Fatal Error: Failed to Mount NFS Volume
-
you might also ensure .mntcheck is in /images/dev and /images also.
-
I need to admit, I am new in my role and the guy here at the school left before I started. When I click the question mark from the console it says this:
Version 1.2.0
Your Version of FOG is up to dateHow do I check if NFS is running? I am also not a Linux expert. How do I tell what Version of the Kernel or Colonel I am using and the .mntcheck is present. I was able to upload two other images today.
-
@michaeloberg said:
I need to admit, I am new in my role and the guy here at the school left before I started. When I click the question mark from the console it says this:
Version 1.2.0
Your Version of FOG is up to dateHow do I check if NFS is running? I am also not a Linux expert. How do I tell what Version of the Kernel or Colonel I am using and the .mntcheck is present. I was able to upload two other images today.
To give you exact steps, we need to know what Linux OS you’re running.
The distribution and version.
-
Unbuntu 12.04
Is this what you need? I ran this command to get this information:
lsb_release -irc -
[CODE]sudo service nfs-kernel-server restart
sudo service idmapd restart[/CODE]If it starts correctly, you shouldn’t get any errors. If you get errors, be sure to post those.
Also, to check if you’ve got .mntcheck where it should be:
[CODE]ls -laR /images | grep .mntcheck[/CODE]
That should give you TWO listings of .mntcheck -
Did the following, didn’t notice any errors attached is a screen shot
-
can you post the output of this? it’s your exports config file.
[CODE]cat /etc/exports[/CODE]
-
-
Would you be willing to upgrade to Trunk to see if this resolves your problem?
https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk -
I see there is 4 different versions available, how can I tell which one will be best for our environment, also being new to Linux are the commands on the Wiki the exact syntax I will type in an SSH session with the command interface?
-
@michaeloberg said:
I see there is 4 different versions available, how can I tell which one will be best for our environment, also being new to Linux are the commands on the Wiki the exact syntax I will type in an SSH session with the command interface?
I should clarify here, there is only one “Latest Trunk” version of FOG. there are many revisions, but only one “Latest”.
However, there are many methods to GET the latest trunk version.
I’d recommend using the SVN method. This might be a little more clear: https://wiki.fogproject.org/wiki/index.php/SVN#Ubuntu
-
Sorry methods, not versions. Not sure if this helps at all but when I try to do a full host registration it fails, says attempting to send to inventory…
Never does.
-
@michaeloberg said:
Sorry methods, not versions. Not sure if this helps at all but when I try to do a full host registration it fails, says attempting to send to inventory…
Never does.
Let me guess… Lenovo?
-
HP 745 EliteBook
-
-
Same problem with the last ubuntu (Fog 1.2)
Back to debian Wheezy and it works fine. (Fog 1.2)
-
We are a little worried about upgrading at this time, we have 1000 computers to reimage (our old ones and they are working) it is the 400 new ones that won’t do a full host registration, can anything think of a BIOS setting or something else I need to check in our existing environment to get this working??
-
So as mentioned earlier it won’t let us do a full host registration, when I do a quick host registration it say it did so, then see the attached picture, it just says attempting to send inventory…
-
@michaeloberg said:
So as mentioned earlier it won’t let us do a full host registration, when I do a quick host registration it say it did so, then see the attached picture, it just says attempting to send inventory…
Can you go back to System Info menu item and choose IP Information from the menu, instead of Compatibility?
-
