After upgrade from Fog 0.32 to 1.1.0...



  • Hello,

    I was able to upgrade my FOG installation from version 0.32 to 1.1.0.

    Before this the 0.32 install worked really well. However after the upgrade, using 64-bit kernel 3.14.2, when I boot into PXE and request an image download, I get the following error messages:

    esas2r: driver will not be loaded because no ATTO esas2r devices were found.
    i2c-parport-light: adapter type was unspecified
    Kernel panic - not syncing: VFS unable to mount root fs on unknown-block (1,0)
    Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff81000000 - 0xffffffff9fffffff)

    I should say that I have tried to use the 32-bit kernel 3.14.2 but the client PC didn’t even get to this error prompt. Similarly, the kernel 3.8.8 core was no good.

    The computer has got an Intel DG41WV motherboard with an on-board Realtek LAN card; and as stated above it worked fine with FOG 0.32.

    The image I’m trying to download is a Windows 7 one which were created using FOG 0.32.

    Any ideas please?

    Thanks.



  • I was actually looking at the official kernel list which has x64 and x 32 bits Archs.
    Just had a look under the unofficial list and spotted the x86_64 and x86 Archs. Good to know they are there.

    Again, thanks for your help.


  • Senior Developer

    [quote=“Achieve94, post: 29833, member: 24570”]Brilliant, the 64-bit kernel solved the problem. Many thanks for your help.

    Just wondering why the 64-bit (kernel 3.14.2) I initially downloaded from the FOG GUI didn’t do the magic.

    Cheers![/quote]

    Maybe you chose an Arch = x86 as opposed to Arch = x86_64?



  • Brilliant, the 64-bit kernel solved the problem. Many thanks for your help.

    Just wondering why the 64-bit (kernel 3.14.2) I initially downloaded from the FOG GUI didn’t do the magic.

    Cheers!


  • Senior Developer

    Try a different kernel:

    [url]https://mastacontrola.com/fogboot/kernel/bzImage[/url] (64 bit kernel)
    [url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url] (32 bit kernel)

    The reason why 3.8.8-core is no good is because it is a 32 bit kernel, where the init you’re trying to load is a 64 bit setup and requires a 64 bit kernel.


Log in to reply
 

397
Online

38937
Users

10696
Topics

101490
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.