Dell 7730 precision laptop deploy GPT error message

[jmason]

This post is deleted!

[jmason]

@Sebastian-Roth set it up as described and did a debug deploy. There was a new message I hadn’t seen before:

*Preparing Partition layout
cat: '/images/myImageName/*.size' : No such file or directory

Same message appears after the Attempting to deploy image notice box.

In the Partclone window, the File System partitions for my linux ~500GB drive showed:

/dev/nvme0n1p1 as raw (134.2 MB)
/dev/nvme0n1p2 as FAT16 (209.7 MB)
/dev/nvme0n1p3 as XFS (1.1GB)
/dev/nvme0n1p4 as raw (510.7 GB)

Just checking to see if this is running as expected…will post nvme1n1 partition info from this first run once the current one completes.

[Sebastian Roth]

@jmason Hmmm, forgot to tell you that you need to re-upload the image before deployment. Sorry! On upload the *.size files will be generated.

[jmason]

This post is deleted!

[jmason]

@Sebastian-Roth So with the newly captured image also created with the init_nvme.xz as Host Init, I brought the host for deploy up in debug mode .
I ensured that the init disk order nvme0n1 and nvme1n1 matched the same order for when I made the image (Just like I did last week when deploying to my 19 laptops).

…well running again now with the proper init settings and host image.

[jmason]

@Sebastian-Roth Okay after attempting it the third time I’m sure that I have everything assigned appropriately. Still running in deploy-debug the message is confirmed.

After the Preparing Partition layout message I get the An error has been detected! box.

No drive number passed (restore PartitionTablesAndBootLoaders)  
   Args Passed: /dev/nvme0n1  /images/mydiskimage 50 all

Kernel variables and settings:
bzImage loglevel=4 initrd=init_nvme.xz root=dev/ram0 rw amdisk_size=127000 web=http://192.168.0.1/fog/
consoleblank=0 rootfstype=ext4 shutdown=1 mac=macaddressoflaptop ftp=192.168.0.1 storage=192.168.0.1:/images/ 
storageip=192.168.0.1 osid=50 irqpoll hostname=mylaptop chkdsk=0 img=mydiskimage imgType=mpa imgPartitionType=all 
imgid=11 imgFormat=0 PIGZ_COMP=-6 hostearly=1 isdebug=yes type=down shutdown=1

[Sebastian Roth]

@jmason Ok, seems like I haven’t got it correct on the first try. Need your support now to figure out where I went wrong. In debug deploy, after it failed with the error message please run the following commands, take a picture or post the output here:

blockdev --getsize64 /dev/nvme0n1
blockdev --getsize64 /dev/nvme1n1
cat /images/mydiskimage/*.size

My guess is that the disks are not exactly the same size than the ones you have in the target machine but we’ll see.

[jmason]

@Sebastian-Roth said in Dell 7730 precision laptop deploy GPT error message:

blockdev --getsize64 /dev/nvme0n1

512110190592

blockdev --getsize64 /dev/nvme1n1

1024209543168

cat /images/mydiskimage/*.size

512110190592
1024209543168

[Sebastian Roth]

@jmason said in Dell 7730 precision laptop deploy GPT error message:

cat /images/mydiskimage/*.size

512110190592
1024209543168

Argggg, my fault here. Can you please edit the *.size text files and make those look like this:
d1.size:

1:512110190592

d2.size:

2:1024209543168

(just add the the number and colon at the beginning of each file -> will fix that in the init_nvme.xz soon!)

[jmason]

@Sebastian-Roth No problem…it is running now

Partclone window to recap for the linux disk

/dev/nvme0n1p1 raw 134.2 MB
/dev/nvme0n1p2 FAT16 209.7 MB
/dev/nvme0n1p3 XFS 1.1GB
/dev/nvme0n1p4 raw 510.7 GB

windows disk

/dev/nvme1n1p1 FAT32 681.6 MB
/dev/nvme1n1p2 raw 134.2 MB
/dev/nvme1n1p3 NTFS 1.0 TB
/dev/nvme1n1p4 NTFS 1.0 GB

[Sebastian Roth]

@jmason Don’t actually need all the very details (filesystem and size). Just important we know that nvme0n1 was Linux this time. Please try deployment (does not have to be debug) a couple of times and you should see it deploy Linux to nvme1n1 properly as well if the Linux kernel detects the disks in a different order.

[jmason]

@Sebastian-Roth Running it again in deploy debug so I can make sure with lsblk that it initialized the drives in a different order and not have to hope it’s different.

It came up with windows as nvme0n1 this time and nvme1n1 as linux…

The only odd thing was after writing the windows disk…all of the UUID/partition related set lines were just . . . . . . . . . . . . . . . . . . . . . without any values

Resetting UUIDs for /dev/nvme0n1
Disk UUID being set to ........................................
Partition type being set to ..................................
Partition uuid being set to...................................
etc...
...
...
Resetting swap systems

but it appears to have moved on to nvme1n1 and is writing the linux image correctly.

Next steps?

[Sebastian Roth]

@jmason said in Dell 7730 precision laptop deploy GPT error message:

The only odd thing was after writing the windows disk…all of the UUID/partition related set lines were just

Thanks for mentioning this! Definitely something else I missed. The whole scripting code is a huge thing and very easy to miss things here and there. I am still working on this but will have a new version ready for test in the next days.

[Sebastian Roth]

@jmason Took a little while to get this all sorted. Can you please re-download the init_nvme.xz. It should include all current changes and fixes.

See if the *.size files are being generated properly when capturing the image as well as properly setting UUID and type after deploying the partition images.

[jmason]

@Sebastian-Roth the *.size files were generated properly but the Disk UUID, Partition type, and Partition UUID lines still show just the being set to.................................. after writing an image to a drive. It still appears to be writing the images.

[Sebastian Roth]

@jmason Will be a couple of days till I find enough time to re-examine this. Will let you know.

[jmason]

@Sebastian-Roth So I ran a deploy today not in debug mode and noticed that the UUID lines that were missing in debug mode actually showed what appeared to be UUIDs as the deployment concluded.

[jmason]

@Sebastian-Roth I decided to run these all again after installing FOG on our permanent server with the init_nvme.xz file. I did a new capture and deploy.

I ran deploy in debug mode and regular mode and only the Disk UUID being set to........ is still blank.
The partition type and partition uuid are being set for each partition. Not sure what would have caused that change, unless there was some quick update to the init_nvme.xz file from when I downloaded it Tuesday morning to the test server vs tuesday afternoon to the permanent server.

[Sebastian Roth]

@jmason Hmmmm, thanks for the heads up! Not sure what is going on there but I am fairly sure the init_nvme.xz file on our webserver has not changed since I posted the link last. It’s only Tom and me having access at the moment and I don’t think he’s done anything to it. To me this sounds more like there is still an issue within the scripts that only appears in certain situations. Will try to find it on the weekend.

[jmason]

@Sebastian-Roth Was looking in the images directory here is the contents of the d1.original.uuids file

/dev/nvme0n1 c0c5d1ae-844a-476e-81c6-7df5e3996ef1
 1:d8b3acfb-02fa-4da3-9eee-b42d59256a4f
/dev/nvme0n1p2 2:2607-0C5E 2:ee3b91d5-4673-4e49-9011-7d3e10182cbe
/dev/nvme0n1p3 3:bc88509e-b6ed-49c0-9106-dc7976a67b2a 3:9e96fd40-79f2-4d79-b2e7-574ddd2b5ce6
/dev/nvme0n1p4 4:HtWBPV-9Aom-jBpz-4pyv-qy3A-lf2o-x58axC 4:fea80442-d73a-494d-be20-1aeee1f51158

vs d2.original.uuids files

/dev/nvme1n1 5c273d41-1202-4874-8a69-9af1285c6d77
/dev/nvme1n1p1 1:DEFC-1910 1:2b0507fe-9371-463b-832d-63c3aa24795e
 2:9667e751-1aee-4f09-b9cc-8e1c16b3010b
/dev/nvme1n1p3 3:382631A826316850 3:3adca3cc-702f-4084-9f16-3b8f241cf81e
/dev/nvme1n1p4 4:2C0C9D570C9D1D40 4:e12d4c98-026a-406c-8043-0498c66be933

Not sure if this is helpful in any way but it looked slightly odd missing /dev/nvme0n1p1 and /dev/nvme1n1p2, but may just be some debug info file you are using. Anyway thanks for all your work on this and I’ll keep checking in.