Fog 1.1.0 multicast sits at "Starting to restore image (-) to device (/dev/sda1)

Sage

[B][COLOR=#ff0000]EDIT: Sorted! The new SVN helped - it works now like a charm! Thank you![/COLOR][/B]

Good afternoon fellow Foggers!
I have the same problem as stated before - multicast just refuses to work and hangs on the window.

Unicast works just fine, but multicast just refuses to work.

Server: Debian 7.6
Fog: 1.1.2 latest version.

Here is what I get out of my udp-log file.

[CODE]Udp-sender 20120424
Using mcast address 234.10.48.7
UDP sender for (stdin) at 10.10.48.7 on eth0
Broadcasting control to 224.0.0.1
New connection from 10.10.50.70 (#0) 00000009
New connection from 10.10.50.71 (#1) 00000009
New connection from 10.10.50.72 (#2) 00000009
New connection from 10.10.50.73 (#3) 00000009
New connection from 10.10.50.74 (#4) 00000009
New connection from 10.10.50.75 (#5) 00000009
New connection from 10.10.50.77 (#6) 00000009
New connection from 10.10.50.121 (#7) 00000009
New connection from 10.10.50.76 (#8) 00000009
Starting transfer: 00000009
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Timeout notAnswered=[0,1,2,3,4,5,6,7,8] notReady=[0,1,2,3,4,5,6,7,8] nrAns=0 nrRead=0 nrPart=9 avg=10000
Dropping client #0 because of timeout
Disconnecting #0 (10.10.50.70)
Dropping client #1 because of timeout
Disconnecting #1 (10.10.50.71)
Dropping client #2 because of timeout
Disconnecting #2 (10.10.50.72)
Dropping client #3 because of timeout
Disconnecting #3 (10.10.50.73)
Dropping client #4 because of timeout
Disconnecting #4 (10.10.50.74)
Dropping client #5 because of timeout
Disconnecting #5 (10.10.50.75)
Dropping client #6 because of timeout
Disconnecting #6 (10.10.50.77)
Dropping client #7 because of timeout
Disconnecting #7 (10.10.50.121)
Dropping client #8 because of timeout
Disconnecting #8 (10.10.50.76)
bytes= re-xmits=0000000 ( 0.0%) slice=0112 - 0
Transfer complete.[/CODE]

Here are two images from my router. When I launch multicast - the fog control management says that they are in q[SIZE=3][FONT=arial][COLOR=#545454][B]ueue[/B][/COLOR][/FONT][/SIZE] - once I start the clients, the management shows that it’s in “progress”. Here’s what the routers say about it:
Seems like both, the server & the clients are sending signals to each other.

Server is on 10.10.48.7 ip address and the clients are on the 10.10.50. subnet

[IMG]http://www.pixentral.com/pics/1y1KRscWeCz5zGoDid0W0VX8YihKLk.png[/IMG]

[IMG]http://www.pixentral.com/pics/19BdkPufSWuXOIvkk7IHRFuAUJHHPg0.png[/IMG]

Is there any possible solution for this?

TRSD

We are having the same problem on v.1.1.2. We tried omping and that works.

gwhitfield

Pardon if this thread is going out of date but I thought I’d chime in a bit since I’ve been struggling with this on a new install of FOG 1.2.0 on Ubuntu 12.04 and I “think” I’ve got my issue sorted a bit, at least enough that I had success multicasting this morning when it wasn’t working Friday afternoon. Note I’ve also had to figure out the tftpd-hpa restart thing which I don’t get at all. I’m an Ubuntu/Linux noob but I’ve got several FOG 0.29 boxes at different schools on Ubuntu 10.04 that have been running without problems out-of-the-box (so to speak) for YEARS so it’s unfortunate to see this kind of issue in an updated OS but it is what it is. Anyway, my clients were multicasting fine Friday morning on my new install until I shut it down to move it out of the lab and into our server room and a new switch too. All of a sudden I can’t multicast anymore but tasks have been going through this switch just fine all day so that ain’t it. Tons of Googling and forums research later and I get to this thread and a couple other like it so I vpn in from home (when I shouldn’t be working) and …

… from CLI I tried to restart the FOGMulticastManager and got this:

[EMAIL]administrator@GCC-FOGSERVER:~$[/EMAIL] sudo /etc/init.d/FOGMulticastManager restart

Restarting FOG Computer Imaging Solution: FOGMulticastManager
start-stop-daemon: warning: failed to kill 1069: No such process [ OK ]

… so thinking “AHA!! The service wasn’t even running” I tried several times to start the service and got this:

[EMAIL]administrator@GCC-FOGSERVER:~$[/EMAIL] sudo /etc/init.d/FOGMulticastManager start

Starting FOG Computer Imaging Solution: FOGMulticastManager [fail]

… after thinking on it a bit I try to stop and start as individual steps:

[EMAIL]administrator@GCC-FOGSERVER:~$[/EMAIL] sudo /etc/init.d/FOGMulticastManager stop

Stopping FOG Computer Imaging Solution: FOGMulticastManager [ OK ]
[EMAIL]administrator@GCC-FOGSERVER:~$[/EMAIL] sudo /etc/init.d/FOGMulticastManager start
Starting FOG Computer Imaging Solution: FOGMulticastManager [ OK ]

… Oooooooh, that looks good so I try another restart to see what happens:

[EMAIL]administrator@GCC-FOGSERVER:~$[/EMAIL] sudo /etc/init.d/FOGMulticastManager restart

Restarting FOG Computer Imaging Solution: FOGMulticastManager [ OK ]

I was then able to successfully initiate a multicast task and the machines thankfully all woke up and did their thing!! BTW - I LOVE when I can see the progress of a multicast task in 1.2.0 which is the only way I could tell if anything worked since I was at home. It’s my favorite.

Something is goofy on a reboot where (in addition to tftpd-hpa issue) the FOGMulticastManager process can’t be started or restarted because “no such process”. I hope this may help someone who has the problem.

Tom Elliott

There’s a problem, similar to the tftpd-hpa issue, with mysql. I believe this is what you’re encountering.

It’s trying to start mysql, tftpd-hpa, and the FOG Services before the network device is available to run. What ends up happening is the processes (FOGMulticastManager,FOGImageReplicator,FOGScheduler) are running, but can’t communicate. So a restart doesn’t work because the restart simply kills and starts a new process. The previous process can’t stop so it just starts another process using the original process generated as if it were a child process. Because that doesn’t exist, and horrible looping pattern can be seen. I don’t know what to do to fix it. The proper fix for it is to run:
[code]sudo service FOGMulticastManager stop
sudo service FOGImageReplicator stop
sudo service FOGScheduler stop
sudo service FOGMulticastManager start
sudo service FOGImageReplicator start
sudo service FOGScheduler start[/code]

gwhitfield

Thanks, Tom, I hadn’t come across the MySQL thing but I’ll make sure we’re doing the start-stop thing right from here on out.

Mentaloid

[quote=“Tom Elliott, post: 34771, member: 7271”]There’s a problem, similar to the tftpd-hpa issue, with mysql. I believe this is what you’re encountering.

It’s trying to start mysql, tftpd-hpa, and the FOG Services before the network device is available to run. What ends up happening is the processes (FOGMulticastManager,FOGImageReplicator,FOGScheduler) are running, but can’t communicate. So a restart doesn’t work because the restart simply kills and starts a new process. The previous process can’t stop so it just starts another process using the original process generated as if it were a child process. Because that doesn’t exist, and horrible looping pattern can be seen. I don’t know what to do to fix it. The proper fix for it is to run:
[code]sudo service FOGMulticastManager stop
sudo service FOGMulticastManager stop
sudo service FOGScheduler stop
sudo service FOGMulticastManager start
sudo service FOGImageReplicator start
sudo service FOGScheduler start[/code][/quote]

So, after taking a 5 minute look at this, there’s a quick fix, albeit an semi-incorrect fix.
Things to note here:
A) I use Debian.
B) The fog Ubuntu/Debian installer uses sys-rc-conf to register the initscripts which on a Debian system, while it works, is wrong.

The solution I came up with to make this work in a hurry:
A) Edit /etc/init.d/FOG* and change line #4 from [code]# Required-Start: $local_fs $remote_fs $network $syslog $network $inetd[/code] to [code]# Required-Start: $local_fs $remote_fs $network $syslog $network $inetd $all[/code]. Adding the $all keyword here is frowned upon, however I’m looking for a quick fix, not a correct fix… Possibly I will revert this at some point after changing the services themselves to start gracefully and wait for a network to be available, rather than bombing out. (If I do this, I’ll submit a patch)

B) update-rc.d (or insserv) is the correct way to register init scripts for Debian. I ran
[code]
insserv -d /etc/init.d/FOGMulticastManager
insserv -d /etc/init.d/FOGScheduler
insserv -d /etc/init.d/FOGImageReplicator
[/code] to reset the registration of the initscripts to the correct dependencies/runlevels as requested in the LSB headers of the initscripts.

After a reboot, all services were running, and I could get multicast running correctly.

Mentaloid

So I’ve been playing around more with this.
I’m using a fresh install of FOG 1.2.0 on Debian 7.6

First off, the init scripts don’t seem to be added to the startup correctly.
Fixed this via
[code]
insserv -d /etc/init.d/FOGMulticastManager
insserv -d /etc/init.d/FOGScheduler
insserv -d /etc/init.d/FOGImageReplicator
[/code]

Second, going by the old idea that the network wasn’t ready yet, I wrote a routine to wait for the network interface
/var/www/fog/commons/nettest.php
[code]
<?php
function clear_screen($outputdevice) { $GLOBALS[‘FOGCore’]->out(chr(27).“[2J”.chr(27).“[;H”,$outputdevice); }
function wait_interface_ready($interface,$outputdevice) {
while (true) {
$retarr = array();
exec(‘netstat -inN’,$retarr);
array_shift($retarr);array_shift($retarr);
foreach($retarr as $line) {
$t = substr($line,0,strpos($line,’ '));
if ($t === $interface) {
$GLOBALS[‘FOGCore’]->out(“Interface now ready…”,$outputdevice);
break 2;
}
}
$GLOBALS[‘FOGCore’]->out(“Interface not ready, waiting…”,$outputdevice);
sleep(10);
}
}
?>
[/code]
Second I added this to /opt/fog/service/FOG*/FOG* similar to below (with appropriate differences for the different files)
[code]
<?php
@error_reporting(0);
require_once( dirname(realpath(FILE)) . “/…/etc/config.php” );
require_once( WEBROOT . “/commons/base.inc.php” );

new code here

require_once( WEBROOT . “/commons/nettest.php” );
clear_screen(MULTICASTDEVICEOUTPUT);
$FOGCore->out($FOGCore->getBanner(), MULTICASTDEVICEOUTPUT);
wait_interface_ready($FOGCore->getSetting(‘FOG_UDPCAST_INTERFACE’),MULTICASTDEVICEOUTPUT);

    $MM = new MulticastManager();
    if( ! file_exists( UDPSENDERPATH ) )
    {
            $MM->outall(sprintf(" * Unable to locate udp-sender!."));
            exit;
    }
    $MM->serviceStart();
    $MM->serviceRun();
    $MM->outall(sprintf(" * Service has ended."));

?>
[/code]
At this point I tested with the network interfaces being up/down when service is started, and it tests ok… the various /opt/fog/service/FOG*/FOG* scripts will wait until a network device is available before continuing.
Now I rebooted, expecting the issue to be solved… but nope. While more robust, it’s still failing to start with a boot.
After fooling around awhile, I figured out that it’s because the FOG* scripts are being called before mysql is started in the boot sequence. These scripts fail hard without a SQL connection. I’m not sure how to fix that, but I’m not sure that it’s a needed fix at this point.
With the above routine still in place, I also modified the LSB headers in /etc/init.d/FOG*, removing the default run levels so the system can maintain them properly on it’s own, and adding mysql to the required start line (Yes, the lack of $ is important, as it’s a service provided by another init script, not a system service)
[code]

BEGIN INIT INFO

Provides: FOGMulticastManager

Required-Start: $local_fs $remote_fs $network $syslog $network $inetd mysql

Required-Stop: $local_fs $remote_fs $network $syslog $network $inetd

Default-Start:

Default-Stop:

X-Interactive: true

Short-Description: Start/Stop FOGMulticastManager

Long-Description: Created by Chuck Syperski

Used to stop and start the FOGMulticastManager Service.

FOGMulticastManager is used to destribute images through

Multicast. Useful to image large amounts of systems simultaneously.

It serves this ability only if it’s the master node.

END INIT INFO

[/code]
Ran insserv again to update the bootscripts…
[code]
insserv -d /etc/init.d/FOGMulticastManager
insserv -d /etc/init.d/FOGScheduler
insserv -d /etc/init.d/FOGImageReplicator
[/code]

And now after a reboot, all the services are starting correctly.

Tom Elliott

[quote=“Mentaloid, post: 35670, member: 4362”]So I’ve been playing around more with this.
I’m using a fresh install of FOG 1.2.0 on Debian 7.6

First off, the init scripts don’t seem to be added to the startup correctly.
Fixed this via
[code]
insserv -d /etc/init.d/FOGMulticastManager
insserv -d /etc/init.d/FOGScheduler
insserv -d /etc/init.d/FOGImageReplicator
[/code]

Second, going by the old idea that the network wasn’t ready yet, I wrote a routine to wait for the network interface
/var/www/fog/commons/nettest.php
[code]
<?php
function clear_screen($outputdevice) { $GLOBALS[‘FOGCore’]->out(chr(27).“[2J”.chr(27).“[;H”,$outputdevice); }
function wait_interface_ready($interface,$outputdevice) {
while (true) {
$retarr = array();
exec(‘netstat -inN’,$retarr);
array_shift($retarr);array_shift($retarr);
foreach($retarr as $line) {
$t = substr($line,0,strpos($line,’ '));
if ($t === $interface) {
$GLOBALS[‘FOGCore’]->out(“Interface now ready…”,$outputdevice);
break 2;
}
}
$GLOBALS[‘FOGCore’]->out(“Interface not ready, waiting…”,$outputdevice);
sleep(10);
}
}
?>
[/code]
Second I added this to /opt/fog/service/FOG*/FOG* similar to below (with appropriate differences for the different files)
[code]
<?php
@error_reporting(0);
require_once( dirname(realpath(FILE)) . “/…/etc/config.php” );
require_once( WEBROOT . “/commons/base.inc.php” );

new code here

require_once( WEBROOT . “/commons/nettest.php” );
clear_screen(MULTICASTDEVICEOUTPUT);
$FOGCore->out($FOGCore->getBanner(), MULTICASTDEVICEOUTPUT);
wait_interface_ready($FOGCore->getSetting(‘FOG_UDPCAST_INTERFACE’),MULTICASTDEVICEOUTPUT);

    $MM = new MulticastManager();
    if( ! file_exists( UDPSENDERPATH ) )
    {
            $MM->outall(sprintf(" * Unable to locate udp-sender!."));
            exit;
    }
    $MM->serviceStart();
    $MM->serviceRun();
    $MM->outall(sprintf(" * Service has ended."));

?>
[/code]
At this point I tested with the network interfaces being up/down when service is started, and it tests ok… the various /opt/fog/service/FOG*/FOG* scripts will wait until a network device is available before continuing.
Now I rebooted, expecting the issue to be solved… but nope. While more robust, it’s still failing to start with a boot.
After fooling around awhile, I figured out that it’s because the FOG* scripts are being called before mysql is started in the boot sequence. These scripts fail hard without a SQL connection. I’m not sure how to fix that, but I’m not sure that it’s a needed fix at this point.
With the above routine still in place, I also modified the LSB headers in /etc/init.d/FOG*, removing the default run levels so the system can maintain them properly on it’s own, and adding mysql to the required start line (Yes, the lack of $ is important, as it’s a service provided by another init script, not a system service)
[code]

BEGIN INIT INFO

Provides: FOGMulticastManager

Required-Start: $local_fs $remote_fs $network $syslog $network $inetd mysql

Required-Stop: $local_fs $remote_fs $network $syslog $network $inetd

Default-Start:

Default-Stop:

X-Interactive: true

Short-Description: Start/Stop FOGMulticastManager

Long-Description: Created by Chuck Syperski

Used to stop and start the FOGMulticastManager Service.

FOGMulticastManager is used to destribute images through

Multicast. Useful to image large amounts of systems simultaneously.

It serves this ability only if it’s the master node.

END INIT INFO

[/code]
Ran insserv again to update the bootscripts…
[code]
insserv -d /etc/init.d/FOGMulticastManager
insserv -d /etc/init.d/FOGScheduler
insserv -d /etc/init.d/FOGImageReplicator
[/code]

And now after a reboot, all the services are starting correctly.[/quote]

Mentaloid,

I’ve added much of the scripts you did (less the nettest.php as I added it directly into FOGCore class.) Also all the edits. Hopefully this will help us all out. Thank you for taking the time to test/troubleshoot and post your findings.

Mentaloid

[quote=“Tom Elliott, post: 35689, member: 7271”]Mentaloid,

I’ve added much of the scripts you did (less the nettest.php as I added it directly into FOGCore class.) Also all the edits. Hopefully this will help us all out. Thank you for taking the time to test/troubleshoot and post your findings.[/quote]

No worries at at all Tom, the least I can do to help the project!
I had figured you would add it directly to the FOGCore class

I tested this against Ubuntu as well. Unfortunately, Ubuntu/upstart ignores LSB headers in the init scripts (bah… Ubuntu re-invents the wheel, and cripples it in the process again). Another solution will have to be found for this mysql issue for more compatibility.
2 options exist…
A) write a routine that checks for mysql to be alive, similar to wait_interface_ready.
B) Create an upstart style initscript, and install that instead of insserv/lsb initscript when installing on upstart OS’s

I like option A better, as it wouldn’t require separating the installer into ubuntu/upstart and debian/inserv again (yuck). I’ll look into how/where you implemented wait_interface_ready in the FOGCore class, and see if I can create a similar routine for mysql this weekend (or soon thereafter). The problem I can see with this is that FOGCore itself is what bombs without mysql. I’ll toy and see whats possible.

I also noticed a device output mistake in /var/www/fog/lib/fog/MulticastManager.class.php on line 227. This should be MULTICASTDEVICEOUTPUT. In SVN, it is using REPLICATORDEVICEOUTPUT.

Tom Elliott

Thanks for reporting and I’ll fix it right now.

Mentaloid

Toying around complete… Conclusions:
A) once base.inc.php is included, the full FOGCore/FOGBase is initialized. There doesn’t look to be any way I can see with the current structure to have the classes wait for the database when used as a daemon. Once called, an exception and exit is desired for normal circumstances (called via the CGI/Apache SAPI) if the database isn’t available. If we create an exemption for daemons (CLI SAPI) during DB class construction, then we are stuck with having to determine which service is currently executing and output to the correct output device the daemon for messages and waiting. I don’t see this as desirable operation inside the base DB classes as this isn’t the job of the DB class, or for that matter FOGCore/Base.

B) have a class specific to daemons that handles wait_interface_ready and wait_db_ready routines. Feasibly, the only use for these routines would be for the daemons anyways.

I’ve gone ahead and have done option B.

Attached are the patched /opt/fog/service/FOG*/FOG* files, as well as a Daemon.class.php (/var/www/fog/lib/fog/Daemon.class.php).
$Daemon->wait_db_ready() and $Daemon->wait_interface_ready() are both implemented. wait_interface_ready() has some fixes to make it a little more compatible with servers that are using Network-Manager/Network-Manager-Gnome.

Tested against Debian 7.6 and Ubuntu 14.04, with and without NM purged.

[url=“/_imported_xf_attachments/1/1313_FOGServices.zip?:”]FOGServices.zip[/url]

Tom Elliott

I’ve added the Daemon class and the edited FOG Service files. I appreciate the assist.

phm2000

Hi

I have the same problem with fog 1.2 and ubuntu 10.04.
It stays at : Starting to restore image (-) to device (/dev/sda1) on my 8 computers
Any idea

Thanks

Mentaloid

1.2.0 stock has the known issue above… if you don’t wish to use the SVN tree, then the above scripts in my previous post could be applied manually.

MarcoN

I have the same setup as phm2000 and same issue. I tried the SVN tree following this instructions [url]http://www.fogproject.org/wiki/index.php/SVN[/url]

Unfortunattely the issue is still there.

phm2000

Hi Mentaloid

I tried your files but same issue.
I tried svn, same issue.
The multicast task dissapear from list after 1 minute but individual tasks stays on active task list.

Tom Elliott

[quote=“phm2000, post: 36243, member: 24664”]Hi Mentaloid

I tried your files but same issue.
I tried svn, same issue.
The multicast task dissapear from list after 1 minute but individual tasks stays on active task list.[/quote]

Have you tried making sure FOGMulticastManager service is actually running properly?

[code]sudo service FOGMulticastManager stop && sleep 30 && sudo service FOGMulticastManager start[/code]

kimbo

Hi,

i made a complete fresh installation with Ubuntu Server 12.04.5 (and also Debian 7.5) and the lastest FOG SVN 2270 (yesterday) with in a NAT VM. I can´t do a multicast deploy of an image. I created a group and assigned one single client (NAT VM too) to this group. its not working (multicast deploy with a group to a single client also not working) . It´s starts up until it cames to the partclone screen. After this it hangs and nothing happens. With Unicast everything works fine and i can create and deploy an image.

In the LOG-Viewer i found serveral entrys about

[CODE][09-10-14 7:18:25 am] | Task (1) mcgroup-with-one-client is already running PID 3999
[09-10-14 7:18:35 am] | Task (1) mcgroup-with-one-client is already running PID 3999
[09-10-14 7:18:45 am] | Task (1) mcgroup-with-one-client is already [/CODE]

I´m also noticed that the time is incorrect. I tried to correct it with the hints i found in the forum but it shows still the wrong time. I´am also tried to apply the patches i found here in the thread but it looks like they are already there.

With the new SVN i found the Option Multicast-Image under “Image-Management”. When i create with this an multicast session, start the clients over pxe and select “Join Multicast Session” the multicast restore working. This is really confusing that it is working this way but not the way through the group management.

Here the install Log:

[CODE]Script started on Di 09 Sep 2014 13:58:57 CEST
Debian

  ..#######:.    ..,#,..    .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

http://www.fogproject.org/

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################

Version: 1.3.0 Installer/Updater

Found FOG Settings from previous install at: /opt/fog/.fogsettings
Performing upgrade using these settings…

Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at http://www.fogproject.org/wiki

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Debian
Installation Type: Normal Server
Server IP Address: 192.168.83.134
DHCP router Address: 192.168.83.2
DHCP DNS Address: 192.168.83.2
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0
Image Storage Location: /images
Donate: 0

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-json
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.

Press enter to acknowledge this message.

Paketlisten werden gelesen…
AbhÃ¤ngigkeitsbaum wird aufgebaut…
Statusinformationen werden eingelesen…
mysql-server ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

Installing package: mysql-client
Installing package: isc-dhcp-server
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext

Confirming package installation.

Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-json…OK
Checking package: php5-gd…OK
Checking package: php5-cli…OK
Checking package: php5-mysql…OK
Checking package: php5-curl…OK
Checking package: mysql-server…OK
Checking package: mysql-client…OK
Checking package: isc-dhcp-server…OK
Checking package: tftpd-hpa…OK
Checking package: tftp-hpa…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: sysv-rc-conf…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: build-essential…OK
Checking package: cpp…OK
Checking package: gcc…OK
Checking package: g++…OK
Checking package: m4…OK
Checking package: htmldoc…OK
Checking package: lftp…OK
Checking package: openssh-server…OK
Checking package: php-gettext…OK

Configuring services.

Setting up and starting MySql…OK
Backing up user reports…OK
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:

http://192.168.83.134/fog/management

Press [Enter] key when database is updated/installed.

Configuring Fresh Clam…OK
Setting up storage…OK
Setting up and starting NFS Server…OK
Setting up and starting DHCP Server…OK
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scripts…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…OK
Starting FOG Image Replicator Server…OK
Starting FOG Task Scheduler Server…OK
Setting up FOG Utils…OK

Setup complete!

You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.

This can be done by opening a web browser and going to:

  http://192.168.83.134/fog/management

  Default User:
        Username: fog
        Password: password

Script done on Di 09 Sep 2014 13:59:59 CEST
[/CODE]

I hope you can help me

Tom Elliott

I’m aware of a problem with multicast starting and the only work around I have found is to truncate your multicastSessions and multicastSessionsAssoc tables. On the fog server, kill all the current udp-sender processes.

[code]mysql -u root [ -p’PASSWORDHERE’ #only if you have a mysql password] fog
truncate table multicastSessions;
truncate table multicastSessionsAssoc;
delete * from tasks WHERE taskTypeID=‘8’;
exit;
sudo killall udp-sender; sudo killall udp-sender; sudo killall udp-sender
sudo service FOGMulticastManager restart;[/code]

Then recreate your multicast task (not the one to “join” session). All should work.

kimbo

No sorry i had no luck. multicast still not working. unicast for create/deploy an image are working. he still hangs at the same point at the partclone screen. I also tried debug mode - everything looks fine, no errors on screen until this point.

Fog 1.1.0 multicast sits at "Starting to restore image (-) to device (/dev/sda1)

… from CLI I tried to restart the FOGMulticastManager and got this:

… so thinking “AHA!! The service wasn’t even running” I tried several times to start the service and got this:

… after thinking on it a bit I try to stop and start as individual steps:

… Oooooooh, that looks good so I try another restart to see what happens:

new code here

BEGIN INIT INFO

Provides: FOGMulticastManager

Required-Start: $local_fs $remote_fs $network $syslog $network $inetd mysql

Required-Stop: $local_fs $remote_fs $network $syslog $network $inetd

Default-Start:

Default-Stop:

X-Interactive: true

Short-Description: Start/Stop FOGMulticastManager

Long-Description: Created by Chuck Syperski

Used to stop and start the FOGMulticastManager Service.

FOGMulticastManager is used to destribute images through

Multicast. Useful to image large amounts of systems simultaneously.

It serves this ability only if it’s the master node.

END INIT INFO

new code here

BEGIN INIT INFO

Provides: FOGMulticastManager

Required-Start: $local_fs $remote_fs $network $syslog $network $inetd mysql

Required-Stop: $local_fs $remote_fs $network $syslog $network $inetd

Default-Start:

Default-Stop:

X-Interactive: true

Short-Description: Start/Stop FOGMulticastManager

Long-Description: Created by Chuck Syperski

Used to stop and start the FOGMulticastManager Service.

FOGMulticastManager is used to destribute images through

Multicast. Useful to image large amounts of systems simultaneously.

It serves this ability only if it’s the master node.

END INIT INFO

FOG

Free Computer Imaging Solution

http://www.fogproject.org/

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

219

11.6k

17.1k

154.6k