Setting up and building UDPCast...Failed!
-
Thanks again. But my troubles are not over yet!
Windows 7 PXE doesn’t receive a bootfile, when booting.
-
It looks like it’s working on a another Windows 7 client! PXE boots up with FOG image solution!
Before it was runing I have connected a Windows 2012 server for DHCP in the network.
-
The PXEboot on the Windows 7 client went well…until…this:
[URL=‘http://http://www.noordlaarderbos.nl/linux/fog-upload-error1.jpg’]www.noordlaarderbos.nl/linux/fog-upload-error1.jpg[/URL]
Maybe a new challenge for Tom?
-
Your link is missing a colon my friend
[url]http://www.noordlaarderbos.nl/linux/fog-upload-error1.jpg[/url]
try
[code]
service portmap restart
service nfs-kernel-server restart
[/code] -
[quote=“Jaymes Driver, post: 22955, member: 3582”]Your link is missing a colon my friend
[url]http://www.noordlaarderbos.nl/linux/fog-upload-error1.jpg[/url]
[/quote]
That’s a bug in this forum.
[quote]
try
[code]
service portmap restart
service nfs-kernel-server restart
[/code][/quote]I had allready tried that and even rebooted the Ubuntu machine, but I didn’t help.
-
My Ubuntu uses rpcbind instead of portmap by the way.
But this didn’t help also:
[code]
service rpdbind restart
service nfs-kernel-server restart
[/code] -
Sorry I had forgotten that tid bit of information, let me beat my head against the wall a little longer and see what I can come up with.
-
try removing your .mntcheck files and recreating them
/images/.mntcheck
/images/dev/.mntcheckedit your /etc/expotrs to look like this
[code]
/images *(ro,async,no_wdelay,insecure_locks,no_root_squash,insecure)
/images/dev *(rw,async,no_wdelay,no_root_squash,insecure)
[/code]ALSO, if you are using the FOG server to store your images (Not a NAS or another server, or save space or something HAS TO BE STORED IN THE /images folder on the Ubuntu box) then try isolating the network with a basic router. Set up a network between the host and the server only and try to image.
-
[quote=“Jaymes Driver, post: 22991, member: 3582”]try removing your .mntcheck files and recreating them
/images/.mntcheck
/images/dev/.mntcheck[/quote]
Done!
[quote}
edit your /etc/expotrs to look like this
[code]
/images *(ro,async,no_wdelay,insecure_locks,no_root_squash,insecure)
/images/dev *(rw,async,no_wdelay,no_root_squash,insecure)
[/code][/quote]
Done! Only change this line from:
/images/dev *(rw,sync,no_wdelay,no_root_squash,insecure)
to:
/images/dev *(rw,async,no_wdelay,no_root_squash,insecure)
[quote]
ALSO, if you are using the FOG server to store your images (Not a NAS or another server, or save space or something HAS TO BE STORED IN THE /images folder on the Ubuntu box) then try isolating the network with a basic router. Set up a network between the host and the server only and try to image.[/quote]
[/quote]
It was allready set to be stored in the /image folder, so no changes there.
As expected I had to connect a Windows 2012 server for the DHCP-options 66 & 67. With the basic router the Windows 7 client didn’t get the right DHCP-data.
I honestly did not had confident that it should be successful now, but at this time I see the blue screen "save partition to image file’.
So I’m very glad, it is working, at last!
Now you are talking about a NAS-server. Is it possible to store the images on a seperate NAS-server (a QNAP f.i.)?
-
Hey if it’s working leave it alone. I was going to have you isolate the network to rule out problems with your network communication or things blocking traffic.
Yes it is possible to use a NAS store.
-
Ok, I’ll leave it alone. Thank you and Tom for all the help!
-
You’re welcome.
All is working then I presume?
-
[quote=“Tom Elliott, post: 23193, member: 7271”]You’re welcome.
All is working then I presume?[/quote]
I have succesfull created an image of a Windows 7 machine. I have not tried to deploy the image back to the Windows 7 machine, but I assume that this is going to work, otherwise I let it know.
