They’ve been fine until I’m not sure when. I was imaging them without any problems. I’ve re-up’d the image under 1.2.0 to make sure it wasn’t from .32 just to be safe. Recently I needed to image one, and now PartClone just throws that error and restarts. The image is not corrupt because I can push it down on other machine (HP’s).
PartClone literally gives me no description of what’s happening other than “error exit”.
Fog Version: 1.2.0
Ubuntu: 14.04
I recently tried to image one of our Dell Optiplex 330s and it won’t take. Partclone shows it’s mounting and then displays “error exit” and the computer restarts. I’ve tried with other XP images we have and they don’t seem to work. I’ve also tried it on other Dell models such as the GX620.
However, I can take that same image and push it down on an HP machine. I am also able to upload and image from the Dell computers just not push them down.
[B]EDIT[/B] Here is a picture of the error ([url]http://imgur.com/lMXLyTX[/url])
When I am trying to push down an image on a machine I am brought to the Partclone screen. After hanging there for a few seconds it shows “error exit” and then restarts the client.
I am running FOG 1.2.0
Ubuntu 14.04 (Trusty)
[SIZE=3][FONT=verdana][COLOR=#000000]Running FOG 1.2.0. FOG has been running great up until now. I am trying to image a workstation and am receiving SAN boot 0x80 error. Switched the exit type and the system still freezes.[/COLOR][/FONT][/SIZE]
[SIZE=3][FONT=verdana][COLOR=#000000]Looked at the images and discovered that FOG now does not see the image size. I looked at the server and the image is still in /images/(imagename).[/COLOR][/FONT][/SIZE]
[SIZE=3][FONT=verdana][COLOR=#000000]How am I able to get FOG to recognize the image again so I can image these workstations?[/COLOR][/FONT][/SIZE]
[SIZE=3][FONT=verdana][COLOR=#000000]Screenshot for better understanding - [URL=‘http://imgur.com/a/omBfP#0’][COLOR=#336699]http://imgur.com/a/omBfP#0[/COLOR][/URL][/COLOR][/FONT][/SIZE]
[SIZE=3][FONT=verdana][COLOR=#000000]I believe this is why I am not able to image.[/COLOR][/FONT][/SIZE]
[B]EDIT[/B] If I create a task it will load to part clone but then I receive “/dev/sda1 is mounted at error exit”
[B]EDIT #2 [/B]I seemed to have fixed the problem by updating the server itself.