Fog 1.2 image upload issue
-
I can verify the disk was not setup as GPT, but I am attempting an upload of a Ubuntu “oem” install. The system consists of 2 partitions- one main ext3 partition and a small swap.
I searched around for more info on this and found a similar post here: [url]http://fogproject.org/forum/threads/cant-upload-linux-image-caixa-magica-16.503/[/url]
However this post is from FOG .33 and I can’t quite make sense of the reported solution.
Can anyone verify that they are able to capture and deploy linux images to hosts? I thought i had read that support for imaging linux was added in 1.2, but I’m having a hard time finding practical examples or guides.
Thanks Again!
-
Can you please give my thoughts a show for their money at least?
-
My apologies this took awhile, helpdesk kinda blew up for a bit.
Ok. Results of Debug Upload:
Variable dump:
Osid = 50
Osname = linux
Mbrfile =
Type = up
Storage = 192.168.1.10:/image/dev/
Img = Ubuntu
Imgformat =
Imgtype = mps
Imgformat =
Imgpartitiontype =
Hd = /dev/sda
Part = /dev/sda1Debug output:
Checking operating system - Linux
Checking cpu cores – 2
Send method – NFS
Checking in – Done
Mounting filesystem – done
Using image: Ubuntu
Preparing backup location – done
Looking for hard disks – done
Using hard disk : /dev/sda
Skipping partition tables and mbr – done
Skipping partition 1 – done
Skipping partition 2 – done
Skipping partition 5 – doneTask complete
I ran a ‘parted -l’ to verify that the disk was MBR and got “Partition Table: msdos” The man page for parted stating: [FONT=Consolas][COLOR=#222222]msdos - this is a standard MBR partition table[/COLOR][/FONT]
Thanks
-
What about gdisk -l /dev/sda
-
Results of gdisk -l /dev/sda:
Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present
Found invalid GPT and valid MBR; converting MBR to GPT format
in memory.
Disk /dev/sda: 156250000 sectors, 74.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 420B06D6-F910-4D96-A325-287306E0CE94
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 156249966
Partitions will be aligned on 2048-sector boundaries
Total free space is 5965 sectors (2.9 MiB)Number Start (sector) End (sector) Size Code Name
1 2048 148146175 70.6 GiB 8300 Linux filesystem
5 148148224 156248063 3.9 GiB 8200 Linux swap -
did you specify a “partition” to image?
-
No, I set the image as Multi-partition image (non-resizable) and ran a standard Upload task, no special arguments.
-
What’s catching my attention is:
[code]Skipping partition tables and mbr – done
Skipping partition 1 – done
Skipping partition 2 – done
Skipping partition 5 – done[/code]This leads me to think there’s a specific partition specified, or the MBR file is missing. It’s not writing the partition layout on the disk which is why you’re seeing the issue from what I can tell.
-
I tried imaging this machine with clonezilla and it worked. I’m not terribly familiar with the scripting of osc-sr, but it’s good to know that Partclone is at least capable of what i’m trying to do.
I did notice that the clonezilla restore process had to reinstall grub, so even if i get the image upload/deploy working I’ll have to figure out a way to script the grub reinstall.
If anyone can deduce anything from the clonezilla script, this was it:
[CODE]osc-sr -g auto -e1 auto -e2 -c -r -j2 -p true restoredisk imagename sda[/CODE] -
I’m telling you, it’s already setup in 1.2.0.
