Daily wake-up routine not working after update
-
@altitudehack Well when done through Group all it does is create individual tasks for each of the hosts in the group (hence the high number)
As you’re using the 1.5.9.72 version, I think there’s a potential issue with deleting group items in such a way. I’m assuming going back to the group -> power management after you have “deleted it” it has the same task reappeared?
I still believe you will need to clean out the powerManagement table using the
TRUNCATE TABLE powerManagementThen restart the FOGScheduler service and you should then see: 0 scheduled task(s) to run and 0 power management task(s) to run.
Then I think you should use Group -> Task -> Advanced -> WOL. This will create a single task that does the exact same thing (but simpler) for your hosts in that group. It won’t see x number. it will show 1 scheduled task to run.
-
I went ahead and re-created the wakeup cron using the breadcrumbs described and nothing happened in the logs for ~five minutes. So I restarted the service again and now have 79 tasks found:
[04-23-21 3:21:35 pm] * Starting TaskScheduler Service [04-23-21 3:21:35 pm] * Checking for new items every 60 seconds [04-23-21 3:21:35 pm] * Starting service loop [04-23-21 3:21:35 pm] * 79 tasks found. [04-23-21 3:21:35 pm] * 0 scheduled task(s) to run. [04-23-21 3:21:35 pm] * 79 power management task(s) to run. -
@altitudehack I am running a test and just wanted to follow similar route:
Here’s what I see:
[04-23-21 3:25:49 pm] * Starting TaskScheduler Service [04-23-21 3:25:49 pm] * Checking for new items every 60 seconds [04-23-21 3:25:49 pm] * Starting service loop [04-23-21 3:25:49 pm] * 1 task found. [04-23-21 3:25:49 pm] * Power Management Task run time: Fri, 23 Apr 2021 15:50:00 -0500 [04-23-21 3:25:49 pm] * This is a cron style task that should not run now. [04-23-21 3:26:49 pm] * 1 task found. [04-23-21 3:26:49 pm] * Power Management Task run time: Fri, 23 Apr 2021 15:50:00 -0500 [04-23-21 3:26:49 pm] * This is a cron style task that should not run now. -
@tom-elliott said in Daily wake-up routine not working after update:
TRUNCATE TABLE powerManagement
I missed that in your previous post. Thank you! I think this one’s solved!
[04-23-21 3:25:27 pm] * Starting TaskScheduler Service [04-23-21 3:25:27 pm] * Checking for new items every 60 seconds [04-23-21 3:25:27 pm] * Starting service loop [04-23-21 3:25:27 pm] * No tasks found! [04-23-21 3:26:27 pm] * 1 task found. [04-23-21 3:26:27 pm] * 1 scheduled task(s) to run. [04-23-21 3:26:27 pm] * 0 power management task(s) to run.I’ll find out Monday. Have a great weekend, @Tom-Elliott !
-
@altitudehack Thank you, you too
-
Just wanted to follow up. Hopefully all is working as expected now?
-
@tom-elliott Good morning, Tom! When I checked logs this morning it was full of ‘waiting for the interface to come up’ messages. I checked the order of my commands on Friday and can confirm that I did bounce the scheduler service after truncating the table:
1430 2021-04-23 15:25:07 mysql -uroot -p 1431 2021-04-23 15:25:27 systemctl restart FOGSchedulerI’m not sure what I missed. I restarted the service this morning and the interface came up. It looks like the previous logs were lost when I restarted the service.
Thank you for checking in! -
@Tom-Elliott I noticed another update was available yesterday so ran it, rebooted and went to bed. Unfortunately woke up to more
Interface not readymessages…1444 2021-04-26 17:11:15 cd fogproject-dev-branch/ 1445 2021-04-26 17:11:18 git pull 1447 2021-04-26 17:11:47 cd bin 1449 2021-04-26 17:12:01 ./installfog.sh 1450 2021-04-26 17:17:26 reboot ... [04-26-21 5:32:51 pm] Interface not ready, waiting for it to come up: [04-26-21 5:33:01 pm] Interface not ready, waiting for it to come up: [04-26-21 5:33:11 pm] Interface not ready, waiting for it to come up: ... [04-26-21 5:33:21 pm] Interface not ready, waiting for it to come up: [04-26-21 5:33:31 pm] Interface not ready, waiting for it to come up: [04-26-21 5:33:41 pm] Interface not ready, waiting for it to come up:One thing that stands out to me is that the FOG server was rebooted at 5:17 last night, but the first message in the logs was timestamped 5:32. What was happening for those 15 minutes?
I rebooted again this morning and the interface came up immediately. I’ll keep an eye on the logs to see if it goes sideways in a few minutes:
1464 2021-04-27 06:54:30 reboot ... tail /var/log/fog/fogscheduler.log [04-27-21 6:54:59 am] Interface Ready with IP Address: [localIP] [04-27-21 6:54:59 am] Interface Ready with IP Address: 127.0.0.1 [04-27-21 6:54:59 am] Interface Ready with IP Address: 127.0.1.1 [04-27-21 6:54:59 am] Interface Ready with IP Address: fog.my.domain.com [04-27-21 6:54:59 am] * Starting TaskScheduler Service [04-27-21 6:54:59 am] * Checking for new items every 60 seconds [04-27-21 6:54:59 am] * Starting service loop [04-27-21 6:54:59 am] * 1 task found. [04-27-21 6:54:59 am] * 1 scheduled task(s) to run. [04-27-21 6:54:59 am] * 0 power management task(s) to run. -
@altitudehack What’s really strange to me is you should see at least the FOG_WEB_HOST setting.
Can you check disk space and usage for your whole system?
df -hThe fact that FOG_WEB_HOST is coming back with nothing seems to me that the Database is dying or there, somehow, isn’t a defined point for this.
-
# df -hPT Filesystem Type Size Used Avail Use% Mounted on devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 9.0M 1.9G 1% /run tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/mapper/cl_fog-root xfs 16G 6.3G 9.8G 40% / /dev/sda1 xfs 1014M 312M 703M 31% /boot /dev/mapper/cl_fog-var xfs 5.0G 3.4G 1.7G 67% /var /dev/mapper/cl_fog-home xfs 10G 930M 9.1G 10% /home /dev/mapper/fog_images xfs 1.0T 37G 988G 4% /images tmpfs tmpfs 379M 0 379M 0% /run/user/27129 tmpfs tmpfs 379M 0 379M 0% /run/user/0 -
@altitudehack Well, there goes that theory.
Unsure where to look.
Can you check on FOG Configuration -> FOG Settings -> FOG_WEB_HOST (Maybe Web Host on the interface for you?) to see that the web host is defined?
-
@tom-elliott This setting? Haven’t modified it since initial installation:
-
Well crap. It happened again. I was looking away so missed it:
[04-27-21 7:09:59 am] Interface not ready, waiting for it to come up: [04-27-21 7:10:09 am] Interface not ready, waiting for it to come up: [04-27-21 7:10:19 am] Interface not ready, waiting for it to come up:I think the logs are cleaned up a little too quickly for me to catch what’s going on. Any way to use logrotate on them rather than wiping them out upon service restarts?
-
Interesting?
/var/log/fog/servicemaster.log ... [04-27-21 6:54:30 am] Service_Signal_handler (1657) received signal 15. [04-27-21 6:54:30 am] Service_Signal_handler (1657) killing child (1669). [04-27-21 6:54:30 am] Service_Signal_handler (1657) exiting. [04-27-21 6:54:30 am] Service_Signal_handler (1653) received signal 15. [04-27-21 6:54:30 am] Service_Signal_handler (1653) killing child (1673). [04-27-21 6:54:30 am] Service_Signal_handler (1653) exiting. [04-27-21 6:54:30 am] Service_Signal_handler (1652) received signal 15. [04-27-21 6:54:30 am] Service_Signal_handler (1652) killing child (1672). [04-27-21 6:54:30 am] Service_Signal_handler (1652) exiting. [04-27-21 6:54:30 am] Service_Signal_handler (1654) received signal 15. [04-27-21 6:54:30 am] Service_Signal_handler (1654) killing child (5610). [04-27-21 6:54:30 am] Service_Signal_handler (1654) exiting. [04-27-21 6:54:30 am] Service_Signal_handler (1655) received signal 15. [04-27-21 6:54:30 am] Service_Signal_handler (1655) killing child (1671). [04-27-21 6:54:30 am] Service_Signal_handler (1655) exiting. [04-27-21 6:54:30 am] Service_Signal_handler (1658) received signal 15. [04-27-21 6:54:30 am] Service_Signal_handler (1658) killing child (1674). [04-27-21 6:54:30 am] Service_Signal_handler (1658) exiting. [04-27-21 6:54:30 am] Service_Signal_handler (1656) received signal 15. [04-27-21 6:54:30 am] Service_Signal_handler (1656) killing child (1670). [04-27-21 6:54:30 am] Service_Signal_handler (1656) exiting. [04-27-21 6:54:59 am] FOGSnapinReplicator Start [04-27-21 6:54:59 am] FOGSnapinReplicator forked child process (1666). [04-27-21 6:54:59 am] FOGSnapinHash Start [04-27-21 6:54:59 am] FOGSnapinReplicator child process (1666) is running. [04-27-21 6:54:59 am] FOGSnapinHash child process (1667) is running. [04-27-21 6:54:59 am] FOGSnapinHash forked child process (1667). [04-27-21 6:54:59 am] FOGTaskScheduler Start [04-27-21 6:54:59 am] FOGPingHosts Start [04-27-21 6:54:59 am] FOGTaskScheduler forked child process (1668). [04-27-21 6:54:59 am] FOGMulticastManager Start [04-27-21 6:54:59 am] FOGPingHosts forked child process (1669). [04-27-21 6:54:59 am] FOGMulticastManager forked child process (1670). [04-27-21 6:54:59 am] FOGImageReplicator Start [04-27-21 6:54:59 am] FOGMulticastManager child process (1670) is running. [04-27-21 6:54:59 am] FOGPingHosts child process (1669) is running. [04-27-21 6:54:59 am] FOGImageReplicator forked child process (1671). [04-27-21 6:54:59 am] FOGImageSize Start [04-27-21 6:54:59 am] FOGImageReplicator child process (1671) is running. [04-27-21 6:54:59 am] FOGImageSize forked child process (1672). [04-27-21 6:54:59 am] FOGImageSize child process (1672) is running. [04-27-21 6:54:59 am] FOGTaskScheduler child process (1668) is running. [04-27-21 7:04:59 am] FOGTaskScheduler child process (1668) exited with code 255. [04-27-21 7:09:59 am] FOGTaskScheduler forked child process (6149). [04-27-21 7:09:59 am] FOGTaskScheduler child process (6149) is running.What caught my attention was the
FOGTaskScheduler child process (1668) exited with code 255 -
@altitudehack If you need to see more:
tail -1000f /var/log/fog/fogscheduler.log
-
@tom-elliott I used a capital
-Fto persist when a file is changed and redirected it to another temporary log:tail /var/log/fog/fogscheduler.log -F > /var/log/fog/fogscheduler-tailing.logcaught in the act:
[04-27-21 8:46:23 am] * Starting TaskScheduler Service [04-27-21 8:46:23 am] * Checking for new items every 60 seconds [04-27-21 8:46:23 am] * Starting service loop [04-27-21 8:46:23 am] * 1 task found. [04-27-21 8:46:23 am] * 1 scheduled task(s) to run. [04-27-21 8:46:23 am] * 0 power management task(s) to run. [04-27-21 9:01:23 am] ================================== === ==== ===== ==== === ========= == === == === === ======== ==== == ==== === === ======== ==== == ========= === ==== ==== == ========= === ======== ==== == === === === ======== ==== == ==== === === ========= == === == === === ========== ===== ==== ================================== ===== Free Opensource Ghost ====== ================================== ============ Credits ============= = https://fogproject.org/Credits = ================================== == Released under GPL Version 3 == ================================== [04-27-21 9:01:23 am] Interface not ready, waiting for it to come up: [04-27-21 9:01:33 am] Interface not ready, waiting for it to come up: [04-27-21 9:01:43 am] Interface not ready, waiting for it to come up:So, no additional info other than identifying the timestamp.
-
Hi @tom-elliott and @altitudehack!
I can confirm on new install. Debian 10 KVM (no https because Scheduled Power Tasking with https didnt work).
Scheduled Power Management Task is working on Master branch, not working on dev-branch (1.5.9.75).
Master:
[04-27-21 12:42:25 pm] * 1 task found. [04-27-21 12:42:25 pm] * Task run time: Tue, 27 Apr 2021 12:42:00 +0000 [04-27-21 12:42:25 pm] * Found a wake on lan task that should run. [04-27-21 12:42:25 pm] | Task sent to fcaa148962ceAnd looking for tasks every minute.
Dev-branch:
[04-27-21 1:15:12 pm] * 1 task found. [04-27-21 1:15:12 pm] * 0 scheduled task(s) to run. [04-27-21 1:15:12 pm] * 1 power management task(s) to run.No more lines in log. Finishes here. No more checking for tasks in log.
Peter
-
@altitudehack and @Petěrko while I still have no idea what’s happening,
Maybe turning on display_errors and ensuring log_errors are turned on can help us out?
https://serverfault.com/questions/153634/php-exit-status-255-what-does-it-mean#:~:text=255 is an error%2C I,the output of the errorMany different resources of course.
systemclt -l status FOGScheudler
tail -100F /var/log/fog/fogscheduler.log >/var/log/fog/fogscheduler_continued.log &
tail -100f /var/log/fog/fogscheduler_continued.log
journalctl -xe
tail -100F /var/log/php-fpm/www-error.log >/var/log/php-fpm/php-fpm-errors-continued.log &
tail -100f /var/log/php-fpm/php-fpm-errors-continued.logUnsure what else we can try.
-
@tom-elliott said in Daily wake-up routine not working after update:
systemctl -l status FOGScheduler
Apr 27 08:46:23 fog.int.visionary.com env[32561]: PHP Parse error: syntax error, unexpected '}', expecting ';' in /var/www/html/fog/lib/fog/timer.class.php on line 128 -
@altitudehack Okay, fixed the error you saw in the latest if you’d be willing to test?
Thanks for the quick turn around.
