Bugs in FOG 0.33
-
Yeah, lib/pages/HostManagementPage.class.php checks if the hostname already exist… But obviously, if I’m editing it, it obviously exists hehe… too tired to fix, but that’s not cool, it requires a name change every time I update a host
-
I will look into that, sorry!, it’s more for if the name is being changed.
-
Should be fixed with r976 build, both of these things.
-
r977 release,
Should address wrong image type setting for capone if using that plugin.
-
Error in installation script (CentOS 6.5). When installing on a brand new setup I get an error at line 239: confirmPackageInstallation: command not found. Also error Failed to start NFS Server and setupFreshClam (had to manually install DAG repository to install htmldoc and clamav, but clamav seams to fail on Centos.
-
Not sure about the confirmPackageInstallation error, I’ve seen that issue, though it’s cause no real problems. It seems like, for some reason, it’s not calling sourcing the right file. This is fine by itself, though as it’s only the process that confirms if a package has installed.
NFS Server issues shouldn’t be an issue, though it’s probable because of when I had to fix the database issue. Centos checks if the packages mysql, mysql-server, and php-mysql are installed and if they’re not, it checks for mariadb, mariadb-server, and php-mysqlnd, I think it’s here that we’re seeing the confirmPackageInstall error.
To fix the NFS issue, perform:
[code]service rpcbind restart; service nfs restart[/code]
Then try again. It should be fine.I’ve not tested 6.5, but for clamav to install properly, it needs the elrepo packages, not the dag packages, verify that this is the case!
-
Chinese language?? After installing (testing user interface) most menues seams to appear in Chinese language? Why, I have not entered any setting about this?
-
[quote=“Tom Elliott, post: 18431, member: 7271”]Not sure about the confirmPackageInstallation error, I’ve seen that issue, though it’s cause no real problems. It seems like, for some reason, it’s not calling sourcing the right file. This is fine by itself, though as it’s only the process that confirms if a package has installed.
NFS Server issues shouldn’t be an issue, though it’s probable because of when I had to fix the database issue. Centos checks if the packages mysql, mysql-server, and php-mysql are installed and if they’re not, it checks for mariadb, mariadb-server, and php-mysqlnd, I think it’s here that we’re seeing the confirmPackageInstall error.
To fix the NFS issue, perform:
[code]service rpcbind restart; service nfs restart[/code]
Then try again. It should be fine.I’ve not tested 6.5, but for clamav to install properly, it needs the elrepo packages, not the dag packages, verify that this is the case![/quote]
Hm, I wrote dag but I think I installed elrepo as epel-release-6-8.noarch.rmp Right?
-
dag’s repo typically install clamav and freshclam in different locations that the elrepo packages. At least when I’ve had to play with my mailserver clamav setup!
-
I’ve uploaded a new revision to try addressing these issues. I don’t know if it’s all fixed, but the rpcbind/nfs issue should be now!
-
[quote=“Tom Elliott, post: 18435, member: 7271”]I’ve uploaded a new revision to try addressing these issues. I don’t know if it’s all fixed, but the rpcbind/nfs issue should be now![/quote]
Thanks, works now except one: line 288 setupFreshClam: command not found on Centos 6.4 and elrepo defined.
-
for htmldoc, install rpmforge repo. I installed on clean install of centos 6.4 and had no issue.
-
[quote=“pmonstad, post: 18432, member: 17422”]Chinese language?? After installing (testing user interface) most menues seams to appear in Chinese language? Why, I have not entered any setting about this?[/quote]
You can choose the locale to use on the login screen, maybe it has the wrong one selected?
-
Hi!
This may not be a bug as such, but more of a request for help on a Windows 8 deployment issue I’m having in fog 0.33 during testing. Hope that’s ok!
I have successfully uploaded an image of a Windows 8 laptop (disabled secure boot and changed to legacy BIOS before upload), however I swap out the hard drive for a brand new blank disk, but when i deploy the image (again, secure boot disabled and legacy BIOS) the task completes instantly following the ‘Checking Hard Disks’ section of the deploy process. It passes the ‘Restoring MBR’ section, then passes the ‘Checking Hard Disks’ section and comes back with ‘Task Completed’ instantly, no image progress screen.
I’m guessing this is because the new disk is not pre formatted/partitioned, but i assumed FOG would take care of that from the existing image that i uploaded?
Can anyone please confirm for me?
Many Thanks
LA -
I’ve not, fully, tested Windows 8 and imaging yet, but I would venture to guess you’re saying the drive has never been initialized quite yet. What revision of FOG are you working with? Is it a partimage or partclone setup?
I ask because I’ve had to make a few changes to how the partitions are created, and it sounds like it’s failing in creating the partitions when it needs to.
Everything I’ve tested with many of the latest changes seems to have worked well, but I have not quite yet gotten to test Windows 8, which I’m sorry.
-
I am using fog0.33b latest build as far as I know ( not sure how to check through) I have manged to upload a windows 8 image , using legacy boot devices, and have then deployed that image to another pc, worked ok. however each time I deploy an image after the partclone bit the the pc updates database , get cat:co.txt:no such file or directory…followed repeatedly by no active task found for host…( attached image) also I dont believe multicast is working with 0.33b , any update or help with any of these issues would be appriciated , thanks everyone !!
[url=“/_imported_xf_attachments/0/475_20140110_131704_resized.jpg?:”]20140110_131704_resized.jpg[/url]
-
Correct - brand new drive that hasn’t been initialized. Working on FOG rev 1016, so I can upgrade to latest revision and try that if there have been fixes with partitioning since. Will give that a go and let you know.
Thanks!
LA -
That would be awesome, I’ve made quite a few discoveries/changes since then.
Please try updating, 1080 - 1083 had a few changes (1080 had a typo, 1081 had a space where it shouldn’t be, 1082, found another misstep on my part, 1083, added a few more quick changes.)
-
Still the same after update to revision 1083 unfortunately. Skips the partimage process and goes to task complete. I have been trying to find which file deals with the partitioning but unsure.
Thanks
LA -
/bin/fog in the init.gz file.
