Default.IPXE-no such file or directory (2e008081)

[A Former User]

@Tom-Elliott
I had i little issue i try some fix from forum and my system won’t boot properly so i decided new install like before and now i made a copy of this system to prevent this situation.

[george1421]

@TOXYKILLER said in Default.IPXE-no such file or directory (2e008081):

I know it’s a little bit misleading name for server.

In my case I didn’t notice or care about the name. The issue I have is IF fog is installed, the installer will create a /images directory as well as /opt/fog directory. Also the output of the exports command is blank. I would say that the fog installer was never run or never completed running on this system.

[A Former User]

@Tom-Elliott
We are using 11.101.0.0/16 network for this VLAN. All VLANs and network was planed by networks team.

[Tom Elliott]

Here’s what I’m seeing:

There’s too many pictures and not enough context.

For example:

In https://forums.fogproject.org/topic/14031/default-ipxe-no-such-file-or-directory-2e008081/3?page=2# The picture is looking at fog server IP Address: 11.101.212.165 for storage, but web is at 10. (we cannot see the rest of the IP)

Next picture shows web at 192.168.1.101, and storage at 11.101.212.165 (So far both pictures show the same storage IP but not the same web IP.)

Next photo with error shows web at 11.101.149.115, but we cannot see storage (as there was no tasking applied).

Next photo with error fails with 11.101.149.115 with web also at the same machine, but also no storage IP as it’s a usb boot type.

I feel I need to inform (not trying to question your ability at all) that 11.x.x.x is public. There are only 3 private address spaces. Unless you have your router/network completely airgapped for the public address spaces, this can cause potential issues. Especially if your organization owns the 11.x.x.x IP space as you’re exposing your entire network with this.

You should be using the Private address spaces for your imaging and storage. (192.168.x.x Class C CIDR/24, 172.16.x.x Class B CIDR/16, and/or 10.x.x.x Class A CIDR/8) As this will not open potential holes and security issues within your organization as well as prevent serious issues even if all worked properly.

[Tom Elliott]

@TOXYKILLER Here’s what I find for one of your IP’s (if this is you then cool, but still a bit on the “whoa wait a minute” side)

Source: whois.arin.net
IP Address: 11.101.149.115
Name: DODIIS
Handle: NET-11-0-0-0-1
Registration Date: 1/19/84
Range: 11.0.0.0-11.255.255.255
Org: DoD Network Information Center
Org Handle: DNIC
Address: 3990 E. Broad Street
City: Columbus
State/Province: OH
Postal Code: 43218
Country: United States

What does this mean?

Well DoD own’s the IP Space in its entirety of 11.X.X.X (Including 11.101.X.X).

[A Former User]

@Tom-Elliott
We unfortunately do not have comfort of static IPs (it can be added via exception but it’s really hard through the bureaucracy process and providing business justification for this)

FOG add is now 11.101.128.138 (was changed by DHCP during weekend)

Some of these picture are no longer valid.
What are we using now is this 11.101.0.0/16 network.I install fog on latest ubuntu and what a i have done was this https://forums.fogproject.org/topic/7727/building-usb-booting-fos-image/4?page=2 .
After this process task what was necessary for host registration. Registration was completed fine then i assign to this host created image and i schedule task for capturing image from host.
During this appeared this last issue. “/images/dev permission denied”
Nothing else was done on server.

[A Former User]

@Tom-Elliott said in Default.IPXE-no such file or directory (2e008081):

I feel I need to inform (not trying to question your ability at all) that 11.x.x.x is public. There are only 3 private address spaces. Unless you have your router/network completely airgapped for the public address spaces, this can cause potential issues. Especially if your organization owns the 11.x.x.x IP space as you’re exposing your entire network with this.
You should be using the Private address spaces for your imaging and storage. (192.168.x.x Class C CIDR/24, 172.16.x.x Class B CIDR/16, and/or 10.x.x.x Class A CIDR/8) As this will not open potential holes and security issues within your organization as well as prevent serious issues even if all worked properly.

We are not using private add on our site. Only public IPs. Our company should own whole this network 11.0.0.0/8.

[Tom Elliott]

@TOXYKILLER you work with DOD Network Information Center?

[A Former User]

@Tom-Elliott
Nope, I don’t work with DOD.We are using PAT for add. translation. This add. what was mentioned are not public. Sorry for little misunderstanding.

[Tom Elliott]

@TOXYKILLER as long as we know the network is privately spaced and not going to cause issues, that is fine.

Then I would suggest asking your network team to give your fog server a reserved IP address. This is similar to a static IP but you wouldn’t have to keep jumping thru loops to get your server to operate, as it seems your dhcp lease times are very short. The reserved ip still resides with the dhcp server and you wouldn’t have to make any changes to the network configuration on the server for this to work.

Once you have a stationary fog server ip, I think we can get your machine up and running.

[A Former User]

@george1421
/opt/fog directory exist but first mention is missing.
But it can be added manually right (/images directory) ?

[A Former User]

@Tom-Elliott
I have this in my plans but in this state is only testing version(will be never approved exception in this state). We must first test some process and if will be OK then we will request for exemptions for static IP.

[george1421]

@TOXYKILLER If you rerun the fog installer script it should recreate things properly. if you use the wiki instructions and the git method you should just need to change to /root/fogproject/bin and run ./installfog.sh If it prompts you for the the answers again then the installer didn’t complete the first time. Watch for errors.

[A Former User]

@george1421
I try it to install several times but i have same issue with missing files(i try github version too).I also try re run install on existing FOG server but same results .Can you please advise most stable or more less problematic linux distribution ?Fog-install.txt