TFTP seems to not be loading in fog 1.2.0 on ubuntu 14.04

sushant jangale

previously the problem I was getting is that after it boots from the network, it seems as everything goes fine until it gets to [[I]configuring (net0 70:5a:…[/I].)].
After that it reboots without going into the fog menu.

I’m trying to register and image an Lenovo S30. Previously I was able to image these workstations from Fog 0.32
I did some troubleshooting…
Now the problem is:
When I boot from network, DHCP loads but it gets stuck there.

This is what I’m seeing on the screen

CLIENT MAC ADDR: #### GUID: ######
CLIENT IP: #### MASK: #####
GATEWAY IP: #######

TFTP seems to not be loading

thanks

sushant jangale

Here is my fog install log file

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 10.89.63.5
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

     DHCP will NOT be setup but you must setup your
     current DHCP server to use FOG for PXE services.

     On a Linux DHCP server you must set:
         next-server

     On a Windows DHCP server you must set:
         option 066 & 067

               Option 066 is the IP of the FOG Server: (e.g. 10.89.63.5)
               Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-json
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.

Press enter to acknowledge this message.

Reading package lists…
Building dependency tree…
Reading state information…
The following extra packages will be installed:
libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl
libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-server-5.5
mysql-server-core-5.5
Suggested packages:
libmldbm-perl libnet-daemon-perl libplrpc-perl libsql-statement-perl
libipc-sharedcache-perl tinyca mailx
The following NEW packages will be installed:
libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl
libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-server
mysql-server-5.5 mysql-server-core-5.5
0 upgraded, 10 newly installed, 0 to remove and 40 not upgraded.
Need to get 8,402 kB of archives.
After this operation, 92.9 MB of additional disk space will be used.
Get:1 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty/main libaio1 amd64 0.3.109-4 [6,364 B]
Get:2 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty/main libdbi-perl amd64 1.630-1 [879 kB]
Get:3 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty/main libdbd-mysql-perl amd64 4.025-1 [99.3 kB]
Get:4 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty/main libterm-readkey-perl amd64 2.31-1 [27.4 kB]
Get:5 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty-updates/main mysql-client-core-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [701 kB]
Get:6 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty-updates/main mysql-client-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [1,454 kB]
Get:7 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty-updates/main mysql-server-core-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [3,213 kB]
Get:8 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty-updates/main mysql-server-5.5 amd64 5.5.38-0ubuntu0.14.04.1 [1,944 kB]
Get:9 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty/main libhtml-template-perl all 2.95-1 [65.5 kB]
Get:10 [url]http://in.archive.ubuntu.com/ubuntu/[/url] trusty-updates/main mysql-server all 5.5.38-0ubuntu0.14.04.1 [12.4 kB]
Fetched 8,402 kB in 40s (209 kB/s)
Preconfiguring packages …
Selecting previously unselected package libaio1:amd64.
(Reading database … 167242 files and directories currently installed.)
Preparing to unpack …/libaio1_0.3.109-4_amd64.deb …
Unpacking libaio1:amd64 (0.3.109-4) …
Selecting previously unselected package libdbi-perl.
Preparing to unpack …/libdbi-perl_1.630-1_amd64.deb …
Unpacking libdbi-perl (1.630-1) …
Selecting previously unselected package libdbd-mysql-perl.
Preparing to unpack …/libdbd-mysql-perl_4.025-1_amd64.deb …
Unpacking libdbd-mysql-perl (4.025-1) …
Selecting previously unselected package libterm-readkey-perl.
Preparing to unpack …/libterm-readkey-perl_2.31-1_amd64.deb …
Unpacking libterm-readkey-perl (2.31-1) …
Selecting previously unselected package mysql-client-core-5.5.
Preparing to unpack …/mysql-client-core-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb …
Unpacking mysql-client-core-5.5 (5.5.38-0ubuntu0.14.04.1) …
Selecting previously unselected package mysql-client-5.5.
Preparing to unpack …/mysql-client-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb …
Unpacking mysql-client-5.5 (5.5.38-0ubuntu0.14.04.1) …
Selecting previously unselected package mysql-server-core-5.5.
Preparing to unpack …/mysql-server-core-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb …
Unpacking mysql-server-core-5.5 (5.5.38-0ubuntu0.14.04.1) …
Selecting previously unselected package mysql-server-5.5.
Preparing to unpack …/mysql-server-5.5_5.5.38-0ubuntu0.14.04.1_amd64.deb …
Unpacking mysql-server-5.5 (5.5.38-0ubuntu0.14.04.1) …
Selecting previously unselected package libhtml-template-perl.
Preparing to unpack …/libhtml-template-perl_2.95-1_all.deb …
Unpacking libhtml-template-perl (2.95-1) …
Selecting previously unselected package mysql-server.
Preparing to unpack …/mysql-server_5.5.38-0ubuntu0.14.04.1_all.deb …
Unpacking mysql-server (5.5.38-0ubuntu0.14.04.1) …
Processing triggers for man-db (2.6.7.1-1) …
Processing triggers for ureadahead (0.100.0-16) …
Setting up libaio1:amd64 (0.3.109-4) …
Setting up libdbi-perl (1.630-1) …
Setting up libdbd-mysql-perl (4.025-1) …
Setting up libterm-readkey-perl (2.31-1) …
Setting up mysql-client-core-5.5 (5.5.38-0ubuntu0.14.04.1) …
Setting up mysql-client-5.5 (5.5.38-0ubuntu0.14.04.1) …
Setting up mysql-server-core-5.5 (5.5.38-0ubuntu0.14.04.1) …
Setting up mysql-server-5.5 (5.5.38-0ubuntu0.14.04.1) …
140807 21:46:55 [Warning] Using unique option prefix key_buffer instead of key_buffer_size is deprecated and will be removed in a future release. Please use the full name instead.
mysql start/running, process 10545
Setting up libhtml-template-perl (2.95-1) …
Processing triggers for ureadahead (0.100.0-16) …
Setting up mysql-server (5.5.38-0ubuntu0.14.04.1) …
Processing triggers for libc-bin (2.19-0ubuntu6) …

Installing package: mysql-client
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext
Installing package: clamav-freshclam

Confirming package installation.

Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-json…OK
Checking package: php5-gd…OK
Checking package: php5-cli…OK
Checking package: php5-mysql…OK
Checking package: php5-curl…OK
Checking package: mysql-server…OK
Checking package: mysql-client…OK
Checking package: tftpd-hpa…OK
Checking package: tftp-hpa…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: sysv-rc-conf…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: build-essential…OK
Checking package: cpp…OK
Checking package: gcc…OK
Checking package: g++…OK
Checking package: m4…OK
Checking package: htmldoc…OK
Checking package: lftp…OK
Checking package: openssh-server…OK
Checking package: php-gettext…OK
Checking package: clamav-freshclam…OK

Configuring services.

Setting up fog user…OK
Setting up and starting MySql…OK
Backing up user reports…OK
Did you leave the mysql password blank during install? (Y/n) n
Please enter your mysql password:
Please re-enter your mysql password:
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:

[url]http://10.89.63.5/fog/management[/url]

Press [Enter] key when database is updated/installed.

Configuring Fresh Clam…OK
Setting up storage…OK
Setting up and starting NFS Server…OK
Setting up and starting DHCP Server…Skipped
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scripts…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…OK
Starting FOG Image Replicator Server…OK
Starting FOG Task Scheduler Server…OK
Setting up FOG Utils…OK

sushant jangale

Hey It is working now…
i have changed option 67 at dhcp server from undionly.kpxe to undionly.kkpxe
and updated init.xz and init_32.xz from the url
[url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/init.xz[/url]
[url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/init_32.xz[/url]

TFTP seems to not be loading in fog 1.2.0 on ubuntu 14.04

290

11.6k

17.1k

154.6k