REFInd-Initializing - hangs

[quinniedid]

@Trev-lchs We are an all HP shop. We have to use rEFInd version 0.10.9 for all of our systems to boot correctly. This is definitely something with HP’s EFI setup.

I ran into this problem myself, which you can reference the post https://forums.fogproject.org/topic/11993/refind-pxe-booting-issue

Let me know if you were able to get this working with this version

[jfernandz]

First of all, sorry for resurrecting this old thread. However … I was experiencing this issue with HP machines with BIOS U62 Ver.01.01.21 07/01/2024.

The only way I was able to workaround the issue is by using refind binaries from FOG 1.5.5 as @PeterL says in their answer:

@PeterL said in REFInd-Initializing - hangs:

Your issue with rEFInd is because of HPs EFI.
I have exactly the same issue with ProDesk 400 for quite some time.
The workaround to get those systems booting via rEFInd was a downgrade of the rEFInd binaries.

For me a downgrade to rEFInd out of the FOG 1.5.5 package did the trick.

FOG 1.5.5

Path in the ZIP archive: fogproject-1.5.5.zip\fogproject-1.5.5\packages\web\service\ipxe\refind.efi

The binary is dated 15.11.2018

On a Debian system place the file in /var/www/html/fog/service/ipxe
Once as “refind.efi” and a second time as “refind_x64.efi”.

But I’ve tried with latest rEFInd version from sourceforge as @george1421 points in their answer

@george1421 said in REFInd-Initializing - hangs:

@peterl FWIW the refind files can be located here: https://sourceforge.net/projects/refind/files/

For a very log time FOG shipped with 0.11.0 version of refind. This was a very stable, but old release. Based on the image date you referenced that must be the 0.11.4 release of refind. You might also want to try 0.13.2 (newest at the time of writing). To see if the very latest version of refind works for you.

but even this latest version isn’t able to boot the EFI partition from the internal disk. So weird, not sure how may I help to diagnose this issue for rEFInd project … but I’d like to help. Can’t find a way to increase verbosity for rEFInd despite I’ve tried some config directives in refind.conf

Thank you for this helpful post guys