Number of snapins appears limited in PXE boot environment

[David Scott]

We have a number of snapins 27 in total. But when registering a device via the FOG registration on network boot it appears that only 20 are being displayed.

Is this a limit imposed by the system and is it possible to change the number of snapins displayed during device registration?

[Tom Elliott]

@David-Scott I’m. Or sure I follow the problem. The max displayed per page is defaulted to 20. Once that cap is hit it says “Press enter to continue or enter the ids you’d like to add” or something like that. Are you unable to hit enter to see the rest of the list?

[David Scott]

@Tom-Elliott i didn’t think that was an option. Let me check and get back to you.

[David Scott]

@Tom-Elliott this the option that we have.

Pressing enter just continues with the registration process

We are using version 1.5.10

[Tom Elliott]

@David-Scott I see what you’re asking, but if you press enter, it will display the next set in the list. If you enter in an ID and then press enter it will go to the next step assuming you wanted whatever value you entered as the id (or ids) associated to the host you’re registering.

[David Scott]

@Tom-Elliott woo not sure how i managed to miss that but its working as described. Thanks.