Unable to image

[marvin_z]

Hi,

Greetings fellow Fog users, I wonder if one of you experts can help me with my FOG problem. First of all some background info:

Fog 0.32

Now the problem, we recently got batch of Dell Precision T1700s with Intel I217-LM network cards and it seems like Fog does not like them. Computer run Bios A10 with intel boot agent 1.5.50, below are the steps that i took so far:

1. Updated kernel to 3.14.2 32 bit with this kernel, computers can be inventoried but all attempts to image end with kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009

[ATTACH=full]1463[/ATTACH]

2. Updated Kernel via SSH by running these commands:

cd /tftpboot/fog/kernel
mv bzImage bzImage.orig.10302014
wget -O bzImage --no-check-certificate [url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url]
chown -R fog:root /tftpboot

After this things work little bit better, there is no kernel panic but it seems computer just sits on Loading fog/images/init/gz…ready.
and nothing happens next.
[ATTACH=full]1464[/ATTACH]
Any help would be greatly appreciated.

Thanks

[url=“/_imported_xf_attachments/1/1463_IMG_3728.JPG?:”]IMG_3728.JPG[/url][url=“/_imported_xf_attachments/1/1464_FullSizeRender.jpg?:”]FullSizeRender.jpg[/url]

[Tom Elliott]

It sounds like you’re using the correct kernel.

Can you try running a memtest?

[TheKoR]

I’ve got the same error when i have a conflict between 2 dhcp.

[marvin_z]

Thanks for replies. Memtest is running, right now it is at 50% mark after 35 minutes, i will post results once it is fully done. As far as DHCP server, we only have one in the environment and other computers seem to image fine.

[Tom Elliott]

While you’re waiting for the memtest to complete, is it spitting out tons of red’s?

[marvin_z]

Nothing that i can see
[ATTACH=full]1468[/ATTACH]

[url=“/_imported_xf_attachments/1/1468_IMG_3732.JPG?:”]IMG_3732.JPG[/url]

[marvin_z]

Looks like first pass finished and no errors.[ATTACH=full]1469[/ATTACH]

[url=“/_imported_xf_attachments/1/1469_IMG_0004.JPG?:”]IMG_0004.JPG[/url]

[marvin_z]

I think i found the solution, I downgraded Bios to A8 from A10 and computer is imaging now. Thanks everybody for their help!!!