Boot problems after upgrading from 1.0.1 to 1.1.0



  • Upgraded FOG from 1.0.1 to 1.1.0.

    After the upgrade, we have problems with some hardware. They get a blank screen and nothing happens (an ‘_’ blinking or a BIOS message ‘Press A key to continue’).
    It should be a hardware related issue, since this isn’t happening to all our devices (we have +300 PC’s).

    Things I’ve tried:
    [LIST]
    [][url]http://www.fogproject.org/wiki/index.php/Chainloading_PXE_to_iPXE_using_pxelinux.0[/url]
    [
    ]Replacing all tftpboot files to 1.0.1
    []Upgraded FOG 1.1.0 using svn [url]http://www.fogproject.org/wiki/index.php/SVN[/url]
    [
    ]Replacing bzImage [url]http://fogproject.org/wiki/index.php/FAQ[/url]
    [/LIST]
    Using Ubuntu 11.04 (server)
    foginstall.log:
    [CODE]Script started on Thu 12 Jun 2014 01:03:01 PM CEST
    …#######:. …,#,… .::##::.
    .:###### .:;####:…;#;…
    …##… …##;,;##::::.##…
    ,# …##…##:::## …::
    ## .::###,##. . ##.::#.:######::.
    …##:::###::…#. … .#…#. #…#:::.
    …:####:… …##…##::## … #
    # . …##:,;##;:::#: … ##…
    .# . .:;####;::::.##:::;#:…
    # …:;###…

    ###########################################

    FOG

    Free Computer Imaging Solution

    http://www.fogproject.org/

    Developers:

    Chuck Syperski

    Jian Zhang

    Peter Gilchrist

    Tom Elliott

    GNU GPL Version 3

    ###########################################

    Version: 1.1.0 Installer/Updater

    • Found FOG Settings from previous install at: /opt/fog/.fogsettings
    • Performing upgrade using these settings…

    Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

    #####################################################################

    FOG now has everything it needs to setup your server, but please
    understand that this script will overwrite any setting you may
    have setup for services like DHCP, apache, pxe, tftp, and NFS.

    It is not recommended that you install this on a production system
    as this script modifies many of your system settings.

    This script should be run by the root user on Redhat or with sudo on Ubuntu.

    ** Notice ** Redhat users will need to disable SELinux and iptables in
    order to use FOG
    Please see our wiki for more information at http://www.fogproject.org/wiki

    Here are the settings FOG will use:
    Base Linux: Debian
    Detected Linux Distribution: Ubuntu
    Installation Type: Normal Server
    Server IP Address: 192.168.129.10
    DHCP router Address: 192.168.129.3
    DHCP DNS Address: 192.168.129.3
    Interface: eth0
    Using FOG DHCP: 0
    Internationalization: 0
    Donate: 0

        DHCP will NOT be setup but you must setup your
        current DHCP server to use FOG for PXE services.
    
        On a Linux DHCP server you must set:
            next-server
    
        On a Windows DHCP server you must set:
            option 066 & 067
    
          Option 066 is the IP of the FOG Server: (e.g. 192.168.129.10
          Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)
    

    Are you sure you wish to continue (Y/N) Y

    Installation Started…

    Installing required packages, if this fails
    make sure you have an active internet connection.

    • Preparing apt-get

    • Installing package: apache2

    • Installing package: php5

    • Installing package: php5-json

    • Installing package: php5-gd

    • Installing package: php5-cli

    • Installing package: php5-mysql

    • Installing package: php5-curl

    • Installing package: mysql-server

      We are about to install MySQL Server on
      this server, if MySQL isn’t installed already
      you will be prompted for a root password.

      Press enter to acknowledge this message.

    Reading package lists…
    Building dependency tree…
    Reading state information…
    The following packages will be upgraded:
    mysql-server
    1 upgraded, 0 newly installed, 0 to remove and 108 not upgraded.
    Need to get 6,332 B of archives.
    After this operation, 0 B of additional disk space will be used.
    Get:1 http://old-releases.ubuntu.com/ubuntu/ natty-updates/main mysql-server all 5.1.63-0ubuntu0.11.04.1 [6,332 B]
    Fetched 6,332 B in 0s (79.4 kB/s)
    (Reading database …
    (Reading database … 5%
    (Reading database … 10%
    (Reading database … 15%
    (Reading database … 20%
    (Reading database … 25%
    (Reading database … 30%
    (Reading database … 35%
    (Reading database … 40%
    (Reading database … 45%
    (Reading database … 50%
    (Reading database … 55%
    (Reading database … 60%
    (Reading database … 65%
    (Reading database … 70%
    (Reading database … 75%
    (Reading database … 80%
    (Reading database … 85%
    (Reading database … 90%
    (Reading database … 95%
    (Reading database … 100%
    (Reading database … 55168 files and directories currently installed.)
    Preparing to replace mysql-server 5.1.54-1ubuntu4 (using …/mysql-server_5.1.63-0ubuntu0.11.04.1_all.deb) …
    Unpacking replacement mysql-server …
    Setting up mysql-server (5.1.63-0ubuntu0.11.04.1) …

    • Installing package: mysql-client
    • Installing package: tftpd-hpa
    • Installing package: tftp-hpa
    • Installing package: nfs-kernel-server
    • Installing package: vsftpd
    • Installing package: net-tools
    • Installing package: wget
    • Installing package: xinetd
    • Installing package: sysv-rc-conf
    • Installing package: tar
    • Installing package: gzip
    • Installing package: build-essential
    • Installing package: cpp
    • Installing package: gcc
    • Installing package: g++
    • Installing package: m4
    • Installing package: htmldoc
    • Installing package: lftp
    • Installing package: openssh-server
    • Installing package: php-gettext
    • Installing package: clamav-freshclam

    Confirming package installation.

    • Checking package: apache2…OK
    • Checking package: php5…OK
    • Checking package: php5-json…OK
    • Checking package: php5-gd…OK
    • Checking package: php5-cli…OK
    • Checking package: php5-mysql…OK
    • Checking package: php5-curl…OK
    • Checking package: mysql-server…OK
    • Checking package: mysql-client…OK
    • Checking package: tftpd-hpa…OK
    • Checking package: tftp-hpa…OK
    • Checking package: nfs-kernel-server…OK
    • Checking package: vsftpd…OK
    • Checking package: net-tools…OK
    • Checking package: wget…OK
    • Checking package: xinetd…OK
    • Checking package: sysv-rc-conf…OK
    • Checking package: tar…OK
    • Checking package: gzip…OK
    • Checking package: build-essential…OK
    • Checking package: cpp…OK
    • Checking package: gcc…OK
    • Checking package: g++…OK
    • Checking package: m4…OK
    • Checking package: htmldoc…OK
    • Checking package: lftp…OK
    • Checking package: openssh-server…OK
    • Checking package: php-gettext…OK
    • Checking package: clamav-freshclam…OK

    Configuring services.

    • Setting up fog user…Exists

    • Setting up and starting MySql…OK

    • Backing up user reports…OK

    • Did you leave the mysql password blank during install? (Y/n) Y 

    • Setting up and starting Apache Web Server…OK
      You still need to install/update your database schema.
      This can be done by opening a web browser and going to:

      http://192.168.129.10/fog/management

    Press [Enter] key when database is updated/installed.

    • Configuring Fresh Clam…OK
    • Setting up storage…OK
    • Setting up and starting NFS Server…OK
    • Setting up and starting DHCP Server…Skipped
    • Setting up and starting TFTP and PXE Servers…OK
    • Setting up and starting VSFTP Server…OK
    • Setting up sudo settings…OK
    • Setting up FOG Snapins…OK
    • Setting up and building UDPCast…OK
    • Installing init scripts…OK
    • Setting up FOG Services…OK
    • Starting FOG Multicast Management Server…OK
    • Starting FOG Image Replicator Server…OK
    • Starting FOG Task Scheduler Server…OK
    • Setting up FOG Utils…OK

    Would you like to notify the FOG group about this installation?
    * This information is only used to help the FOG group determine
    if FOG is being used. This information helps to let us know
    if we should keep improving this product.

    Send notification? (Y/N)Y
    NOT sending notification.

    Setup complete!

    You can now login to the FOG Management Portal using
    the information listed below. The login information
    is only if this is the first install.

    This can be done by opening a web browser and going to:

      http://192.168.129.10/fog/management
    
      Default User:
            Username: fog
            Password: password
    

    Script done on Thu 12 Jun 2014 01:06:16 PM CEST
    [/CODE]

    Problematic hardware[code]
    System ManufacturerDell Inc.
    System ProductLatitude E6520
    System Version01
    System Serial Number8R046R1
    System TypeLaptop
    BIOS VendorDell Inc.
    BIOS VersionA06
    BIOS Date07/11/2011
    Motherboard ManufacturerDell Inc.
    Motherboard Product Name0NVF5K
    Motherboard VersionA01
    Motherboard Serial Number/8R046R1/CN129611BN058D/
    Motherboard Asset TagNot Specified
    CPU ManufacturerIntel
    CPU VersionIntel® Core™ i3-2330M CPU @ 2.20GH
    CPU Normal Speed2200 MHz
    CPU Max Speed4000 MHz
    Memory0.00 KB
    Hard Disk ModelSAMSUNG SSD PM810 2.5" 7mm 128GB
    Hard Disk FirmwareAXM08D1Q
    Hard Disk Serial NumberS0NRNEABA21731
    Chassis ManufacturerDell Inc.
    Chassis Version
    Chassis Serial8R046R1
    Chassis AssetNot Specified
    [/code]



  • I’ve changed the FOG_BOOT_EXIT_TYPE to GRUB and the problem was solved!
    Thank you very much for the support.


  • Senior Developer

    Try changing the exit type of the Boot system to Exit or Grub.

    FOG Configuration->FOG Settings->FOG Boot Settings->Exit Style.


Log in to reply
 

399
Online

38953
Users

10706
Topics

101570
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.