Domain Join Question
-
Dude, I don’t know.
I didn’t code the service files at all. It works as it always had. I don’t know what else to tell you.
-
Where are these service files located? I’ll look for myself…
Edit - Nevermind… I found it.
-
Which services files are you referring to? The files found in /var/www/{fogwebdir}/service/ are not the ones that I’m referring to. If you need the files that actually perform the checkin’s they’re located if you’ve checked out the trunk in trunk/FOG Service/
-
I’m actually looking for the command that tells the machine to add to domain. The part that would run right after imaging… It has to be fairly simple to pull that portion out and place it somewhere as it’s own callable function.
-
it’s not just joining after imaging - the client service will join to the domain at the next time it checks in with the server as long as domain join is set/checked under host information and the client checks in as pretty instant the first time the service starts/restarts so the easiest way without you having to mess with code is to just restart the fog service on the remote machine as long as you have admin rights to that machine just run this from command line (a windows machine):
sc.exe \machine restart “FOG Service”
-
Or you can use the command on the location system with Command Prompt (as administrator) with:
[code]net stop “FOG Service”
net start “FOG Service”[/code] -
I’m noticing that my “hostnamechanger” component isn’t running anymore. When the machine boots, the log is only showing “UserTracker”, “SnapinClient”, “DirCleaner”, “GUIWatcher”, and “MODDebug”. This is the same image i’ve been working with for a while now… I’m going to uninstall the client and reinstall to see if it helps.
As for adding to the domain, i’ve managed to get this to run one time, but it failed and this is what the log said… [ATTACH=full]569[/ATTACH]
[url=“/_imported_xf_attachments/0/569_20140224_182410_resized.jpg?:”]20140224_182410_resized.jpg[/url]
-
It looks like domain joining is working, until it tries sending the data back to the host. This isn’t an issue in the hostname.php file, but rather looks to me like the password being sent isn’t encrypted, or there’s a blank username being send. Maybe the password is wrong?
-
I was reading some other forum posts last night and now that you said something about the password not being encrypted… Do I have to encrypt it? Also, I read that you have to put the domain before the username (domain\username). Is this true?
Even if I set those settings right, i’m still having the issue of “hostnamechanger” not running. At least I’m not seeing in fog.log.
-
Did the hostname change happen with the imaging process? Is the hostname set properly already? If it is, it’s not going to change the name because it’s already set.
I believe you do need to have the username as: domain\user or user@domain.
The password does need to be encrypted.
-
No, I don’t have the hostname set during the imaging process. In my unattend.xml, I have put in “<ComputerName>*</ComputerName>”, so the imaged machine gets a randomly generated computer name. After the unattend process runs, the machine reboots, but nothing happens once it gets back to the login screen. It worked fine a few weeks ago. Also, when I check fog.log, there aren’t any entries from hostnamechanger at all. The only other thing I’m thinking is, maybe it got disabled in the client. Is there a way to check, without removing and reinstalling the client software?
-
Yes, check the host service settings.
-
Ok… got it!
Did a little research in other posts and figured it out. First off, you have to encrypt the password or it just flat fails. Secondly, you have to input the username as domain\user. So, for my domain, it’s called intranet.naylor (I didn’t name this crap…)
So…
I had to enter the AD info as follows:
Domain: intranet.naylor
OU: (Blank)
Domain Username: intranet\user
Domain Password: (FOGCrypt Encrypted Password)And that’s THAT! I’m running Zero-Touch!!
-
I may remove the need for the \ all together. I mean, you’ve already got the domain in place, so why not use that, then just have a setup like:
domain: test
ou:
domain username: user
domain password:ao723597u32l4kjfldgpjdas;fjkasupiou2j5kasjfk;Then when the call to send it comes along send it as:
$Host->get(‘ADDomain’).‘’.$Host->get(‘ADUser’)
