MAC Adreses
-
@tom-elliott So, I tried many values. If I set a lower then 100M value then even if the menu will load and memtest will work the rest of the menu options will run into kernel panic. The PC’s are Celeron 533/128MB.
In VM I tested with 220 MB RAM, 100 for the ramdisk, it works and that seems to be a minimum. So minimum requirement for a PC will be 256 MB :(. That is pretty much I think for the task of capture and deploy a PC. The registration anyway must be done by hand, so I did not test the quick registration requirement. May I change something and renounce at ramdisk? and work somehow as memtest mode? without ramdisk? Or use a network disk for loading what is possible?
Or there is an older version that is running by default with small memory?
thanks. -
@theodor-scherer The best luck you “might” have would be with 0.32. That said, this is a very uncommon thing we have to work with, so I’m still not sure that this is an init problem, but rather a kernel problem.
Can you try an older kernel? These being such old machines, I’m guessing they automatically load the bzImage32/init_32.xz files?
-
@tom-elliott yes, you are right it loads the _32 version. I tried to load many of the kernels i could from kernel updates, with no luck. The kernels and image seems to load fine, and the menu is ok. But after when it realy tries to work, running the commands for registration, or deploying (partimage), it crashes because lack of memory.