Problem To deploy image
-
Hello to All!
I am using the fog in my work, it works well on almost all machines.
But I have some machines where it does deploy.
the fog try to install the new image after 1% but it gives the following error
"
-
Performing Clean up (Stage 1)…Done
-
Changing hostname … ntfs_mst_post_read_fixup magic: 0xca137796 size: 1024 usa_ofs: 26260 usa_count: 23137: Invalid argument
Record 0 has no FILE magic(0xca137796)
Failed to load $MFT-------------------. Imput/Output error
Failed to mount ‘/dev/sda2’: Imput/output error
NTFS is either inconsistent, or there is a harware fault, or it´s a
SoftRAID/FakeRAID hardware. In the first case run chkdsk/f on Windows
them reboot into Windows twice. The usage of the /f parameter is very
important! If the defice is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the ‘dmraid’ documentation
for more details.
umount: can´t umount /ntfs: Invalid argument
Done -
Updating Computer Database Status
-
Database updated!
-
Task complete, computer will now restart
"
I’ve tried everything, I have the system running on 60 machines and it works well.
strange thing is that these same machines does not deploy where I can upload the OS.
Have I updated the BIOS of the machine to test the disk on another machine works deploy.
I am sure that this problem these Boards … but do not know for correcting the problem.
Any idea? Please it is very important and urgent
\Gilberto Ferraz
-
-
additional information.
The same model of pc where I can create the image ***. System img for FOG does not allow uploading the same image.
If I try to change the HD on another machine then the image is placed smoothly by fog.
ie the image created on the PC that can not make UPLOAD works on another machine with the same HD.
The problem can only be in Boad, already updated the kernel fog, since I updated the bios of the Board. but the problem continues.
The motherboard that gives me problems is the model Asus P5QL-E.
I suspect the Fog does not load the drivers from these Disco Motherboard
Nobody can help me more experienced
\Gilberto Ferraz
-
I found the problem!
I put a PCI network card and it works.
That is the problem is in the Ethernet card onBoard.
The solution is to put PCI ethernet cards on all machines, the problem is that they are about 20 machines.
Does anyone know where the settings FOG move to change some parameters?
\ Gilberto Ferraz
