Fog 1.5.7 Locations Plugin pulling image from wrong storage node
-
Thanks Tom, can see that in the GUI ok and it matches what was displayed on screen during installation.
FOG configuration page > FOG Settings > FOG Storage Nodes > STORAGENODE MYSQLPASS
My question was around whether the storage nodes need to be updated to reflect this change? Per this section in the installer unless I’m mistaken.
What is the username to access the database? This information is storage in the management portal under 'FOG Configuration' -> 'FOG Settings' -> 'FOG Storage Nodes' -> 'FOG_STORAGENODE_MYSQLUSER'. Username [fogstorage]: What is the password to access the database? This information is storage in the management portal under 'FOG Configuration' -> 'FOG Settings' -> 'FOG Storage Nodes' -> 'FOG_STORAGENODE_MYSQLPASS'. Password:I’ve updated the 2 master nodes (normal and storage) in Georgia only at this stage and kicked off an image deployment task to a machine in Wisconsin. Its picking up the storage node from Alabama instead still.
To which end I’m going to kill that task and uplift all nodes onto the 1.5.709 dev branch and try again.
regards Tom
-
All storage node have now been uplifted to the latest dev version 1.5.709. I edited the /opt/fog/.fogsettings on each to amend to the new fogstorage creds first.
I’ve deployed image task to Wisconsin desktop now and no longer picking up Alabama storage node, this time it’s selected California.
Going back over my setup, each location is set with Use inits and kernels from this node option checked.
There is a location for each site with 2 in Georgia (head office), 2nd of which I had setup as location for Georgia but linked to the storage node. I don’t think this is actually required so have removed this location entry.
There are only 2 storage groups, Toys’RUs and Mattel with latter being replicated out to all the storage nodes.
All storage nodes therefore are pointed to the Mattel Storage group with exception of the Georgia Head office (normal FOG) server which points to Toys’RUs.
I “think” everything is set as it should be. Is there a log file which shows which storage node is being selected and why?
cheers Tom
-
@Kiweegie I am wondering why you updated the Georgia nodes first but possibly my description was a bit confusing. As long as things are up and running now with all nodes being on
dev-branchthat’s fine.I have gone through the code now a few more times but can’t see any obvious problems with it. Though it’s very hard doing this kind of debugging based solely on assumptions. Could you please connect to your database on the master node, run a query as follows and post the full output here:
shell> mysql -u root -p Password: ... mysql> use fog; ... mysql> SELECT * FROM location; ... -
@Sebastian-Roth said in Fog 1.5.7 Locations Plugin pulling image from wrong storage node:
SELECT * FROM location;
+-----+--------------------+-------+-----------------+----------------+------------+---------------------+--------------+ | lID | lName | lDesc | lStorageGroupID | lStorageNodeID | lCreatedBy | lCreatedTime | lTftpEnabled | +-----+--------------------+-------+-----------------+----------------+------------+---------------------+--------------+ | 2 | Alabama | | 2 | 4 | fog | 2020-01-31 23:37:10 | 1 | | 3 | Connecticut | | 2 | 3 | fog | 2020-01-31 23:37:28 | 1 | | 4 | Louisiana | | 2 | 7 | fog | 2020-01-31 23:39:08 | 1 | | 5 | Arizona | | 2 | 6 | fog | 2020-01-31 23:39:32 | 1 | | 6 | California | | 2 | 8 | fog | 2020-01-31 23:41:10 | 1 | | 7 | Arkansas | | 2 | 5 | fog | 2020-01-31 23:41:35 | 1 | | 8 | Colorado Shop | | 2 | 9 | fog | 2020-01-31 23:42:51 | 1 | | 9 | Kentucky | | 2 | 12 | fog | 2020-02-01 01:22:42 | 1 | | 10 | South Dakota | | 2 | 11 | fog | 2020-02-01 01:23:37 | 1 | | 11 | Wisconsin | | 2 | 10 | fog | 2020-02-01 01:23:53 | 1 | | 12 | Georgia | | 1 | 1 | fog | 2020-02-01 01:24:45 | 1 | | 14 | Colorado Office | | 1 | 13 | kiweegie | 2020-02-01 15:34:10 | 1 | +-----+--------------------+-------+-----------------+----------------+------------+---------------------+--------------+ -
@Kiweegie Sorry, I’d need info from another query as well:
SELECT ngmID,ngmMemberName,ngmIsMasterNode,ngmGroupID,ngmIsEnabled,ngmHostname,ngmMaxClients FROM nfsGroupMembers; -
@Sebastian-Roth said in Fog 1.5.7 Locations Plugin pulling image from wrong storage node:
SELECT ngmID,ngmMemberName,ngmIsMasterNode,ngmGroupID,ngmIsEnabled,ngmHostname,ngmMaxClients FROM nfsGroupMembers;
Here you go
+-------+---------------+-----------------+------------+--------------+----------------+---------------+ | ngmID | ngmMemberName | ngmIsMasterNode | ngmGroupID | ngmIsEnabled | ngmHostname | ngmMaxClients | +-------+---------------+-----------------+------------+--------------+----------------+---------------+ | 1 | GEO01VFOG01 | 1 | 1 | 1 | 10.166.136.199 | 10 | | 2 | GEO01VFOG02 | 1 | 2 | 1 | 10.166.136.198 | 10 | | 3 | CON01VFOG01 | 0 | 2 | 1 | 192.168.7.1 | 10 | | 4 | ALA02VFOG01 | 0 | 2 | 1 | 192.168.1.1 | 10 | | 5 | ARK01VFOG01 | 0 | 2 | 1 | 192.168.9.1 | 10 | | 6 | ARI01VFOG01 | 0 | 2 | 1 | 192.168.11.1 | 10 | | 7 | LOU01VFOG01 | 0 | 2 | 1 | 192.168.6.1 | 10 | | 8 | CAL01VFOG01 | 0 | 2 | 1 | 192.168.2.1 | 10 | | 9 | COL02VFOG01 | 0 | 2 | 1 | 192.168.4.1 | 10 | | 10 | WIS02VFOG01 | 0 | 2 | 1 | 192.168.10.1 | 10 | | 11 | SOU01VFOG01 | 0 | 2 | 1 | 192.168.8.1 | 10 | | 12 | KEN02VFOG01 | 0 | 2 | 1 | 192.168.5.1 | 10 | | 13 | COL01VFOG01 | 0 | 1 | 1 | 192.168.3.1 | 10 | +-------+---------------+-----------------+------------+--------------+----------------+---------------+ -
@Kiweegie Sorry for the delay! I have some time tomorrow to work on this. I’ll try to set things up as close to what you have and try to find what’s wrong.
-
@Sebastian-Roth Appreciate the time and effort Sebastian. Let me know if you need anything tested my side please.
regards Tom
-
In case it leads to any pointers or brainwaves.
I thought initially the main server was imaging fine as images sent from GEO01VFOG01 to devices within Georgia site pick up OK. However I can see an example this morning where a machine is trying to image from COL01VFOG01 (Colorado Office) which is the only storage node in the Toys 'R Us storage group. (I’ve updated my spreadsheet below which didn’t accurately reflect this).
In the greater number of cases imaging from Georgia office to Georgia machines is working but imaging to remote sites is pulling from the wrong storage node.
Looking at the dashboard I can the display for the Mattel Storage group displays 99.9999999
Instead of the split shown by the Toys 'R Us group
This could be purely cosmetic and the display was not meant to handle more than 99 clients. I presume this shows the number of client activity per storage group?
I can’t seem to find any logs for the plugins, are there any?
regards Tom
-
@Kiweegie Not sure if you saw the chat bubble in the top right corner yet. Trying to contact you via PM.
-
@Sebastian-Roth I did now, and have replied
-
Thanks to a support session from @Sebastian-Roth this evening we’ve confirmed that this is actually working as designed.
There are 2 things at play.
One: Location plugin
Albeit the location plugin being installed the active tasks list initially shows the task as linking to the wrong storage node. This is only until such time as the client boots and checks in then updates to show the correct storage node is actually being used.
Two: BIOS boot order on clients
In our case due to changes in the BIOS boot order on the remote site computers they were never seeing the FOG task on boot so the task still shows on the Active Tasks page as wrong storage node.
I will resolve the BIOS issue on the remote sites and then test again and confirm back that all is working as designed.
regards Tom
-
This post is deleted! -
@AlexPDX Please open a new topic as your request has nothing to do with the initial post as far as I can see. Just copy and paste your text from this.
