Computer Wont PXE-boot
-
I installed fog 0.33, after sime obstals and one computer wont pxe boot from fog
It dectes iit. But tftp loads forever? Any help -
How do you mean it loads forever? You mean it gives you the menu, and when you select the menu option the kernel and init.gz file loads forever, or do you mean that it just sits at the loading the menu option?
-
If it’s not getting to the Menu to give you selections, you’ll need to set your router up to forward the tftp side to pxelinux.0
I don’t know your router or your particular setup, but it needs to point back to your FOG Server’s IP address. 127.0.0.1 is not a valid IP Address either as 127.0.0.1 is the localhost address. This means if you used 127.0.0.1 as your servers IP Address, you’ll need to change that to the router assigned IP.
-
Sorry for the late repliy.still not working.
-
mlb2009,
We need more detail to help out. It’s not working doesn’t help anybody assist you. What is the exact messages you’re getting?
Can you take a picture and post it?
Thanks,
-
when i reboot my computer the other computer doesn’t connect to anything at all
do i have to start fog.If so,what command?but before it was tftp wold load forever. Open timeout or something it will say when loading
-
Your FOG Server needs to remain running. It’s the server providing PXE for your clients.
When you installed, did you setup your fog server as the DHCP server?
Is your setup now within your local network? Or did you setup with your public IP Address?
PXE works by linking to the system, so if you’re using Public IP address, it’s being stopped by your router as chances are it’s trying, essentially, to make a loop back to itself which the router typically will not allow. If not, are you sure firewall is not running? You can stop the firewall in Fedora 19 with the commands:
service firewalld stop; chkconfig firewalld offYou understand that PXE only works from the Network Adapter via Cable as well? You’re not attempting to PXE boot over wireless correct?
Again, more information about your specific setup. We can’t help if we don’t have the information.
-
No,i have ethernet pullged in and i am not using public ip.I can (connect to fog mangement)
How can i start the fog server again. I usally use my mac and windows partition.(i have a real mac). -
So you’re trying to image the Macbook (Pro?) using PXE? You’re sure it’s already setup to boot from network and uses the PXE interface? Do you have any other machines (preferably not Apple) to test that the tftp server is working? FOG is not a service persay, it’s a suite of services. Part of the suite is tftp which gets installed. To make sure tftp service is restarted, the best method is to restart the entire server. All services on the server should should have been setup to be started on bootup so a restart is the best method to ensure the system is working properly.
-
[quote=“Tom Elliott, post: 15539, member: 7271”]So you’re trying to image the Macbook (Pro?) using PXE? You’re sure it’s already setup to boot from network and uses the PXE interface? Do you have any other machines (preferably not Apple) to test that the tftp server is working? FOG is not a service persay, it’s a suite of services. Part of the suite is tftp which gets installed. To make sure tftp service is restarted, the best method is to restart the entire server. All services on the server should should have been setup to be started on bootup so a restart is the best method to ensure the system is working properly.[/quote]
I am not trying to boot pxe from mac,i am trying to boot pxe on a non-apple computer. -
mlb2009,
Please provide more information in your posts.
So it never gives you a menu or is it like it can’t find a DHCP server?
-
the non-apple computer it finds a dhcp server but tftp wont load,and it doesnt go to the menu
after i restart the server computer and it doesn’t find the dhcp server.Do i have to start the fog server -
It sounds like you installed the DHCP server on your fog server, and it’s not communicating properly because your router doesn’t know how to pass the information, to the tftp server. What kind of router are you using? Do you have the ability to setup something like:
dhcp-boot=pxelinux.0,fogstorage,192.168.XXX.XXX
or
next-server options,
or
DHCP 66/67 information?Could you try with a switch or hub connected directly to the fog server (bypassing the router) just to see if it can actually communicate with the FOG Server?
