How to disable FOG FTP passive mode?



  • Hi all!
    I have a problem: my ftp server (vsftpd) is configured to disable passive mode. It is for reason so I can’t enable that on my server. How can I configure FOG FTP client not to use passive ftp mode?
    I tried to change in “fogftp.class.php”
    ‘passive’ => true
    to
    ‘passive’ => false
    but feel no changes at all.
    Thx for any help



  • @Sebastian-Roth Thx for your help, Sebatian!
    I commented out line

    chroot_local_user=YES
    

    And now everything is just fine about my FOG installation.
    MB it makes sense to add into FOG wiki - that vsftpd option is incompatible to FOG.

    Now I need to find a way to chroot one user but not to chroot other, but it is definitely not a FOG problem. (And, it’s simple)

    Thanks again.

    Best regards!


  • Developer

    @Single It’s all good, you are allowed to modify the config on your server to whatever you want. Just saying that letting us know right away would have saved you a lot of time. :-)



  • I’ll check and let you know
    Probably I was stupid but it was required to have more than one FTP user with different FTP folders in that server.


  • Developer

    @Single said in How to disable FOG FTP passive mode?:

    Mb it can be helpful if I paste my vsftpd.conf here

    You are kidding, right?!?! I have not tested this yet but I am fairly sure the config is causing the issue. If you had told us you have a modified config (different from what FOG generates for you) then we would have found the solution in no time. :-)

    chroot_local_user=YES
    secure_chroot_dir=/var/run/vsftpd/empty
    allow_writeable_chroot=YES
    

    Pretty sure this is part of the issue. But there might be other config options as well.

    Default config generated by FOG:

    max_per_ip=200
    anonymous_enable=NO
    local_enable=YES
    write_enable=YES
    local_umask=022
    dirmessage_enable=YES
    xferlog_enable=YES
    connect_from_port_20=YES
    xferlog_std_format=YES
    listen=YES
    pam_service_name=vsftpd
    userlist_enable=NO
    seccomp_sandbox=NO
    


  • # mount | grep images
    /dev/sdc2 on /images type ext4 (rw,relatime)
    

    Now it’s looks like it is vsftpd problem. Mb it can be helpful if I paste my vsftpd.conf here:

    max_per_ip=200
    
    anonymous_enable=NO
    userlist_enable=YES
    userlist_file=/etc/vsftpd/vsftpd.userlist
    user_config_dir=/etc/vsftpd/user_config_dir/
    userlist_deny=NO
    local_enable=YES
    virtual_use_local_privs=YES
    
    write_enable=YES
    local_umask=022
    dirmessage_enable=YES
    xferlog_enable=YES
    connect_from_port_20=YES
    
    xferlog_std_format=NO
    log_ftp_protocol=YES
    vsftpd_log_file=/var/log/vsftp.log
    
    chroot_local_user=YES
    secure_chroot_dir=/var/run/vsftpd/empty
    allow_writeable_chroot=YES
    
    listen=YES
    listen_ipv6=NO
    
    pam_service_name=vsftpd
    
    pasv_enable=NO
    tcp_wrappers=YES
    seccomp_sandbox=NO
    
    #cat /etc/vsftpd/user_config_dir/fogproject 
    local_root=/images
    write_enable=YES
    

  • Developer

    @Single I can’t imagine this to be a firewall issue though we can make sure. Just use ftp command line client directly on the FOG server (ftp localhost) and try rename.



  • @Sebastian-Roth nothing changed


  • Developer

    @Single Try changing the ownership (chown -R fogproject:fogproject /images) and then FTP again. Doesn’t make sense, but give it a go.



  • @Sebastian-Roth said in How to disable FOG FTP passive mode?:

    rename /images/dev/10bf4879d860 /images/buz20_test

    ftp> ls /images/dev
    200 PORT command successful. Consider using PASV.
    150 Here comes the directory listing.
    226 Transfer done (but failed to open directory).
    ftp> rename /images/dev/10bf4879d860 /images/buz20_test
    550 RNFR command failed.
    

    Why???

    FTP is allowed in nft firewall

    ...
    ct state new tcp dport { ftp-data, ftp } accept comment "Allow access to FTP-server"
    ...
    

  • Developer

    @Single Please try logging into FTP via command line client and try renaming/moving those directories:

    ftp fog.server.ip.add
    ...
    ls /images/dev
    rename /images/dev/10bf4879d860 /images/buz20_test
    


  • @Sebastian-Roth

    root@nik-buz-s01:~# id fogproject
    uid=1002(fogproject) gid=1003(fogproject) groups=1003(fogproject),113(ftp)
    root@nik-buz-s01:~# id ftp
    uid=106(ftp) gid=113(ftp) groups=113(ftp)
    root@nik-buz-s01:~# ps aux | grep ftp
    root       717  0.0  0.0   2800   924 ?        Ss   Feb24   0:00 /usr/sbin/in.tftpd --listen --user root --address :69 --ipv4 -s /tftpboot
    root      5411  0.0  0.0   6704   888 pts/0    S+   17:32   0:00 grep ftp
    root     13669  0.0  0.0   6620  2456 ?        Ss   Mar10   0:25 /usr/sbin/vsftpd /etc/vsftpd.conf
    

  • Developer

    @Single Please run these as well:

    id fogproject
    id ftp
    ps aux | grep ftp
    


  • @Sebastian-Roth OK, THX!

    root@nik-buz-s01:~# ls -al /images
    total 896
    drwxrwxrwx 26 fogproject ftp          4096 Mar 11 10:15 .
    drwxr-xr-x 23 root       root         4096 Dec 10 08:56 ..
    -rw-r--r--  1 fogproject fogproject   3235 Mar 11 10:12 123
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 01:09 buz1
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 01:21 buz10
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 00:45 buz11
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 00:44 buz12
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 00:21 buz13
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:29 buz14
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:09 buz15
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:06 buz16
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 01:45 buz17
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 01:29 buz18
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 07:18 buz19
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:47 buz2
    drwxrwxrwx  2 fogproject ftp          4096 Mar 11 10:15 buz20
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:51 buz3
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:53 buz4
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 05:30 buz5
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 06:23 buz6
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:26 buz7
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 02:28 buz8
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 01:26 buz9
    drwxrwxrwx  6 fogproject ftp          4096 Mar  6 11:27 dev
    -rw-rw-rw-  1 fogproject ftp        794038 Dec  7 12:57 fogdb.sql.bak
    drwxrwxrwx  2 fogproject ftp         16384 Jun 29  2018 lost+found
    -rw-r--r--  1 fogproject ftp             0 Mar 10 17:19 .mntcheck
    drwxrwxrwx  2 fogproject ftp          4096 Jun 29  2018 postdownloadscripts
    drwxrwxrwx  2 fogproject ftp          4096 Nov 27 03:42 s02
    
    root@nik-buz-s01:~# ls -al /images/dev
    total 24
    drwxrwxrwx  6 fogproject ftp  4096 Mar  6 11:27 .
    drwxrwxrwx 26 fogproject ftp  4096 Mar 11 10:15 ..
    drwxrwxrwx  2 fogproject ftp  4096 Dec 24 21:10 10bf4879d7a6
    drwxrwxrwx  2 root       root 4096 Mar 10 16:31 10bf4879d860
    drwxrwxrwx  2 root       root 4096 Dec 24 11:19 c86000e14876
    -rwxrwxrwx  1 fogproject ftp     0 Jun 29  2018 .mntcheck
    drwxrwxrwx  2 fogproject ftp  4096 Jun 29  2018 postinitscripts
    
    root@nik-buz-s01:~# getenforce
    Disabled
    
    root@nik-buz-s01:~# df -h
    Filesystem      Size  Used Avail Use% Mounted on
    udev            3.9G     0  3.9G   0% /dev
    tmpfs           787M   84M  703M  11% /run
    /dev/md1        103G  3.5G   94G   4% /
    tmpfs           3.9G     0  3.9G   0% /dev/shm
    tmpfs           5.0M     0  5.0M   0% /run/lock
    tmpfs           3.9G     0  3.9G   0% /sys/fs/cgroup
    /dev/sdc2       989G  392G  548G  42% /images
    /dev/sdc1       845G  747G   56G  94% /data
    tmpfs           787M     0  787M   0% /run/user/1000
    

  • Developer

    @Single Welcome back. Please run the following commands and post output here.

    ls -al /images
    ls -al /images/dev
    getenforce
    df -h
    


  • @Sebastian-Roth Hi Sebastian!
    Sorry about such a huge break but I was busy in another office having no possibility to continue working around our problem.
    Here are some vsftpd logs:

    Tue Mar 10 15:55:58 2020 [pid 28260] FTP command: Client "192.168.0.1", "USER fogproject"
    Tue Mar 10 15:55:58 2020 [pid 28260] [fogproject] FTP response: Client "192.168.0.1", "331 Please specify the password."
    Tue Mar 10 15:55:58 2020 [pid 28260] [fogproject] FTP command: Client "192.168.0.1", "PASS <password>"
    Tue Mar 10 15:55:58 2020 [pid 28259] [fogproject] OK LOGIN: Client "192.168.0.1"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "230 Login successful."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "TYPE A"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to ASCII mode."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,162,19"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "LIST -a /images"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "150 Here comes the directory listing."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "226 Directory send OK."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "RNFR /images/dev/10bf4879d860"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "550 RNFR command failed."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FAIL RENAME: Client "192.168.0.1", "/images/dev/10bf4879d860"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "TYPE I"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to Binary mode."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,138,139"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "STOR /images/buz20"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "553 Could not create file."
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FAIL UPLOAD: Client "192.168.0.1", "/images/buz20", 0.00Kbyte/sec
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP command: Client "192.168.0.1", "QUIT"
    Tue Mar 10 15:55:58 2020 [pid 28261] [fogproject] FTP response: Client "192.168.0.1", "221 Goodbye."
    
    Tue Mar 10 15:56:00 2020 [pid 28267] FTP command: Client "192.168.0.1", "USER fogproject"
    Tue Mar 10 15:56:00 2020 [pid 28267] [fogproject] FTP response: Client "192.168.0.1", "331 Please specify the password."
    Tue Mar 10 15:56:00 2020 [pid 28267] [fogproject] FTP command: Client "192.168.0.1", "PASS <password>"
    Tue Mar 10 15:56:00 2020 [pid 28266] [fogproject] OK LOGIN: Client "192.168.0.1"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "230 Login successful."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "TYPE A"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to ASCII mode."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,183,205"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "LIST -a /images"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "150 Here comes the directory listing."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "226 Directory send OK."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "RNFR /images/dev/10bf4879d860"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "550 RNFR command failed."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FAIL RENAME: Client "192.168.0.1", "/images/dev/10bf4879d860"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "TYPE I"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to Binary mode."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,142,205"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "STOR /images/buz20"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "553 Could not create file."
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FAIL UPLOAD: Client "192.168.0.1", "/images/buz20", 0.00Kbyte/sec
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP command: Client "192.168.0.1", "QUIT"
    Tue Mar 10 15:56:00 2020 [pid 28268] [fogproject] FTP response: Client "192.168.0.1", "221 Goodbye."
    
    Tue Mar 10 15:56:02 2020 [pid 28274] FTP command: Client "192.168.0.1", "USER fogproject"
    Tue Mar 10 15:56:02 2020 [pid 28274] [fogproject] FTP response: Client "192.168.0.1", "331 Please specify the password."
    Tue Mar 10 15:56:02 2020 [pid 28274] [fogproject] FTP command: Client "192.168.0.1", "PASS <password>"
    Tue Mar 10 15:56:02 2020 [pid 28273] [fogproject] OK LOGIN: Client "192.168.0.1"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "230 Login successful."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "TYPE A"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to ASCII mode."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,154,111"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "LIST -a /images"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "150 Here comes the directory listing."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "226 Directory send OK."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "RNFR /images/dev/10bf4879d860"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "550 RNFR command failed."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FAIL RENAME: Client "192.168.0.1", "/images/dev/10bf4879d860"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "TYPE I"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to Binary mode."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,171,239"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "STOR /images/buz20"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "553 Could not create file."
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FAIL UPLOAD: Client "192.168.0.1", "/images/buz20", 0.00Kbyte/sec
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP command: Client "192.168.0.1", "QUIT"
    Tue Mar 10 15:56:02 2020 [pid 28275] [fogproject] FTP response: Client "192.168.0.1", "221 Goodbye."
    
    Tue Mar 10 15:56:02 2020 [pid 28281] [fogproject] FTP response: Client "192.168.0.1", "331 Please specify the password."
    Tue Mar 10 15:56:02 2020 [pid 28281] [fogproject] FTP command: Client "192.168.0.1", "PASS <password>"
    Tue Mar 10 15:56:02 2020 [pid 28280] [fogproject] OK LOGIN: Client "192.168.0.1"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "230 Login successful."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "TYPE A"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to ASCII mode."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,168,195"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "LIST -a /images"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "150 Here comes the directory listing."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "226 Directory send OK."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "RNFR /images/dev/10bf4879d860"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "550 RNFR command failed."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FAIL RENAME: Client "192.168.0.1", "/images/dev/10bf4879d860"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "TYPE I"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to Binary mode."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,150,165"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "STOR /images/buz20"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "553 Could not create file."
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FAIL UPLOAD: Client "192.168.0.1", "/images/buz20", 0.00Kbyte/sec
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP command: Client "192.168.0.1", "QUIT"
    Tue Mar 10 15:56:02 2020 [pid 28282] [fogproject] FTP response: Client "192.168.0.1", "221 Goodbye."
    
    Tue Mar 10 15:56:02 2020 [pid 28288] FTP command: Client "192.168.0.1", "USER fogproject"
    Tue Mar 10 15:56:02 2020 [pid 28288] [fogproject] FTP response: Client "192.168.0.1", "331 Please specify the password."
    Tue Mar 10 15:56:02 2020 [pid 28288] [fogproject] FTP command: Client "192.168.0.1", "PASS <password>"
    Tue Mar 10 15:56:03 2020 [pid 28287] [fogproject] OK LOGIN: Client "192.168.0.1"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "230 Login successful."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "TYPE A"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to ASCII mode."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,200,1"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "LIST -a /images"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "150 Here comes the directory listing."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "226 Directory send OK."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "RNFR /images/dev/10bf4879d860"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "550 RNFR command failed."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FAIL RENAME: Client "192.168.0.1", "/images/dev/10bf4879d860"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "TYPE I"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "200 Switching to Binary mode."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "PORT 10,11,2,1,191,241"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "200 PORT command successful. Consider using PASV."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "STOR /images/buz20"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "553 Could not create file."
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FAIL UPLOAD: Client "192.168.0.1", "/images/buz20", 0.00Kbyte/sec
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP command: Client "192.168.0.1", "QUIT"
    Tue Mar 10 15:56:03 2020 [pid 28289] [fogproject] FTP response: Client "192.168.0.1", "221 Goodbye."
    

    FOG FTP is unable to rename/move the file on server. But, if I’m loggin in via terminal (or any other client), everything is just fine:

    ftp> open
    (to) 192.168.0.1
    Connected to 192.168.0.1.
    220 (vsFTPd 3.0.3)
    Name (): fogproject
    331 Please specify the password.
    Password:
    230 Login successful.
    Remote system type is UNIX.
    Using binary mode to transfer files.
    ftp> put /home/user/lalala /buz20/123
    local: /home/user/lalala remote: /buz20/123
    200 PORT command successful. Consider using PASV.
    150 Ok to send data.
    226 Transfer complete.
    3235 bytes sent in 0.01 secs (249.1270 kB/s)
    ftp> rename /buz20/123 /123
    350 Ready for RNTO.
    250 Rename successful.
    

    Can I / should I upload here some piece of video demonstrating FOG errors?


  • Developer

    @Single Did the logs help you any further?


  • Developer

    @Single Can you please explain why you disabled passive mode in vsftpd? I do understand that you did it by intention but I am wondering if there is more to it (something like NAT or other special network setup) that we might not know yet and cannot read between the lines.

    Did you read the full stackoverflow topic I posted?

    Read my post here on how to enable verbose logging for vsftpd - that might help to find out of the change in PHP code does make any difference at all.



  • @Sebastian-Roth It didn’t work for me. I’ll try to dig PHP further


  • Developer

    @Single said in How to disable FOG FTP passive mode?:

    I tried to change in “fogftp.class.php”
    ‘passive’ => true
    to
    ‘passive’ => false

    From what I see in the code this should work! Try changing the code in line 670ff to this:

            $ftp_pasv = ftp_pasv(
                $this->_link,
                $pasv
            );
            if ($ftp_pasv != true) {
                $this->ftperror($this->data);
            }
            return $ftp_pasv;
    

    There is an interesting post on PHP/FTP/PASV/NAT here as well: https://stackoverflow.com/questions/47020129/how-to-debug-why-php-ftp-wont-work-in-pasv-mode-when-console-ftp-seems-to-work


Log in to reply
 

319
Online

6.8k
Users

14.1k
Topics

133.2k
Posts