Not able to TFTP boot. Invalid Argument Error

hancocza

@george1421 said in Not able to TFTP boot. Invalid Argument Error:

@george1421 Just wondering is this fog client computer you are trying to USB boot registered in FOG? If so delete the registration and see if it throws the same error.

This happened on both laptops that were registered as well as a few that were not.

I also checked all of the logs after attempting to boot, and it didn’t update any of those logs. I assume that means it’s in line with what Sebastian said about the TLS error.

Sebastian Roth

@hancocza said in Not able to TFTP boot. Invalid Argument Error:

Should I be allowing it to go through the FOG installation again or does that basically reset the iPXE binaries again?

When you run the buidlipxe.sh Script it compiles new binaries including the correct SSL cert and puts them in the “installer directory”. From now on you can run the FOG installer as often as you want, it should always install those HTTPS-enabled iPXE binaries!

hancocza

@Sebastian-Roth Hmm… I did that and still get the same error after. Same error code as well, pointing at the TLS handshake.

Sebastian Roth

@hancocza Sure you don’t get any error from the iPXE build script?

Do you use a custom SSL certificate for the FOG web server?

hancocza

@Sebastian-Roth I don’t think i get one from the script. How could i check?

I do use a custom SSL cert for the web server. In the apache2 site config, it points to the correct cert and key. That’s also why I get the password prompts during installation.

Sebastian Roth

@hancocza said in Not able to TFTP boot. Invalid Argument Error:

I do use a custom SSL cert for the web server.

Ah sorry, I missed that. Then you need to adjust the utils/FOGiPXE/buildipxe.sh Script to point to those custom certs as well. Edit that file and put in the correct paths for CA cert and server cert:

#!/bin/bash
BUILDOPTS="TRUST=/var/www/fog/management/other/ca.cert.pem CERT=/var/www/fog/management/other/ca.cert.pem"
IPXEGIT="https://git.ipxe.org/ipxe.git"
...

This is the default. Change to where you have your custom cert files and compile again! Then rerun the installer as well.

hancocza

@Sebastian-Roth Tried that with our cert that we use. I replaced both the path for both TRUST= and CERT= with the certificate path, compiled and ran the installer. I tried it with the default.ipxe unchanged, as well as with the IP in place of the FQDN in the chain line.

My buildipxe.sh looks like:

#!/bin/bash
BUILDOPTS=“TRUST=/home/fogserver/Documents/fogcert.crt CERT=/home/fogserver/Documents/fogcert.crt”
IPXEGIT=“https://git.ipxe.org/ipxe.git”

The chain line of the default.ipxe looks like this:

chain https://xxx.xxx.xxx.xxx/fog/service/ipxe/boot.php##params

Am I messing up the placement of the certificate? Apache asks for three separate certificate components (certificate, key, chain), am I supposed to have two different certificates specified in the buildipxe.sh?
…

Sebastian Roth

@hancocza said in Not able to TFTP boot. Invalid Argument Error:

am I supposed to have two different certificates specified in the buildipxe.sh?

Yes! The one going in TRUST is the CA cert or possibly what you use in Chain parameter in the apache config. If it is a real chain of two or more certs in the chain I am not sure if iPXE can handle it this way. Give it a try. The CERT is just that, the webserver certificate.

By the way, keeping the certs in the home directory might not be a wise idea. Someone comes along and cleans up the home dir one day and boom all is gone.

hancocza

@Sebastian-Roth I’m kind of at a loss on this. I have tried many different combinations of the certs that I have, have tried using the one fog uses, and have tried the ones provided by iPXE. They all continue to give me invalid argument error. I added the DEBUG=tls line to the buildipxe.sh file, and tried booting. It said my cert was added to the certstore, and then ran through what I’m guessing are handshakes. In the end I still get the invalid argument error.

Is there a way to use my ssl certs for just the web server? Then all of the fog functions would use the supplied fog certs?

Sebastian Roth

@hancocza said in Not able to TFTP boot. Invalid Argument Error:

Is there a way to use my ssl certs for just the web server?

Sorry, but no. iPXE requests information through HTTP(S) and you can’t separate that from the web interface (certs). I suppose you could setup another webserver (like nginx) on another port and run the FOG web UI on that. But that’s not a great way - don’t go there!

I am fairly sure we can get this to work for you. Let’s start by talking about the certificate. Where did you get it from. What CN is it dedicated to and does it have any extensions enabled? Please run openssl x509 -in /path/to/custom/certificate.crt -text -noout and post output here. A certificate is the public part of a public/private key crypto system and hence there should be no issue posting this content here. If you’d prefer you could also just send me a private message with the information.

hancocza

@Sebastian-Roth
Darn.

The certificate was purchase through Go Daddy. The CN is associated with our main web server. I added the domain name of the fog server to the “other names” section in order to cover that as well. I don’t believe it has any extensions enabled.

Here is the output:

Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number: 1807900440220026086 (0x1916f3df289644e6)
        Signature Algorithm: sha256WithRSAEncryption
        Issuer: C = US, ST = Arizona, L = Scottsdale, O = "GoDaddy.com, Inc.", OU = http://certs.godaddy.com/repository/, CN = Go Daddy Secure Certificate Authority - G2
        Validity
            Not Before: Mar 15 18:52:13 2018 GMT
            Not After : Jul 13 16:53:00 2019 GMT
        Subject: OU = Domain Control Validated, CN = csims.clas.gvsu.edu
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                RSA Public-Key: (2048 bit)
                Modulus:
                    00:e2:79:a6:3f:ac:83:5a:ec:97:ab:2c:74:95:a5:
                    2e:cc:30:41:f6:32:f0:4f:e5:2a:fb:c7:dd:7d:52:
                    9b:a0:8c:20:4e:1d:c2:7f:d5:99:ca:3b:b7:f5:ca:
                    05:dc:f6:85:a8:e5:99:03:95:77:6b:49:67:fe:b9:
                    cb:78:8c:da:9f:3b:89:db:46:7a:c7:e2:ed:22:04:
                    84:f5:61:2f:58:9d:0a:ee:66:9e:26:40:fe:54:8f:
                    a8:44:fd:75:16:dd:1a:24:d5:77:28:8f:f5:79:76:
                    ab:9f:92:f2:fe:e1:f5:1e:17:e6:7f:d3:b2:07:52:
                    8f:60:94:28:3a:48:e6:8a:3b:57:0c:6d:4d:30:d3:
                    23:de:76:07:3a:f3:bf:60:ef:26:47:c4:17:45:54:
                    71:d7:ce:c0:e8:ef:c3:f8:42:d5:3c:47:1b:5d:97:
                    96:a6:2a:3d:dd:ac:d7:4e:38:03:68:f4:29:eb:80:
                    fb:48:04:40:f6:f7:4d:19:34:a5:d8:6e:ec:5b:15:
                    e1:97:42:17:4c:bc:c2:55:cf:44:80:ca:0d:5f:20:
                    fb:98:c6:25:e3:12:19:a0:bb:b2:e8:b1:cf:fc:2e:
                    00:10:ab:e6:7b:da:85:01:6d:0b:d7:ed:53:c8:ae:
                    d4:18:e4:52:ab:86:aa:c1:14:e3:6c:47:fe:0b:a2:
                    9c:db
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Extended Key Usage: 
                TLS Web Server Authentication, TLS Web Client Authentication
            X509v3 Key Usage: critical
                Digital Signature, Key Encipherment
            X509v3 CRL Distribution Points: 

                Full Name:
                  URI:http://crl.godaddy.com/gdig2s1-815.crl

            X509v3 Certificate Policies: 
                Policy: 2.16.840.1.114413.1.7.23.1
                  CPS: http://certificates.godaddy.com/repository/
                Policy: 2.23.140.1.2.1

            Authority Information Access: 
                OCSP - URI:http://ocsp.godaddy.com/
                CA Issuers - URI:http://certificates.godaddy.com/repository/gdig2.crt

            X509v3 Authority Key Identifier: 
                keyid:40:C2:BD:27:8E:CC:34:83:30:A2:33:D7:FB:6C:B3:F0:B4:2C:80:CE

            X509v3 Subject Alternative Name: 
                DNS:csims.clas.gvsu.edu, DNS:www.csims.clas.gvsu.edu, DNS:fogserver.gvsu.edu, DNS:csimsweb.clas.gvsu.edu, DNS:viewlinc.clas.gvsu.edu
            X509v3 Subject Key Identifier: 
                AB:E1:0F:46:89:C4:69:F7:D0:6E:C6:A1:40:E4:C5:70:7A:EA:C4:74
    Signature Algorithm: sha256WithRSAEncryption
         2a:1a:42:5a:21:ba:ac:81:cd:6e:7b:6f:73:55:92:5b:cc:d5:
         93:de:32:7c:b7:56:53:d5:8c:7c:4c:5d:4b:6e:cd:d9:2c:8e:
         a4:87:39:9d:85:05:3f:c8:12:fc:c0:d2:b3:c8:de:67:15:02:
         b9:22:5a:6d:f1:6a:f7:12:a0:28:b8:e6:69:c6:82:c5:61:ce:
         ff:cf:a5:9c:f3:6c:08:51:04:c8:4f:8a:28:08:be:a4:06:d7:
         54:26:91:9f:3b:76:7f:cb:7c:71:63:e3:54:f0:d4:8a:f9:a2:
         06:cb:11:dd:a4:4c:5d:c1:9a:5d:bb:96:6f:13:90:56:e4:e2:
         bd:11:b2:83:67:c2:9f:99:9b:60:10:40:c8:8b:56:5c:3d:95:
         2d:24:d8:7d:53:2d:2f:eb:fe:73:c4:54:ff:fc:73:12:51:b4:
         86:16:64:56:bf:4c:99:96:d3:2e:0e:d5:33:58:84:09:6b:ce:
         16:f1:b8:91:2f:cd:8b:35:52:e7:3d:d1:83:b8:5e:d9:9b:ce:
         8c:f8:0f:80:5c:23:60:5a:91:07:45:e2:fc:8d:0c:ee:c6:56:
         8c:76:c4:23:33:14:e6:80:56:33:d1:ef:30:b1:26:be:9f:34:
         ac:b9:74:ae:9c:89:d5:b7:76:f0:cb:88:bb:7c:41:fc:d5:70:
         16:98:0a:a7

Sebastian Roth

@hancocza said in Not able to TFTP boot. Invalid Argument Error:

Subject: OU = Domain Control Validated, CN = csims.clas.gvsu.edu

So this is the main subject it was created for. All the other DNS names we find in the alternative subject extension further down. I am not exactly sure about this from the top of my head but possibly iPXE does not support using the alternative subjects from a cert. I will check this out and get back to you.

Sebastian Roth

@hancocza Oh man/woman, I have overlooked the most obvious problem with this. iPXE is connecting to the IP address instead of hostname and therefore cannot match the names in the certificate. I just had a quick look at the manual pages and seems like iPXE can handle alternative subjects, so I was wrong in my last post.

Edit /tftpboot/default.ipxe on your FOG server and make it use the DNS name instead of the IP.

hancocza

@Sebastian-Roth the default.ipxe file already specifies the fqdn of fogserver.gvsu.edu. on 1.5.0, I would just change it to the IP and change https to http and not recompile, and it all worked fine. Since we’ve been doing this, I’ve left it as https://fogserver.gvsu.edu/…

If it could still be an issue of the two separate certs (ca and server) in the buildipxe.sh, I’m not sure what to use as the ca one. Go Daddy uses an intermediate cert instead of a CA, but that was the chain one that we weren’t sure if it’d work.

Sebastian Roth

@hancocza Please check to see if you have also set the FQDN in FOG configuration -> FOG settings -> Web Server -> WEB HOST! Writing my last messages in the train where I don’t have good access to the code I forgot about this.

From the information you posted I would expect you’d need to use the GoDaddy Secure Server Certificate (Intermediate Certificate) - G2 as TRUST. This (or more precisely its private key) should be exactly the one that was used to sign your certificate.

hancocza

@Sebastian-Roth said in Not able to TFTP boot. Invalid Argument Error:

@hancocza Please check to see if you have also set the FQDN in FOG configuration -> FOG settings -> Web Server -> WEB HOST! Writing my last messages in the train where I don’t have good access to the code I forgot about this.

From the information you posted I would expect you’d need to use the GoDaddy Secure Server Certificate (Intermediate Certificate) - G2 as TRUST. This (or more precisely its private key) should be exactly the one that was used to sign your certificate.

I had the IP set in the WEB HOST field. I switched that now. Also updated the TRUST parameter in buildipxe.sh to have that cert. I’ll test tomorrow and see what happens!

hancocza

@Sebastian-Roth Just tested, still a no go. Trust line looks like this with the intermediate cert:

BUILDOPTS=“CERT=/home/fogserver/Documents/csims.clas.gvsu.edu/fogcert.pem TRUST=/home/fogserver/Documents/csims.clas.gvsu.edu/GoDaddyCA.pem”

Sebastian Roth

@hancocza said in Not able to TFTP boot. Invalid Argument Error:

GoDaddyCA.pem

Sure this is the same one that I pointed out? Please run the following commands to check:

cd /tmp/
wget https://certs.godaddy.com/repository/gdig2.crt.pem
sha256sum gdig2.crt.pem /home/fogserver/Documents/csims.clas.gvsu.edu/GoDaddyCA.pem
...

See if you get the same hash for both files.

You might need to use different ones for iPXE versus the ones used for Apache. Apache needs the full trust chain I reckon. You have some major root CA certificates installed on your system already and point Apache to some chain certificates (possibly two intermediate ones) so the chain is fully trusted. For iPXE I guess (sorry, don’t have enough time to test or look it up right now) you only need to trust the one single certificate/key that was used to issue your web server certificate and I think that is https://certs.godaddy.com/repository/gdig2.crt.pem in your case.

hancocza

@Sebastian-Roth It wasn’t the one you mentioned. I downloaded the correct one and put it in place, still got an invalid argument error. Do i need to append my certificate to the trust as well, so that it looks like:

TRUST=/home/fogserver/Desktop/gdig2.crt.pem,/home/fogserver/Documents/csims.clas.gvsu.edu/fogcert.crt

I was looking at this website when I came across that: https://ipxe.org/crypto

Sebastian Roth

@hancocza said in Not able to TFTP boot. Invalid Argument Error:

Do i need to append my certificate to the trust as well

Don’t think you have to. But reading more about how (open)ssl certificate verification works I figured that I was wrong with one of my assumptions. The intermediate certificate is not enough as it is not selfiestick signed (only root certs are). So you’d need to specify intermediate and root cert as TRUST.

Not able to TFTP boot. Invalid Argument Error

208

11.6k

17.1k

154.6k