I am deploying an image to a HP probook 4520s and during the screen boot I saw that FOG stated unsupported BIOS, but the image seems to be depolying. Is this something I should be concerned about or is there a fix, I have this with other images that have uploaded.

I just noticed I did not see the pro4000 on the hardware list maybe it is a bios error or sorts Ie not supported?

Bios update 2.02 and formatted hard drive to ntfs no partitions and still no luck

Yes it is a windows 7 Image taken from another pro4000 from HP, I have tried to wipe the disk but the error is still present. The Image Management is setup to Multiple Partitions Image-Single Disk not resizable. I am going to try to install win 7 and update the bios and see if this helps

[quote=“ssx4life, post: 3282, member: 268”]Just to confirm you are [B]PUSHING[/B] the image to the 4000 sff? Is this a standard windows 7 image (100mb partition + ntfs non resizable)

I helped someone on edugeek.net with a similar issue - [url]http://www.edugeek.net/forums/o-s-deployment/61956-fog-client-error-cant-have-partition-outside-disk.html[/url] . Long story short… there was a partition table that couldn’t be read by fog, so wiping the drive allowed it to be imaged.[/quote]

What commands do I run in debug mode? I can boot into debug mode and have a prompt of /#. errors when deploying the image these are the errors. I have attached a screen shot of the process

[url=“/_imported_xf_attachments/0/107_Screen shot 1.PNG?:”]Screen shot 1.PNG[/url][url=“/_imported_xf_attachments/0/108_Screen Shot 2.PNG?:”]Screen Shot 2.PNG[/url]

I am getting an error when deploying an image to an HP Pro 4000 small from factor, it gives a type of disk partition error, I have changes the bios to disk IDE to see if that would help but still no luck any advice?

Yes running Ubuntu latest just performed the update seems to be a bit better now along with mysql

My Fog web interface keeps hanging up, it is on a vmware vm with now 2gb of memory and added a 2nd processor and it is still slow. When I first login it seems fine but when I try to navigate and perform a task such as delete an image or image file it takes a long time ie minutes (5-8) and then the page comes back wrong, all the icons are listed down the side and it will not allow to navigate somewhere else. Also when I tried to delete the image file the image name was able to delete but there was an error with the file removal, so I am not sure if there may be a DB error. Any ideas where to look.

Thanks I found the issues, option 60 was used by an old server and once deselected it worked great.

I have just built a new fog box on Ubunto, I can login into the new box and have added a host manually, I am trying to upload the image of the machine and the task starts but the image is not loading. I seems that the PXE boot is not working correctly. I have set the dhcp tick on 66 and 67 on a server 2003 boxes and their is not option for 60 (n/a). Not sure how to further test. Please advise.