Boot problems after upgrading from 1.0.1 to 1.1.0

zavo

Upgraded FOG from 1.0.1 to 1.1.0.

After the upgrade, we have problems with some hardware. They get a blank screen and nothing happens (an ‘_’ blinking or a BIOS message ‘Press A key to continue’).
It should be a hardware related issue, since this isn’t happening to all our devices (we have +300 PC’s).

Things I’ve tried:
[LIST]
[][url]http://www.fogproject.org/wiki/index.php/Chainloading_PXE_to_iPXE_using_pxelinux.0[/url]
[]Replacing all tftpboot files to 1.0.1
[]Upgraded FOG 1.1.0 using svn [url]http://www.fogproject.org/wiki/index.php/SVN[/url]
[]Replacing bzImage [url]http://fogproject.org/wiki/index.php/FAQ[/url]
[/LIST]
Using Ubuntu 11.04 (server)
foginstall.log:
[CODE]Script started on Thu 12 Jun 2014 01:03:01 PM CEST
…#######:. …,#,… .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

http://www.fogproject.org/

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################

Version: 1.1.0 Installer/Updater

Found FOG Settings from previous install at: /opt/fog/.fogsettings
Performing upgrade using these settings…

Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at http://www.fogproject.org/wiki

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 192.168.129.10
DHCP router Address: 192.168.129.3
DHCP DNS Address: 192.168.129.3
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

    DHCP will NOT be setup but you must setup your
    current DHCP server to use FOG for PXE services.

    On a Linux DHCP server you must set:
        next-server

    On a Windows DHCP server you must set:
        option 066 & 067

      Option 066 is the IP of the FOG Server: (e.g. 192.168.129.10
      Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) Y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-json
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.

Press enter to acknowledge this message.

Reading package lists…
Building dependency tree…
Reading state information…
The following packages will be upgraded:
mysql-server
1 upgraded, 0 newly installed, 0 to remove and 108 not upgraded.
Need to get 6,332 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 http://old-releases.ubuntu.com/ubuntu/ natty-updates/main mysql-server all 5.1.63-0ubuntu0.11.04.1 [6,332 B]
Fetched 6,332 B in 0s (79.4 kB/s)
(Reading database …
(Reading database … 5%
(Reading database … 10%
(Reading database … 15%
(Reading database … 20%
(Reading database … 25%
(Reading database … 30%
(Reading database … 35%
(Reading database … 40%
(Reading database … 45%
(Reading database … 50%
(Reading database … 55%
(Reading database … 60%
(Reading database … 65%
(Reading database … 70%
(Reading database … 75%
(Reading database … 80%
(Reading database … 85%
(Reading database … 90%
(Reading database … 95%
(Reading database … 100%
(Reading database … 55168 files and directories currently installed.)
Preparing to replace mysql-server 5.1.54-1ubuntu4 (using …/mysql-server_5.1.63-0ubuntu0.11.04.1_all.deb) …
Unpacking replacement mysql-server …
Setting up mysql-server (5.1.63-0ubuntu0.11.04.1) …

Installing package: mysql-client
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext
Installing package: clamav-freshclam

Confirming package installation.

Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-json…OK
Checking package: php5-gd…OK
Checking package: php5-cli…OK
Checking package: php5-mysql…OK
Checking package: php5-curl…OK
Checking package: mysql-server…OK
Checking package: mysql-client…OK
Checking package: tftpd-hpa…OK
Checking package: tftp-hpa…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: sysv-rc-conf…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: build-essential…OK
Checking package: cpp…OK
Checking package: gcc…OK
Checking package: g++…OK
Checking package: m4…OK
Checking package: htmldoc…OK
Checking package: lftp…OK
Checking package: openssh-server…OK
Checking package: php-gettext…OK
Checking package: clamav-freshclam…OK

Configuring services.

Setting up fog user…Exists
Setting up and starting MySql…OK
Backing up user reports…OK
Did you leave the mysql password blank during install? (Y/n) Y
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:

http://192.168.129.10/fog/management

Press [Enter] key when database is updated/installed.

Configuring Fresh Clam…OK
Setting up storage…OK
Setting up and starting NFS Server…OK
Setting up and starting DHCP Server…Skipped
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scripts…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…OK
Starting FOG Image Replicator Server…OK
Starting FOG Task Scheduler Server…OK
Setting up FOG Utils…OK

Would you like to notify the FOG group about this installation?
* This information is only used to help the FOG group determine
if FOG is being used. This information helps to let us know
if we should keep improving this product.

Send notification? (Y/N)Y
NOT sending notification.

Setup complete!

You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.

This can be done by opening a web browser and going to:

  http://192.168.129.10/fog/management

  Default User:
        Username: fog
        Password: password

Script done on Thu 12 Jun 2014 01:06:16 PM CEST
[/CODE]

Problematic hardware[code]
System ManufacturerDell Inc.
System ProductLatitude E6520
System Version01
System Serial Number8R046R1
System TypeLaptop
BIOS VendorDell Inc.
BIOS VersionA06
BIOS Date07/11/2011
Motherboard ManufacturerDell Inc.
Motherboard Product Name0NVF5K
Motherboard VersionA01
Motherboard Serial Number/8R046R1/CN129611BN058D/
Motherboard Asset TagNot Specified
CPU ManufacturerIntel
CPU VersionIntel Core i3-2330M CPU @ 2.20GH
CPU Normal Speed2200 MHz
CPU Max Speed4000 MHz
Memory0.00 KB
Hard Disk ModelSAMSUNG SSD PM810 2.5" 7mm 128GB
Hard Disk FirmwareAXM08D1Q
Hard Disk Serial NumberS0NRNEABA21731
Chassis ManufacturerDell Inc.
Chassis Version
Chassis Serial8R046R1
Chassis AssetNot Specified
[/code]

Tom Elliott

Try changing the exit type of the Boot system to Exit or Grub.

FOG Configuration->FOG Settings->FOG Boot Settings->Exit Style.

zavo

I’ve changed the FOG_BOOT_EXIT_TYPE to GRUB and the problem was solved!
Thank you very much for the support.