The image deployment is slower than before

[Cristian]

I have an image that, a month ago, deployed quickly, but something has changed in the console, and now, a month later, the image deployment is slower.
The transfert rate for sending an image used to be 1000 GB per minute, but now it is 10 GB per minute.

[Tom Elliott]

@Cristian 1000GB a minute? I’ve seen 20gb a minute, and that is really saying something.

10GB a minute is still well above a typical (generally in my eyes) “normal” speed deployments.

So i’m not really sure where to go.

[Cristian]

@Tom-Elliott Yuar right, it was 10 gb a minute et now, it’s a 3.99 gb.

[Quintin Giesbrecht]

@Cristian Any chance you are sending the image out to new/different machines than before? We have just received some new machines into our fleet (Lenovo neo 50q Gen 4), and we are seeing something similar…we get 14GB/min on the older machines, but these new machines are at about 2GB/min. I started a thread on that here:

https://forums.fogproject.org/topic/17698/fog-very-slow-to-deploy-image-lenovo-neo-50q-gen-4/2

Not sure if yours is for the same or similar reasons, but if it is, it might help to know if they are the same machines as we just got.

Thanks!