WINDOWS 7 WILL NOT BOOT AFTER DEPLOY
-
Also, before re pushing the image to a system.
Can you reboot, choose boot to disk, and IMMEDIATELY after selecting, keep pressing the f8 key until you see the Windows Multi menu?
Try “Last Known Good Configuration”?
-
Awesome Tom, i am actually building a complete new installation on a different PC same hardware GIGABYTE GA-H61M-S2PV
and do as you suggest. I’ll let you know my findings
Thanks a lot to both of you for taking time and help the community. Fog is an awesome product and like i mentioned before but i had not response. My IT manager is all for donating money to the project but i need to get it working like a charm as i did for XP. We have a massive upgrade to do and on a day to day basis support .
-
Guys,
i have a new PC with the same hardware, no updates and also i disable UEFI, is using legacy. please see the pic … What should i answer ?[ATTACH=full]1149[/ATTACH][url=“/_imported_xf_attachments/1/1149_FreshInstallNoUpdatesNoUEFI.jpg?:”]FreshInstallNoUpdatesNoUEFI.jpg[/url]
-
um Break out (CTRL + C)
Run fixparts then press w
-
SUCCESS !!!
Well now i want to find out exactly what the problem is. I believe now i have different variables :-
I did disable UEFI and used Legacy Only.
-
I installed Windows 7 64 b Only, No updates, No drivers. ( Tom mentioned something about unsigned drivers )
-
I used “debug-upload” which alert me of :
Found valid MBR and GPT. Which do you want to use?
As Tom suggested i
(CTRL + C)
# fixparts /dev/sda
# y
# w
# y
# fog ( to start upload )
further testing !!!
- I am going to update windows plus drivers and try to upload. i have a feeling is going to work, just curious.
- Re install Windows 7 again with UEFI but in “debug-upload” mode to see if it complains about the partitions.
again guys very much appreciated. I will keep posting my findings hopefully it will save some time for someone !!!
[ATTACH=full]1152[/ATTACH][ATTACH=full]1153[/ATTACH][ATTACH=full]1154[/ATTACH][url=“/_imported_xf_attachments/1/1152_IMAG0081.jpg?:”]IMAG0081.jpg[/url][url=“/_imported_xf_attachments/1/1153_IMAG0082.jpg?:”]IMAG0082.jpg[/url][url=“/_imported_xf_attachments/1/1154_IMAG0083.jpg?:”]IMAG0083.jpg[/url]
-
-
Not to confuse anyone i will start a new thread as i go because they are different threads
please see [url]http://fogproject.org/forum/threads/uefi-vs-legacy-bios-gpt-vs-mbr-single-partition-resizable-vs-multiple-partition-notresizable.11124/[/url]
- Since FOG does not fully support UEFI i suggest just to disable this feature in the Bios before even installing the OS. If someone can * make it work with no issues with UEFI please share it so that i/we can understand it better.