UEFI pxe boot problem from a network



  • @Sebastian-Roth said in UEFI pxe boot problem from a network:

    ip a s

    root@fogus ~]# ip a s
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: ens2f0np0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether b0:26:28:78:ce:d0 brd ff:ff:ff:ff:ff:ff
        inet 148.60.4.1/21 brd 148.60.7.255 scope global noprefixroute ens2f0np0
           valid_lft forever preferred_lft forever
        inet6 fe80::b226:28ff:fe78:ced0/64 scope link 
           valid_lft forever preferred_lft forever
    3: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
        link/ether 4c:d9:8f:8e:41:0f brd ff:ff:ff:ff:ff:ff
    4: ens2f1np1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
        link/ether b0:26:28:78:ce:d1 brd ff:ff:ff:ff:ff:ff
    5: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
        link/ether 4c:d9:8f:8e:41:10 brd ff:ff:ff:ff:ff:ff
    6: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
        link/ether 52:54:00:1e:69:b9 brd ff:ff:ff:ff:ff:ff
        inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
           valid_lft forever preferred_lft forever
    7: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 1000
        link/ether 52:54:00:1e:69:b9 brd ff:ff:ff:ff:ff:ff
    
    
    ip r s
    default via 148.60.7.254 dev ens2f0np0 proto static metric 102 
    148.60.0.0/21 dev ens2f0np0 proto kernel scope link src 148.60.4.1 metric 102 
    192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown 
    
    

  • Developer

    @lebrun78 Please post output of the two commands: ip a s and ip r s



  • @Sebastian-Roth Fog server is on the vlan where boot uefi pxe works



  • @Sebastian-Roth Yes, if I change vlan, it works…


  • Developer

    @lebrun78 Well than it doesn’t receive PXE boot information at all. Can you take one of those machines and put it into the other VLAN. Does it PXE boot??? Just want to make sure this is not a model specific issue.



  • No bootable device found


  • Moderator

    This is strange. This is the second issue we have relating to pxe booting not working for uefi but working for bios.

    What error are you seeing on the target computer when pxe booting in uefi mode?


Log in to reply
 

282
Online

7.0k
Users

14.2k
Topics

134.4k
Posts