image

[Miguel Palacios]

@george1421 ok, tell you:

1. I have created a new image (NEW-5420)
2. I launched a capture task with debug capture
3. The laptop has started the FOS shell
4. I have tried to run the showmount -e 10.6.82.2 but the shell response this:

bash: showmount: command not found

?? is this possible?

Also I had tried to run the mount 10.6.82.2:/images /prueba (the path /prueba exist, I had created it this previously) and I get this error:

mount: mounting 10.6.82.2:/images on /prueba failed: Connection time out

[george1421]

@Miguel-Palacios OK, bad advice from me to try to use the showmount command. I thought it was part of the FOS system.

But what is now interesting (I think we are getting close to the problem) while you are in that command shell (by the way, you did great getting here) is to run the following commands.

ip addr show This will tell us if the FOS client is picking up an IP address. I will suspect yes since you are getting this far.

ping 10.6.82.2 to prove you can reach the FOG server from the FOS client.

'ssh root@10.6.82.2` to see if you have full connection to FOG server. (just guessing that ssh is part of the FOS environment).

You already tried the nfs command and received a timeout. If you have success with all of these then we need to focus on nfs on the FOG server. Something is missing then.

[Miguel Palacios]

@george1421 this part seems that is correct… The IP is obtained, the PING is successful and the SSH connection is established.

We guess that the problem is on NFS… right? I saw that rpc.svcgssd, a NFS service, is stopped… is this a problem?

Thank for your help!

[Sebastian Roth]

@Miguel-Palacios There is one thing I noticed:

*/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images/dev (rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

Just a typo with the ‘*’?? It should be like this - please check your /etc/exports again:

/images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

As well please post the output of sudo iptables -L -n -v on your FOG server here!

[Miguel Palacios]

@Sebastian-Roth Sorry, when I tried write in italics the system “it ate” the asterisk… The /etc/exports seems be correct. Also I show here the output of sudo iptables -L -n -v

[george1421]

@Miguel-Palacios OK, it looks like the FOS client is OK on that target computer.

(step next…)

On the FOG server lets see if we can map itself (also answer Sebastians’s question about iptables).

mount -t nfs <fog_server_ip>:/images /mnt

That should mount the fog servers /images share over the top of the /mnt directory. If you cd /mnt you should see the same content as in the /images folder.

Just so I don’t forget disconnect this mount with umount /mnt.

Have you rebooted this FOG server since you started having a problem? This issue is very strange indeed.

[Sebastian Roth]

I suggest using the nolock option when mounting NFS: mount -t nfs -o nolock <fog_server_ip>:/images /mnt

[Miguel Palacios]

@george1421 and @Sebastian-Roth, the command mount working with itself:

Yes, I have restarted several times, incluse I resintalled the system… U_U

[Sebastian Roth]

@Miguel-Palacios Then try the exact same mount command from the client again! In debug mode that is!

[Miguel Palacios]

@Sebastian-Roth the problem continues…

[Quazz]

@Miguel-Palacios Hi, can you run exportfs -r on your FOG Server, post the output here and try again on the FOGclient? (if it doesn’t work, try exportfs -r a second time)

[Miguel Palacios]

Hi @Quazz , this command executed in the server not show nothing… is it normal?

[Quazz]

@Miguel-Palacios I believe it only gives output if there’s an error, so that’s good news already.

[george1421]

@Miguel-Palacios Please provide the output of sudo iptables -L -n -v

[Miguel Palacios]

@Quazz I have executed other new capture task and the error is the same that my first post
On the other hand, of new, I have executed other new capture task (with debug activate) and I have executed the command mount but this again returned the same error.
In the side server, the command exportfs -r continues without show nothign…

[Quazz]

@Miguel-Palacios What’s the output of rpcinfo -p?

[Miguel Palacios]

@george1421 here it’s

[Miguel Palacios]

@Quazz the result for rpcinfo -p

[george1421]

@Miguel-Palacios said in Mounting file system: Failed. Uploading my first image:

@george1421 here it’s

Sorry for being stubborn here, but what you are seeing is not logical. I don’t doubt it is happening, its just confusing.

[Miguel Palacios]

@george1421 I am in the same situation…

Say you that the FOG server is installed in a virtual machine on VMware ESXi 5.5.0 (3116895)… I don’t know if this detail shed light at problem…