SVN 3192 hangs
-
Hi,
I’ve just attempted to install SVN3192. All goes well until the “Downloading new FOG Client file…” message and it just sits there.
I’ve waited about half an hour but no joy. It downloads the kernels and inits ok. I’ve checked the installation log but it just shows the same as the installation screen…stops on the client install.
I’m on Ubuntu 12.04.5 LTS OS, and was previously on SVN 21xx (I think!)
Any ideas? Should it only take seconds to download the new client file, how long do I wait?
Thanks in advance, Mark
[url=“/_imported_xf_attachments/1/1844_fogclient.jpg?:”]fogclient.jpg[/url]
-
[quote=“Tom Elliott, post: 45098, member: 7271”]@ch3i,
Are you still having this issue?[/quote]
Tom, I update from 3200 to 3222 without problem, It’s fixed for me.
Thank you
Regards,
Ch3i. -
I just tried upgrading to 3222 and am getting this client error “Failed to get client version”. Here are my logs.
[CODE] php -v
PHP 5.5.9-1ubuntu4.7 (cli) (built: Mar 16 2015 20:48:03)
Copyright
1997-2014 The PHP Group
Zend Engine v2.5.0, Copyright 1998-2014 Zend Technologies
with Zend OPcache v7.0.3, Copyright 1999-2014, by Zend Technologies
[/CODE][CODE]php -m
[PHP Modules]
bcmath
bz2
calendar
Core
ctype
curl
date
dba
dom
ereg
exif
fileinfo
filter
ftp
gd
gettext
hash
iconv
json
libxml
mbstring
mhash
mysql
mysqli
mysqlnd
openssl
pcntl
pcre
PDO
pdo_mysql
Phar
posix
readline
Reflection
session
shmop
SimpleXML
soap
sockets
SPL
standard
sysvmsg
sysvsem
sysvshm
tokenizer
wddx
xml
xmlreader
xmlwriter
Zend OPcache
zip
zlib[Zend Modules]
Zend OPcache
[/CODE] -
Are you still having this issue?
-
Hi,
Below informations of php (if it can help)
php -v
[CODE]PHP 5.4.39-0+deb7u1 (cli) (built: Mar 20 2015 15:16:28)
Copyright 1997-2014 The PHP Group
Zend Engine v2.4.0, Copyright 1998-2014 Zend Technologies
[/CODE]php -m
[CODE][PHP Modules]
bcmath
bz2
calendar
Core
ctype
curl
date
dba
dom
ereg
exif
fileinfo
filter
ftp
gd
gettext
hash
iconv
json
libxml
mbstring
mcrypt
mhash
mysql
mysqli
mysqlnd
openssl
pcntl
pcre
PDO
pdo_mysql
Phar
posix
Reflection
session
shmop
SimpleXML
soap
sockets
SPL
standard
sysvmsg
sysvsem
sysvshm
tokenizer
wddx
xml
xmlreader
xmlwriter
zip
zlib[Zend Modules]
[/CODE]Regards,
Ch3i. -
[quote=“Tom Elliott, post: 45028, member: 7271”]Maurice,
What revision is this occurring on? Have you updated to 3218 and see if this still exists?[/quote]
I was testing rev 3218, but after updating to rev 3220 a few minutes ago, the FOG Client file downloaded OK. So wow!
I’ve never see FOG development move so quickly.
Thanks!
-
Tom,
I looked here: [url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/web/client/[/url]
But FOGService.msi is not there. Where is it? -
[quote=“Mark Shelton, post: 45080, member: 423”]OK, just tried with 3221, which must have been submitted in the last hour. Still fails but I get a message now. Screenshot attached.
Regards, Mark[/quote]Mark,
I just tested a work-around because I ran into this at home…
go to here:
[CODE]/root/svn/trunk/lib/<your flavor of linux>/[/CODE]
edit this file:
[CODE]functions.sh[/CODE]towards the bottom, you’ll see stuff about “New FOG Client”
It’ll look like this, depending on your flavor of linux… but it’ll be similar…[CODE]if [ ! -f “$webredirect” ]
then
echo “<?php header(‘Location: ./fog/index.php’);?>” > $webredirect;
fi
echo “OK”;
echo -n " * Downloading New FOG Client file…";
cwd=pwd;
cd $webdirdest/service;
count=0;
while [ -z “$clientVer” -a “$count” -le 10 ]; do
clientVer=php -f ${webdirdest}/service/getclient.php;
count=expr $count '+' 1
sleep 2;
done
if [ -z “$clientVer” ]; then
echo “Failed to get client version”
exit 1
fi
[/CODE]Where you see this line:
[CODE]exit 1[/CODE]Just put a hash tag in front of it like this:
[CODE]#exit 1[/CODE]What this does is allow the script to try to download the new fog client, but if it fails, it won’t exit the installation script…
If you do this, I’d still highly recommend working with Tom fully to try to resolve the issue though.
Also, if your install fails to download the new fog client, YOU WON’T HAVE THE NEW FOG CLIENT… so don’t try to use it.However, the old client will still be available for use.
-
OK, just tried with 3221, which must have been submitted in the last hour. Still fails but I get a message now. Screenshot attached.
Regards, Mark[url=“/_imported_xf_attachments/1/1849_3221error.jpg?:”]3221error.jpg[/url]
-
[B]Tom…[/B]
foguser@HBImageserver:~$ sudo php -v
[sudo] password for foguser:
PHP 5.3.10-1ubuntu3.17 with Suhosin-Patch (cli) (built: Mar 17 2015 12:01:11)
Copyright 1997-2012 The PHP Group
Zend Engine v2.3.0, Copyright 1998-2012 Zend Technologies
foguser@HBImageserver:~$
[B]and…[/B]
foguser@HBImageserver:~$ sudo php -m
[PHP Modules]
bcmath
bz2
calendar
Core
ctype
curl
date
dba
dom
ereg
exif
fileinfo
filter
ftp
gd
gettext
hash
iconv
json
libxml
mbstring
mcrypt
mhash
mysql
mysqli
mysqlnd
openssl
pcntl
pcre
PDO
pdo_mysql
Phar
posix
readline
Reflection
session
shmop
SimpleXML
soap
sockets
SPL
standard
sysvmsg
sysvsem
sysvshm
tokenizer
wddx
xml
xmlreader
xmlwriter
zip
zlib[Zend Modules]
Regards,
Mark -
Hi Tom,
I’ve just lost connection to my FOG server at work. I’m going to have to go in and check that out. I’ll post the results. Thanks, Mark
-
Mark,
What is the output of the command:
[code]php -v[/code]and
[code]php -m[/code]
-
Hi Wayne, I downloaded and tried the latest SVN literally 25 minutes ago - SVN 3220. Unless Tom has made changes in the last 25 minutes it still does not work for me. Please advise where the “Download new FOG Client file” can be bypassed. Thanks, Mark
-
Tom fixed this for me today. Try the latest revision.
-
SVN 3220 still hangs on “Downloading new FOG CLient file”. I dont receive any messages. Nothing in the syslog file.
Ubuntu 12.04.5 LTS. If someone could let me know where the script is that attempts to download the new client file I’ll comment that out. Thanks, Mark -
Multicast worked well! I still have to do a bootrec -fixmbr and bootrec -fixboot from the Win7 recovery console, but I suspect that is due to something funky in my image. All 3 machines boot and run well!
-
Those errors are normal during a download job, it’s particular to what I’ve added to the kernel. Epolling support is now included which is why you’re seeing the errors. They’re nothing really impacting just more informative.
-
Multicast deploy is still running, but I’m getting some interesting errors. I’ve attached screenshots, but it is showing “Error opening USB device ‘descriptors’ file” now as partclone is running. [ATTACH]1847[/ATTACH][ATTACH]1848[/ATTACH] I also got a snap of the error before partclone starts: "error: /dev/sda3: No such file or directory … udevd[2755]: inotify_add_watch(6, /dev/sda3, 10) failed: No Such file or directory … and so on. [ATTACH]1846[/ATTACH] I’m going to let it run to see what happens.
[url=“/_imported_xf_attachments/1/1846_IMG_0012.JPG?:”]IMG_0012.JPG[/url][url=“/_imported_xf_attachments/1/1848_IMG_0014.JPG?:”]IMG_0014.JPG[/url][url=“/_imported_xf_attachments/1/1847_IMG_0013.JPG?:”]IMG_0013.JPG[/url]
-
svn up brought me to 3220. Everything looked good, except when prompted to go to fog/management and update the schema, I got the management console instead. I’m guessing this is because I updated the schema after the 3218 install, but not sure. Interestingly, the management console still reports that it is 3218
Multicasting seems to be working correctly now. I’m currently pushing to three machines, though they didn’t wake on lan as they have before when I created an instant deploy task, but they did fire right into the restore when powered on manually.
-
Got it. Thanks Tom!
