FOG 1.3.5 RC 16
-
@lorde What same error?
-
@Tom-Elliott Reported by user david77
https://forums.fogproject.org/assets/uploads/files/1489673608949-error.jpeg
-
@lorde Is it the exact same error or very similar? This is important. If it’s the exact same (5986 but reported 5993) (it would appear to be 5 blocks of difference).
-
@Tom-Elliott Is very similar.
-
Building newer init’s currently.
For the capture, I am under the suspicion the problem is partclone’s own checking of the filesystem.
I’m removing the “checker” portion I’ll let you know what to do if you don’t mind testing.
-
Please try these:
wget -O /var/www/fog/service/ipxe/init.xz http://mastacontrola.com/init.xz wget -O /var/www/fog/service/ipxe/init_32.xz http://mastacontrola.com/init_32.xz
-
@Tom-Elliott Of course I’ll test. Just say what to do. Tanks
-
@lorde Already did.
-
@Tom-Elliott Same error.
I tested the image already created, same error, erased the image and created new, same error.
Anything else I can test? -
@Tom-Elliott Perhaps it could have to do with the recent resize adjustmenst, or just for asking maybe with the new ipxe version.
We want to take fog productive next week. First step would be to rollout via laptop in the same subnet. - Our network department blocks supporting multicast over vlan, argueing multicasting would not be a good idea, cause just one packet loss would corrupt the result.
We hope to rollout at least with a laptop, if the current bad blocks error is fixed. I am to stupid to revert to RC 14, where it did function.
-
@david77 I’m building some inits on the thought that the disk alignment is a portion of the problem you’re seeing. If you get a chance please run:
wget -O /var/www/fog/service/ipxe/init.xz https://fogproject.org/inits/init.xz wget -O /var/www/fog/service/ipxe/init_32.xz https://fogproject.org/inits/init_32.xz
With any luck things might just be workable again.
-
Same for you @UWPVIOLATOR
-
@Tom-Elliott Did it and
-
@david77 can you retry the download please? It appears to me something didn’t upload fully
-
Can do it earliest this afternoon.
-
@Tom-Elliott said in FOG 1.3.5 RC 16:
wget -O /var/www/fog/service/ipxe/init.xz https://fogproject.org/inits/init.xz
wget -O /var/www/fog/service/ipxe/init_32.xz https://fogproject.org/inits/init_32.xzI run the update commands, and it is already working, it has already gone to the next stage cloning Windows 10. It seems all normal now. I’m going to continue the tests.
Tanks@Tom Elliott