Just Trying To Get Started
-
On HP Elitebook (client):
no DHCP or ProxyDHCP offers were received.
I am using the exact ltsp.conf that you showed me (no changes).
FOG machine and Elitebook both plugged into Cisco 2960 ports 1 & 2
-
Since the FOG machine is not hooked up to my network anymore (because you had me move it to an isolated switch) I don’t know its IP address so I couldn’t modify to ltsp.conf to be any more specific.
-
I’m going to step in a little bit. You’re over thinking I think a little bit.
If you take the client system and place the network on the same switch as your FOG server does all work?
If it doesn’t work, then the problem is either DHCP isn’t handing out the right pointers to your FOG Server (Option 66/Option 67) or your switch is blocking the passing of this data to the FOG Server, or the service isn’t running on the FOG Server.If the first switch works, then step to the next switch and try again, if that doesn’t work then something in that second switch is blocking access out. If all works fine, step back to the next switch in the chain. And so forth.
-
[quote=“Phil Brackett, post: 32434, member: 24966”]Since the FOG machine is not hooked up to my network anymore (because you had me move it to an isolated switch) I don’t know its IP address so I couldn’t modify to ltsp.conf to be any more specific.[/quote]
You should set a static ip address for the machine. It shouldn’t matter what switch you move it to, you should always have the same ip address.
-
Okay, here’s where I am:
Both the client and the server are connected to a small 8 port hub (which is also connected to the network, so my server could have its IP address, 10.10.0.178).
I edited the ltsp.conf file from here [URL=‘http://fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server#DNSMASQ_settings_for_iPXE’]http://fogproject.org/wiki/index.ph...with_no_DHCP_server#DNSMASQ_settings_for_iPXE[/URL]
the only active lines in the ltsp.conf are
[CODE]port=0
log-dhcp
tftp-root=/tftpboot
dhcp-boot=undionly.kpxe,10.10.0.178
dhcp-no-override
pxe-prompt=“Press F8 for boot menu”, 5
pxe-service=X86PC, “Boot from network”, undionly
dhcp-range=10.10.0.178,proxy[/CODE]When I PXE boot the client, TFTP picks up so fast that I can’t see without slow-mo what it’s saying. Then the screen reads “iPXE initializing devices…”
Then (thanks to slow-mo) it errors out with “/default.ipxe… Error 0x3d126001 ([url]http://ipxe.org/3d126001[/url])”
-
Well, since no one has had anything to say on this thread for many days, let me see if I can revive the discussion…
I have decided to scrap my current install and reinstall 13.10 and 1.1.2, with the intention of modifying my DHCP server settings to point PXE booting devices to the FOG server. The ProxyDHCP approach was my first choice because it wasn’t going to involve screwing with my DHCP server settings, thereby maintaining the integrity of my old system (Windows Deployment Services).
But, at this point, I am willing to “jump all in” to get a FOG server that works.
So, as I am getting ready to install FOG, what choices should I make during the install process, considering what I intend to do? Should I just choose the defaults, or does some special configuration need to happen?
-
Hi,
i think you are good with:
[LIST=1]
[][LIST]
[]Type 2 and press Enter for Ubuntu installation.
[]Type N and press Enter for Normal installation
[]Supply IP Address, it SHOULD be the static IP address you set up earlier, if it is not please revert to step 5 and try again.
[]Type Y and press Enter setup DHCP Server.
[]Enter the IP Address associated with your DHCP Server
[]Type Y and press Enter to set up DNS.
[]Enter the DNS Server address and press Enter.
[]Type N and press Enter to leave the default Network Card the same.
[]Type N to disable DHCP Service.
[][B]NOTE: It tells you that in order to use your PXE server you have to run a few commands on your DHCP server, this is not entirely true, but it definitely helps, this will point your clients to your server, or you can disconnect your server from the outside world while you image.[/B]
[]Type N to not install Additional Languages.
[]Type Y and press Enter.
[/LIST]
[]Next it will verify the settings, make sure everything has been entered correctly.
[LIST]
[][B]NOTE: I set up Fog with default passwords for MYSQL and users, you can supply information if you like, just make notes.[/B]
[]Type a password for the “root” user in MySQL and press enter.
[]Type the Password again and press enter.
[]Type the Password again and press enter.
[]Type Y to send your install information to the Project, and it will take some time to complete.
[/LIST]
[]Now we need to set up the web GUI for FOG. Open your browser and navigate to [URL=‘http://%28serveripaddress%29/fog/management’]http://(serveripaddress)/fog/management[/URL]. Or click the link in the Terminal window.
[]The web GUI will alert you to back up your database for MYSQL Server and install the upgrades, do so and follow the upgrade instructions.
[]Next log in, default user name is FOG and the password is password.
[/LIST]
[url]http://fogproject.org/wiki/index.php/Ubuntu_12.04[/url][SIZE=5][B]Modifying existing DHCP server to work with FOG[/B][/SIZE]
If you already have a DHCP server setup on your network you don’t want two. So if you chose to not install DHCP during FOG installation you will need to set some options in your current DHCP server to point PXE services to the FOG server.
[SIZE=5][B]Windows[/B][/SIZE][SIZE=4][B]0.33 and up[/B][/SIZE]
To set options 066 and 067 on Windows Server:
[LIST=1]
[]Open DHCP configuration [B]Start[/B] > [B]Administrative Tools[/B] > [B]DHCP[/B].
[]Then expand your server, expand the applicable scope (often only one is there)
[]right click on [B]Scope Options[/B]
[]click [B]Configure Options[/B]
[]tick [B]066[/B] and enter the IP Address of the FOG server
[]tick [B]067[/B] and enter [B]undionly.kpxe[/B].
[*]Make sure that 060 is unticked.
[/LIST]
For a video walk through jump to 6:44, on:[media=youtube]Ak6kfvGM0Dk[/media]
[SIZE=5][B]Linux[/B][/SIZE][SIZE=4][B]0.33 and up[/B][/SIZE]
If you would like to use an existing Linux based DHCPD server you will need to perform the following steps:
[LIST=1]
[]Edit your dhcpd.conf file (ie: vim /etc/dhcpd.conf)
[]In the global section or in a subnet declaration add [B]next-server X.X.X.X;[/B] and [B]filename “undionly.kpxe”[/B]; where X.X.X.X is the IP of your FOG server.
[]Restart your dhcpd server (ie: service dhcpd restart)
[/LIST]
[LIST]
[]For more, see: [URL=‘http://fogproject.org/wiki/index.php/Linux_DHCP_Server’]Can I use my existing linux DHCP Server?[/URL]
[/LIST][URL=‘http://fogproject.org/wiki/index.php/Modifying_existing_DHCP_server_to_work_with_FOG’]for more see: http://fogproject.org/wiki/index.php/Modifying_existing_DHCP_server_to_work_with_FOG[/URL]
The WIKI is your friend!
Regards X23
-
Scratch that.
I found these:
[url]http://www.fogproject.org/wiki/index.php/Integrating_FOG_into_an_Existing_Network[/url]
I have changed the DHCP settings (066 & 067) for a couple of scopes in my network (just to test), according to the above directions.
Now, to test!
-
Thanks, X23.
Your post must have been formulated as I was looking for the very answers you provided.
-
This post is deleted! -
Well, still no joy:(
I get to a screen during the process that says:
iPXE 1.0.0+ (1639) – Open Source Network Boot Firmware – [url]http://ipxe.org[/url]
Features: NFS FTP HTTP HTTPS iSCSI DNS TFTP VLAN AoE bzImage ELF MBOOT PXE PXEXT
Menu
Configuring (net0 a0:1d:48:a9:e6:62)… ok
Could not start download: Operation not supported ([url]http://ipxe.org/3c092003[/url])The reference page at ipxe.org doesn’t make much sense to me, except that it suggests I am trying to use a protocol that is not supported by the ipxe build.
What have I done wrong?!
-
I will try this:
[url]http://www.fogproject.org/wiki/index.php/Chainloading_PXE_to_iPXE_using_pxelinux.0[/url]
-
YYYYYYAAAAAAAAAAAAAYYYYYYYYYY!!!
IT WORKED! IT WORKED!
:D:D:D
I chainloaded PXE to iPXE using pxelinux.0, and now a client machine that is PXE booted resolves to the FOG menu!!
I am very happy!!
Now, what next???
Back to the WIKI/User Guide!
